OIL and Fuel Information

OIL AND FUEL MIXING INSTRUCTIONS

Old and/or improperly mixed fuel are the main reasons for the unit not running properly. Be sure to use fresh, (less than 30 days old) clean unleaded fuel. Follow the instructions carefully for the proper fuel/oil mixture.

Definition of Blended Fuels

Today's fuels are often a blend of gasoline and oxy- genates such as ethanol, methanol, or MTBE (ether). Alcohol-blended fuel absorbs water. As little as 1% water in the fuel can make fuel and oil separate and leads to formation of acids during storage. When using alcohol- blended fuel, use fresh fuel.

Using Blended Fuels

If you choose to use a blended fuel, or its use is unavoid- able, follow recommended precautions:

•Always use the fresh fuel mix explained in your opera- tor's manual

•Always agitate the fuel mix before fueling the unit

•Drain the tank and run the engine dry before storing the unit

Using Fuel Additives

The bottle of 2-cycle oil that came with your unit contains a fuel additive which will help inhibit corrosion and mini- mize the formation of gum deposits. It is recommended that you use our 2-cycle oil with this unit.

If unavailable, use a good 2-cycle oil designed for air-cooled engines along with a fuel additive, such as STA-BIL®Gas Stabilizer or an equivalent. Add 0.8 oz.

(23 ml.) of fuel additive per gallon of fuel according to the instructions on the container. NEVER add fuel additives directly to the unit's fuel tank.

CAUTION: For proper engine operation and maxi-

mum reliability, pay strict attention to the oil and fuel mixing instructions on the

2-cycle oil container. Using improperly mixed fuel can severely damage the engine.

To Obtain Correct Fuel Mix:

Thoroughly mix the proper ratio of 2-cycle engine oil with unleaded gasoline in a separate fuel can. Use a 40:1 fuel/oil ratio. Do not mix them directly in the engine fuel tank. See the table below for specific gas and oil mixing ratios.

NOTE: One gallon (3.8 liters) of unleaded gasoline mixed with one 3.2 oz. (95 ml.) bottle of

2-cycle oil makes a 40:1 fuel/oil ratio.


		+
		+



UNLEADED GAS			2 CYCLE OIL

1 GALLON US			3.2 FL. OZ.
(3.8 LITERS)			(95 ml)

	1 LITER		25 ml

MIXING RATIO - 40:1

WARNING: Gasoline is extremely flamma-

ble. Ignited Vapors may explode. Always stop the engine and allow it to cool before filling the fuel tank. Do not smoke while fill- ing the tank. Keep sparks and open flames at a distance from the area.

WARNING: Remove fuel cap slowly to avoid injury

from fuel spray. Never operate the unit without the fuel cap securely in place.

WARNING: Add fuel in a clean, well ventilated out-

door area. Wipe up any spilled fuel immedi- ately. Avoid creating a source of ignition for spilled fuel. Do not start the engine until fuel vapors dissipate.

NOTE: Dispose of the old fuel/oil mix in accordance to Federal, State and Local regulations.

tb25ght specifications

The Troy-Bilt TB25GHT is a versatile and robust string trimmer designed for homeowners and landscapers who demand reliability and performance. Renowned for its innovative features, the TB25GHT is engineered to tackle a wide variety of trimming tasks effectively, ensuring a well-manicured lawn and garden.

One of the standout features of the TB25GHT is its powerful 25cc 2-cycle engine. This engine delivers ample power for cutting through tough grass and weeds while maintaining relatively low fuel consumption. This efficiency not only saves gas but also reduces emissions, making it an environmentally friendly choice. The trimmer is equipped with a SpringAssist™ starting system, which significantly reduces the amount of effort needed to start the engine. With this feature, users spend less time struggling with heavy pull cords and more time getting the job done.

The TB25GHT showcases a dual line feed head that enables the user to quickly and easily reload trimmer line. The 18-inch cutting width ensures that users can cover more ground in less time, making it an excellent choice for larger properties and commercial applications. The trimmer is designed for ease of use, featuring an adjustable handle that provides optimal comfort during operation. The lightweight design ensures that users can operate the machine for extended periods without experiencing significant fatigue.

Another notable characteristic of the TB25GHT is its versatile attachment capability. This trimmer can accommodate a range of attachments, such as edgers, blowers, and hedge trimmers, converting it into a multi-functional tool suitable for various landscaping tasks. This flexibility allows users to maintain their outdoor spaces year-round with just one power unit.

In addition to its impressive performance, the TB25GHT is built with durability in mind. The robust construction can withstand the rigors of regular use, and the components are designed to resist wear and tear. Whether you’re trimming around flower beds, edging sidewalks, or clearing out overgrown areas, the Troy-Bilt TB25GHT offers a reliable and effective solution that blends power and convenience. It’s a worthy investment for anyone looking to enhance their lawn care routine with a dependable and efficient trimmer.