Husqvarna 324HDA55 manual Fuel Handling

Page 13

FUEL HANDLING

Fuel

CAUTION! The machine is equipped with a four-stroke engine. Make sure that there is always sufficient oil in the oil tank.

WARNING! Always ensure there is adequate

!ventilation when handling fuel.

The catalytic converter muffler gets very hot during and after use. This also applies during idling. Be aware of the fire hazard, especially when working near flammable substances and/or vapours.

Gasoline

•Use high-grade unleaded petrol of at least 86 octane.

•If the machine is not used for some time the fuel tank should be emptied and cleaned.

Engine oil

Check the oil level before starting the machine. A too low oil level can cause serious damage to the engine.

When the machine is new the engine oil should be changed after the first month or after 10 hours of operation.

•For the best result and function use HUSQVARNA engin oil.

•When HUSQVARNA engine oil is not available another high grade engine oil can be used. Contact your dealer when selecting oil. Mineral oil or semisynthetic oil should be used. In general SAE 10W-40 is recommended.

•Never use oil intended for two-stroke engines.

Oil level

The machine must be switched off and placed on a flat surface when you check the oil level.

Unscrew the oil cap, clean the dipstick located on the cap and insert the cap again without screwing it down. Check the oil level on the dipstick.

When the oil level is low, top up using engine oil to the edge of the oil refill hole.

Only use recommended engine oil.

Fuelling

WARNING! Taking the following precautions,

!will lessen the risk of fire:

Do not smoke or place hot objects near fuel.

Always shut off the engine before refuelling.

When refuelling, open the fuel cap slowly so that any excess pressure is released gently.

Tighten the fuel cap carefully after refuelling.

Always move the machine away from the refuelling area before starting.

Clean around the fuel cap. Clean the fuel and oil tank regularly. The fuel filter should be changed at least once a year. Contamination in the tanks causes malfunction.

Always move the machine about 3 metres from the refuelling position before starting.

English – 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 324HDA55X-series Symbols KEY to SymbolsContents Machine′s safety equipment Safety InstructionsStop switch Personal protective equipmentVibration damping system Hand guardMuffler Blade guardSafety Instructions Blades Gear housingFuel safety General safety precautionsStarting Transport and storageSafety instructions regarding the surroundings Safety instructions when using the hedge trimmerSafety instructions while working Personal protectionBasic working techniques Safety instructions after completing workChanging the hedge trimmer angle What is what? What is WHAT?Fitting the hand guard and loop handle AssemblyFitting the cutting head Fuel Fuel HandlingCheck before starting Starting and StoppingStarting and stopping Carburettor MaintenanceMuffler Cooling systemCleaning and lubrication Gear housingCleaning the air filter Air filterDaily maintenance Maintenance scheduleWeekly maintenance Monthly maintenanceTechnical data Technical DataYour Warranty Rights and Obligations Federal Emission Control Warranty Statement1140260-95 ´z+H¶5w¨ ´z+H¶5w¨

324HDA55 specifications

The Husqvarna 324HDA55 is a powerful and efficient hedge trimmer designed for both professional landscapers and homeowners looking to maintain their garden. Known for its innovative technologies and impressive performance, this model boasts a range of features that make it a top choice for hedge trimming tasks.

One of the standout features of the 324HDA55 is its robust engine. Powered by a reliable and efficient 25.4 cc two-stroke engine, this trimmer offers a perfect balance of power and weight, making it manageable for extended use without causing fatigue. This engine is designed to deliver high cutting performance, making it suitable for a wide range of hedge trimming applications.

The dual-sided blade is another notable aspect of the Husqvarna 324HDA55. The 55 cm long cutting blade features sharp, dual-action teeth that ensure effective and smooth cutting action. This design reduces vibrations, providing a comfortable experience during operation. The blades also have an optimized geometry that allows for precise cutting, making it easy to shape and maintain hedges of various sizes and styles.

Ergonomics and user comfort are key considerations in the design of the 324HDA55. The adjustable rear handle allows users to find the most comfortable grip position, enabling versatile cutting angles. Additionally, the trimmer’s lightweight design enhances maneuverability, reducing user fatigue during longer work sessions.

The Husqvarna 324HDA55 also incorporates advanced technology to improve efficiency and control. It features a low vibration system that significantly reduces fatigue during extended use. This system, along with the air injection technology, keeps the air filter cleaner for longer, resulting in reduced maintenance and increased uptime.

Safety is paramount when it comes to power tools, and the 324HDA55 includes protective features to ensure a secure operation. The trimmer is equipped with a two-step start mechanism, preventing unintended starting, and features a safety switch that stops the engine when not in use.

In summary, the Husqvarna 324HDA55 hedge trimmer combines power, efficiency, and user-friendly features, making it an excellent choice for anyone looking to maintain their garden's hedges. With its durable construction, advanced technology, and ergonomic design, it stands out as a reliable tool for achieving precision and performance in hedge trimming tasks.
Top Page Image Contents