Husqvarna 324HDA55 manual Maintenance schedule, Daily maintenance, Weekly maintenance

Page 17

MAINTENANCE

Maintenance schedule

Below you will find some general maintenance instructions. If you need further information please contact your service workshop.

Daily maintenance

•Check throttle trigger and throttle trigger lockout function.

•Check that the stop switch works correctly.

•Check that the blades do not move when the engine is idling or when the choke is in the start throttle position.

•Clean the outside of the machine.

•Check that the harness is undamaged.

•Check that the blade guard is not damaged or cracked. Replace the blade guard if it is exposed to impact or is cracked.

•Check that the blade is properly centered, sharp and without cracks.

•Check that the hand guard is not damaged. Replace the guard if damaged.

•Check that the screws that hold the blades together are correctly tightened.

•Check that the transport guard for the blade is intact and that it can be secured correctly.

•Check that nuts and screws are tight.

•Check that there are no fuel leaks from the engine, tank or fuel lines.

•Check the oil level.

Weekly maintenance

•Check the starter and starter cord.

•Check that the vibration damping elements are not damaged.

•Clean the carburettor area.

•Clean the outside of the spark plug. Remove it and check the electrode gap. Adjust the gap to 0,6-0,7 mm, or replace the spark plug. Check that the spark plug is fitted with a suppressor.

•Clean the cooling fins on the cylinder and check that the air intake near the starter is not blocked.

•Fill the gear housing with grease. This should be carried out approximately every 20 working hours.

•Clean the air filter.

Monthly maintenance

•Clean the fuel tank.

•Clean the outside of the carburettor and the space around it.

•Clean the fan and the area around it.

•Check fuel hose for cracks or other damage. Change if necessary.

•Change the fuel filter in fuel tank.

•Check the clutch, clutch springs and the clutch drum for wear. Replace if necessary.

•Check electrical wires and connections.

•Replace the spark plug. Check that the spark plug is fitted with a suppressor.

•Change the air filter.

•Check and clean the spark arrestor mesh on the muffler.

•Change the engine oil.

English – 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents 324HDA55X-series Symbols KEY to SymbolsContents Machine′s safety equipment Safety InstructionsStop switch Personal protective equipmentVibration damping system Hand guardMuffler Blade guardSafety Instructions Blades Gear housingFuel safety General safety precautionsStarting Transport and storageSafety instructions regarding the surroundings Safety instructions when using the hedge trimmerSafety instructions while working Personal protectionChanging the hedge trimmer angle Safety instructions after completing workBasic working techniques What is what? What is WHAT?Fitting the cutting head AssemblyFitting the hand guard and loop handle Fuel Fuel HandlingStarting and stopping Starting and StoppingCheck before starting Carburettor MaintenanceMuffler Cooling systemCleaning and lubrication Gear housingCleaning the air filter Air filterDaily maintenance Maintenance scheduleWeekly maintenance Monthly maintenanceTechnical data Technical DataYour Warranty Rights and Obligations Federal Emission Control Warranty Statement1140260-95 ´z+H¶5w¨ ´z+H¶5w¨

324HDA55 specifications

The Husqvarna 324HDA55 is a powerful and efficient hedge trimmer designed for both professional landscapers and homeowners looking to maintain their garden. Known for its innovative technologies and impressive performance, this model boasts a range of features that make it a top choice for hedge trimming tasks.

One of the standout features of the 324HDA55 is its robust engine. Powered by a reliable and efficient 25.4 cc two-stroke engine, this trimmer offers a perfect balance of power and weight, making it manageable for extended use without causing fatigue. This engine is designed to deliver high cutting performance, making it suitable for a wide range of hedge trimming applications.

The dual-sided blade is another notable aspect of the Husqvarna 324HDA55. The 55 cm long cutting blade features sharp, dual-action teeth that ensure effective and smooth cutting action. This design reduces vibrations, providing a comfortable experience during operation. The blades also have an optimized geometry that allows for precise cutting, making it easy to shape and maintain hedges of various sizes and styles.

Ergonomics and user comfort are key considerations in the design of the 324HDA55. The adjustable rear handle allows users to find the most comfortable grip position, enabling versatile cutting angles. Additionally, the trimmer’s lightweight design enhances maneuverability, reducing user fatigue during longer work sessions.

The Husqvarna 324HDA55 also incorporates advanced technology to improve efficiency and control. It features a low vibration system that significantly reduces fatigue during extended use. This system, along with the air injection technology, keeps the air filter cleaner for longer, resulting in reduced maintenance and increased uptime.

Safety is paramount when it comes to power tools, and the 324HDA55 includes protective features to ensure a secure operation. The trimmer is equipped with a two-step start mechanism, preventing unintended starting, and features a safety switch that stops the engine when not in use.

In summary, the Husqvarna 324HDA55 hedge trimmer combines power, efficiency, and user-friendly features, making it an excellent choice for anyone looking to maintain their garden's hedges. With its durable construction, advanced technology, and ergonomic design, it stands out as a reliable tool for achieving precision and performance in hedge trimming tasks.
Top Page Image Contents