Important Safety Precautions

IMPORTANT (for U.K. Customers)

DO NOT cut off the mains plug from this equipment.

If the plug ﬁtted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer.

If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply.

If this product is not provided with a mains plug, or one has to be ﬁtted, then follow the instructions given below:

IMPORTANT. DO NOT make any connection to the larger terminal which is marked with the letter E or by the safety earth symbol • or coloured GREEN or GREEN-and-

YELLOW.

The wires in the mains lead on this product are coloured in accordance with the following code:

BLUE: NEUTRAL

BROWN: LIVE

As these colours may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured

BLACK.

The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.

When replacing the fuse only a correctly rated approved type should be used and be sure to re-ﬁt the fuse cover.

IF IN DOUBT — CONSULT A COMPETENT ELECTRICIAN.

For U.S.A

TO THE USER

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residental area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

CAUTION

Changes or modifications to this equipment not expressly approved by TEAC CORPORATION for compliance could void the user’s authority to operate this equipment.

For the consumers in Europe

WARNING

This is a Class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures.

Pour les utilisateurs en Europe

AVERTISSEMENT

Il s’agit d’un produit de Classe A. Dans un environnement domestique, cet appareil peut provoquer des interférences radio, dans ce cas l’utilisateur peut être amené à prendre des mesures appropriées.

Für Kunden in Europa

Warnung

Dies is eine Einrichtung, welche die Funk-Entstörung nach Klasse A besitzt. Diese Einrichtung kann im Wohnbereich Funkstörungen versursachen ; in diesem Fall kann vom Betrieber verlang werden, angemessene Maßnahmen durchzuführen und dafür aufzukommen.

2 TASCAM IF-AE8

IF-AE8 specifications

The Tascam IF-AE8 is a powerful audio interface specifically designed for use with Tascam's series of digital mixers and recording systems. Its versatility and high-quality performance make it an ideal choice for audio engineers and musicians who demand exceptional sound quality and flexible connectivity options.

One of the standout features of the IF-AE8 is its capability to provide eight channels of analog input and output. This allows users to connect a wide variety of audio sources, including microphones, instruments, and line-level devices, providing the flexibility needed for complex recording setups. The interface is equipped with high-quality ADAT and AES/EBU digital outputs, allowing for seamless integration into digital recording environments.

The IF-AE8 employs advanced conversion technology that ensures pristine audio fidelity. With high-resolution 24-bit/192 kHz digital conversion, users can expect rich detail and clarity in their recordings. This is particularly advantageous in professional settings where audio quality is paramount. Furthermore, the unit features a dynamic range that minimizes distortion, resulting in clean and powerful audio capture.

Another defining characteristic of the IF-AE8 is its intuitive design, which simplifies operation for users at all levels of experience. The interface includes a clear LED display that provides real-time feedback on input levels and signal processing, making it easy to monitor audio levels during recording or mixing sessions. Additionally, the unit is compact and rugged, making it suitable for both studio and live applications.

The IF-AE8 also supports the use of real-time DSP processing, enabling users to apply various effects and enhancements without the need for external software plugins. This functionality can significantly streamline the recording process and improve the overall workflow in a studio environment.

Compatibility is yet another key aspect of the Tascam IF-AE8. It integrates seamlessly with Tascam’s range of digital mixers, like the Model 24 and Model 16, as well as other audio recording systems. This versatility ensures that users can expand their existing setups without hassle.

In summary, the Tascam IF-AE8 is a robust audio interface that combines excellent sound quality, user-friendly features, and flexible connectivity options. Whether for recording music, sound design, or live sound applications, the IF-AE8 stands out as a reliable and effective solution for professional audio needs.