Ryobi 875r OIL and Fuel Information, Recommended OIL Type, Adding OIL to Crankcase Initial USE

Page 10

OIL AND FUEL INFORMATION

RECOMMENDED OIL TYPE

Using the proper type and weight of oil in the crankcase is extremely important. Check the

oil before each use and change the oil regularly. Failure to use the correct oil, or

using dirty oil, can cause premature engine wear and failure.

Use a high-quality SAE 30 weight oil of API (American Petroleum Institute) service class SF, SG, SH.

ADDING OIL TO CRANKCASE – INITIAL USE

NOTE: This unit is shipped without being filled with oil. In order to avoid damage to the unit, put oil in the crankcase before attempting to start unit.

Your unit is supplied with one 3.4 fluid oz. (100 ml.) bottle of SAE 30 SF, SG, SH oil (Fig. 4).

NOTE: Save the bottle to measure the correct amount for future oil changes. See Changing the Oil Pg. 19.

1.Unscrew the top of the bottle of oil and remove the paper seal covering the opening. Replace top. Cut the tip off the funnel spout (Fig. 4).

Funnel Spout

Fig. 4

2.Place the unit on a flat level surface.

3.Remove the oil plug / dipstick from the crankcase (Fig. 5).

O-Ring

Oil Fill Plug/Dipstick

Oil Fill Hole

4.Pour the entire bottle of oil into the oil fill hole (Fig. 6).

Oil Fill

Fig. 6

NOTE: Never add oil to the fuel or fuel tank.

5.Wipe up any oil that may have spilled and reinstall the oil fill plug / dipstick.

The importance of checking and maintaining the proper oil level in the crankcase cannot be overemphasized. Check oil before each use and change as needed. See Changing the Oil Pg. 19.

Fig. 5

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents OPERATOR’S Manual Table of Contents IntroductionCalifornia Emission Regulations Spark ArrestorRules for Safe Operation Symbol MeaningSafety Warnings for GAS Trimmers Before OperatingOther Safety Warnings While OperatingFor Service INFORMATION, Call Safety and International SymbolsSymbolmeaning Safety Alert Symbol Unleaded FuelHOT Surface Warning ON/OFF Stop ControlSharp Blade Choke Control Know Your Unit ApplicationsAssembly Instructions Adjusting the J-HANDLERecommended OIL Type OIL and Fuel InformationAdding OIL to Crankcase Initial USE Recommended Fuel Type Using Blended FuelsUsing Fuel Additives Fueling UnitStopping Instructions STARTING/STOPPING InstructionsStarting Instructions Cold Start First Start of the Day or Engine Ran Out of FuelOperating the CLICK-LINKSYSTEM Installing the Cutting Attachment or Add-OnsOperating Instructions Removing the Cutting Attachment or Add-OnsHolding the Trimmer Adjusting Trimming Line LengthTips for Best Trimming Results Frequency Maintenance Required Refer to Maintenance and Repair InstructionsMaintenance Schedule Decorative TrimmingLine Installation for the Speedspool Winding the Inner Reel With New LineInstalling a Prewound Reel Releasing the Inner ReelSpeedspool Replacement Parts Cleaning the SpeedspoolChecking the OIL Level Changing the OILAIR Filter Maintenance Cleaning the Air FilterAdjust Idle Speed Screw Carburetor AdjustmentClean Air Filter Check FuelRocker ARM Clearance Remove the rocker arm cover and gasketRocker Arms Adjusting Nuts Feeler Gauge Gasket ACCESSORIES/REPLACEMENT Parts Spark Arrestor MaintenanceReplacing the Spark Plug Storage Cleaning and StorageCleaning Long Term StorageU S E TroubleshootingT I O N Specifications EnginePage Owners Warranty Responsibilities Manufacturers Warranty CoverageOPERATOR’S Manual Part no REV. a

875r specifications

The Ryobi 875R is a robust and efficient string trimmer that has garnered attention for its reliability and performance. Designed for homeowners and landscaping professionals alike, this trimmer offers a powerful solution for maintaining lawns and gardens with ease.

One of the standout features of the Ryobi 875R is its powerful gas engine, which provides ample power for cutting through thick grass and weeds without bogging down. This gasoline-powered trimmer operates efficiently, making it suitable for larger areas where electric trimmers might struggle. The engine is designed for easy starting, ensuring that users can get to work quickly without the frustration of repeated pulls on the starter cord.

The Ryobi 875R also boasts a lightweight, ergonomic design that enhances maneuverability. Its balance and reduced weight allow for longer use without causing undue strain on the user’s arms and back. The adjustable handle is another ergonomic feature, enabling users to find the perfect grip and position for their comfort during extended trimming sessions.

A significant technological highlight of the 875R is its dual-string head. This feature allows for a wider cutting swath, making it possible to trim more grass in less time. The trimmer excels in tackling difficult areas of the yard, from edges along sidewalks to dense patches in flower beds. This dual-string system is also compatible with various types of trimmer lines, providing versatility based on user preference and job requirements.

Another key characteristic of the Ryobi 875R is its durable construction. The materials used in its design are intended to withstand the rigors of regular use, protecting it against wear and tear. Additionally, the trimmer is equipped with features such as a protective shield that safeguards the user from flying debris while enhancing safety during operation.

Maintenance is simplified with the Ryobi 875R, as it features an easy-access air filter and fuel cap that facilitate routine checks and refills. This ensures that users can dedicate their time to trimming rather than struggling with upkeep.

In summary, the Ryobi 875R stands out in the market for its powerful engine, ergonomic design, dual-string head technology, and durability. Whether tackling overgrown lawns or maintaining garden borders, this string trimmer delivers the performance and ease of use that both novices and seasoned landscapers appreciate.
Top Page Image Contents