Ryobi 875r manual While Operating, Other Safety Warnings

Page 5

RULES FOR SAFE OPERATION

WHILE OPERATING

•Never start or run the unit inside a closed room or building. Breathing exhaust fumes can kill. Operate this unit only in a well ventilated area outdoors.

•Wear safety glasses or goggles that are marked as meeting ANSI Z87.1-1989 standards, and ear/hearing protection when operating this unit. Wear a face or dust mask if the operation is dusty. Long sleeve shirts are recommended.

•Wear heavy, long pants, boots and gloves. Do not wear loose clothing, jewelry, short pants, sandals or go barefoot. Secure hair above shoulder level.

•The cutting attachment shield must always be in place while operating the unit. Do not operate unit without both trimming lines extended, and the proper line installed. Do not extend the trimming line beyond the length of the shield.

•This unit has a clutch. The cutting attachment remains stationary when the engine is idling. If it does not, have the unit adjusted by an authorized service technician.

•Adjust the J-Handle to your size to provide the best grip.

•Be sure the cutting attachment is not in contact with anything before starting the unit.

•Use the unit only in daylight or good artificial light.

•Avoid accidental starting. Be in the starting position whenever pulling the starter rope. The operator and unit must be in a stable position while starting. See Starting/Stopping Instructions.

•Use the right tool. Only use this tool for the purpose intended.

•Do not overreach. Always keep proper footing and balance.

•Always hold the unit with both hands when operating. Keep a firm grip on both the front and rear handle or grips.

•Keep hands, face, and feet at a distance from all moving parts. Do not touch or try to stop the cutting attachment when it is rotating.

•Do not touch the engine or muffler. These parts get extremely hot from operation. When turned off they remain hot for a short time.

•Do not operate the engine faster than the speed needed to cut, trim or edge. Do not run the engine at high speed when not cutting.

•Always stop the engine when cutting is delayed or when walking from one cutting location to another.

•If you strike or become entangled with a foreign object, stop the engine immediately and check for damage. Do not operate before repairing damage. Do not operate the unit with loose or damaged parts.

•Stop and switch the engine to off for maintenance, repair, or for changing the cutting attachment or other attachments.

•Use only genuine Ryobi replacement parts when servicing this unit. These parts are available from your authorized service dealer. Do not use parts, accessories or attachments not authorized by Ryobi for this unit. Doing so could lead to serious injury to the user, or damage to the unit, and void your warranty.

•Keep unit clean of vegetation and other materials. They may become lodged between the cutting attachment and shield.

•To reduce fire hazard, replace faulty muffler and spark arrestor, keep the engine and muffler free from grass, leaves, excessive grease or carbon build up.

OTHER SAFETY WARNINGS

•Never store the unit, with fuel in the tank, inside a building where fumes may reach an open flame or spark.

•Allow the engine to cool before storing or transporting. Be sure to secure the unit while transporting.

•Store the unit in a dry area, locked up or up high to prevent unauthorized use or damage, out of the reach of children.

•Never douse or squirt the unit with water or any other liquid. Keep handles dry, clean and free from debris. Clean after each use, see Cleaning and Storage instructions.

•Keep these instructions. Refer to them often and use them to instruct other users. If you loan someone this unit, also loan them these instructions.

SAVE THESE INSTRUCTIONS

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents OPERATOR’S Manual Introduction Table of ContentsSpark Arrestor California Emission RegulationsSafety Warnings for GAS Trimmers Symbol MeaningRules for Safe Operation Before OperatingWhile Operating Other Safety WarningsSymbolmeaning Safety Alert Symbol Safety and International SymbolsFor Service INFORMATION, Call Unleaded FuelSharp Blade Choke Control ON/OFF Stop ControlHOT Surface Warning Applications Know Your UnitAdjusting the J-HANDLE Assembly InstructionsAdding OIL to Crankcase Initial USE OIL and Fuel InformationRecommended OIL Type Using Fuel Additives Using Blended FuelsRecommended Fuel Type Fueling UnitStarting Instructions STARTING/STOPPING InstructionsStopping Instructions Cold Start First Start of the Day or Engine Ran Out of FuelOperating Instructions Installing the Cutting Attachment or Add-OnsOperating the CLICK-LINKSYSTEM Removing the Cutting Attachment or Add-OnsTips for Best Trimming Results Adjusting Trimming Line LengthHolding the Trimmer Maintenance Schedule Maintenance and Repair InstructionsFrequency Maintenance Required Refer to Decorative TrimmingWinding the Inner Reel With New Line Line Installation for the SpeedspoolReleasing the Inner Reel Installing a Prewound ReelCleaning the Speedspool Speedspool Replacement PartsChanging the OIL Checking the OIL LevelCleaning the Air Filter AIR Filter MaintenanceClean Air Filter Carburetor AdjustmentAdjust Idle Speed Screw Check FuelRemove the rocker arm cover and gasket Rocker ARM ClearanceRocker Arms Adjusting Nuts Feeler Gauge Gasket Replacing the Spark Plug Spark Arrestor MaintenanceACCESSORIES/REPLACEMENT Parts Cleaning Cleaning and StorageStorage Long Term StorageT I O N TroubleshootingU S E Engine SpecificationsPage Manufacturers Warranty Coverage Owners Warranty ResponsibilitiesREV. a OPERATOR’S Manual Part no

875r specifications

The Ryobi 875R is a robust and efficient string trimmer that has garnered attention for its reliability and performance. Designed for homeowners and landscaping professionals alike, this trimmer offers a powerful solution for maintaining lawns and gardens with ease.

One of the standout features of the Ryobi 875R is its powerful gas engine, which provides ample power for cutting through thick grass and weeds without bogging down. This gasoline-powered trimmer operates efficiently, making it suitable for larger areas where electric trimmers might struggle. The engine is designed for easy starting, ensuring that users can get to work quickly without the frustration of repeated pulls on the starter cord.

The Ryobi 875R also boasts a lightweight, ergonomic design that enhances maneuverability. Its balance and reduced weight allow for longer use without causing undue strain on the user’s arms and back. The adjustable handle is another ergonomic feature, enabling users to find the perfect grip and position for their comfort during extended trimming sessions.

A significant technological highlight of the 875R is its dual-string head. This feature allows for a wider cutting swath, making it possible to trim more grass in less time. The trimmer excels in tackling difficult areas of the yard, from edges along sidewalks to dense patches in flower beds. This dual-string system is also compatible with various types of trimmer lines, providing versatility based on user preference and job requirements.

Another key characteristic of the Ryobi 875R is its durable construction. The materials used in its design are intended to withstand the rigors of regular use, protecting it against wear and tear. Additionally, the trimmer is equipped with features such as a protective shield that safeguards the user from flying debris while enhancing safety during operation.

Maintenance is simplified with the Ryobi 875R, as it features an easy-access air filter and fuel cap that facilitate routine checks and refills. This ensures that users can dedicate their time to trimming rather than struggling with upkeep.

In summary, the Ryobi 875R stands out in the market for its powerful engine, ergonomic design, dual-string head technology, and durability. Whether tackling overgrown lawns or maintaining garden borders, this string trimmer delivers the performance and ease of use that both novices and seasoned landscapers appreciate.
Top Page Image Contents