Husqvarna 323HD60, 325HD60X-Series, 325HD75X-Series Starting and Stopping, Check before starting

Page 12

STARTING AND STOPPING

Check before starting

•Inspect the working area. Remove any objects that could be thrown out.

•Check the cutting attachment. Never use blades that are dull, cracked or damaged.

•Check that the machine is in perfect working order. Check that all nuts and screws are tight.

•Make sure the gear housing is lubricated correctly. See instructions under the heading Gear housing.

•Check that the cutting attachment always stops when the engine is idling.

•Only use the machine for the purpose it was intended for.

•Make sure that the handle and safety features are in good working order. Never use a machine that lacks a part or has been modified outside its specifications.

•All covers must be correctly fitted and undamaged before you start the machine.

Starting and stopping

WARNING! The complete clutch cover and

!gear housing must be fitted before the machine is started, otherwise the clutch may come loose and cause personal injury.

Always move the machine about 3 metres from the refuelling position before starting. Place the machine on a firm surface. Remember that the blades may start to move when the engine is started. Make sure the blades cannot come into contact with any object. Make sure that no unauthorised persons are in the working area, otherwise there is a risk of serious personal injury. The safety distance is 15 metres.

Cold engine

Primer bulb:

Press the air purge repeatedly until fuel begins to fill the bulb. The bulb need not be completely filled.

Choke:

Set the choke control in the choke position.

A

Warm engine

Primer bulb:

Press the air purge repeatedly until fuel begins to fill the bulb. The bulb need not be completely filled.

12 – English

Page 11 Page 13
Image 12
Page 11 Page 13
Contents 323HD60 325HD60X-series KEY to Symbols SymbolsContents Introduction Dear CustomerWhat is WHAT? What is what?General Safety Precautions Personal protective equipmentMachine′s safety equipment Stop switchThrottle lock Hand guardVibration damping system MufflerGear housing BladesBlade guard Fuel safety Fuel HandlingFuel Fuelling MixingStarting and Stopping Check before startingStarting and stopping Cold engineStarting StoppingSafety instructions regarding the surroundings Safety instructions while workingWorking Techniques General working instructionsSafety instructions after completing work Basic working techniques325HD60, 325HD75 Maintenance CarburettorFine adjustment of the idle speed T Correctly adjusted carburettorMuffler High speed jet HCleaning the air filter Cooling systemSpark plug Air filterGear housing Cleaning and lubricationMaintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataEC-declaration of conformity Applies to Europe only Cispr 121997, EN774Page 1150087-26 ´z+Rh¶6+¨ ´z+Rh¶6+¨

323HD60, 325HD60X-Series, 325HD75X-Series specifications

The Husqvarna 323HD60, 325HD60X-Series, and 325HD75X-Series are cutting-edge hedge trimmers designed for professional landscapers and gardening enthusiasts alike. These powerful tools combine innovative technology with ergonomic design, making them efficient and comfortable to use for extended periods.

The Husqvarna 323HD60 is equipped with a robust 21.7 cc, 2-stroke engine, providing the power needed to tackle tough hedges. Its professional-grade build includes a dual-action blade that features hardened steel for improved durability and cutting efficiency. The cutting length of 60 cm allows users to manage taller hedges with ease, while the 28 mm tooth spacing ensures precise cutting even through larger branches.

Moving on to the 325HD60X-Series, this model enhances the user experience with an increased cutting length of 60 cm and an impressive 25.4 cc engine that offers higher performance. This series also introduces an advanced cooling system designed to extend engine life during demanding tasks. The user-friendly starting system minimizes effort, making these hedge trimmers accessible for all skill levels. Additionally, the 325HD60X features vibration dampening technology that significantly reduces fatigue, allowing for longer work sessions without discomfort.

For those requiring even more power, the 325HD75X-Series rises to the occasion. Featuring a powerful 25.4 cc engine and a longer 75 cm cutting blade, this model is perfect for larger hedges or intricate topiary work. The design includes an adjustable rear handle that allows for easy maneuvering and optimal control, making it suitable for both vertical and horizontal cuts. The dual-reciprocating cutting blades provide clean cuts and minimize the risk of damage to plants, leading to healthier growth.

Both the 325HD60X and 325HD75X-Series models incorporate Air Injection technology, which helps boost performance by keeping the air filter cleaner for longer periods. This results in reduced maintenance and extended intervals between servicing. Moreover, the intelligent design features a sturdy carrying strap, ensuring comfort during operation.

In summary, Husqvarna's 323HD60, 325HD60X-Series, and 325HD75X-Series hedge trimmers exemplify a blend of power, precision, and comfort. With advanced features like dual-action blades, vibration dampening, and efficient cooling systems, these tools are built for the demanding tasks faced by professionals and provide exceptional results in any landscaping project.
Top Page Image Contents