Ryobi RY39500 manual Filling Tank, Starting and Stopping

Page 9

OPERATION

name “Gasohol.” Do not use E85 fuel.

MTBE (methyl tertiary butyl ether) 15% by volume. You may use gasoline containing up to 15% MTBE by volume. Methanol (methyl or wood alcohol) 5% by volume. You may use gasoline containing up to 5% methanol by volume as long as it also contains cosolvents and corrosion inhibi- tors to protect the fuel system. Gasoline containing more than 5% methanol by volume may cause starting and/or performance problems. It may also damage metal, rubber, and plastic parts of the product or your fuel system.

If you notice any undesirable operating symptoms, try another service station or switch to another brand of gasoline. NOTE: Fuel system damage or performance problems result- ing from the use of an oxygenated fuel containing more than the percentages of oxygenates stated previously are not covered under warranty.

FILLING TANK

Position the hedge trimmer on its side with the fuel cap pointing upward.

Clean surface around fuel cap to prevent contamination.

Loosen fuel cap slowly. Rest the cap on a clean surface.

Carefully pour fuel into the tank. Avoid spillage.

Immediately replace fuel cap and hand tighten. Wipe up any fuel spillage.

NOTE: It is normal for smoke to be emitted from a new engine after first use.

WARNING:

Always shut off engine before fueling. Never add fuel to a machine with a running or hot engine. Move at least 30 ft. from refueling site before starting engine. Do not smoke!

Failure to heed this warning could result in serious per- sonal injury.

STARTING AND STOPPING

See Figures 2 - 4.

To start a cold engine:

The starting method differs depending on whether the engine is cold or warm.

Place the hedge trimmer on level ground and ensure that no objects or obstructions are in the immediate vicinity that could come in contact with the blades.

Hold the front handle firmly with your left hand and put your right foot onto the base of the rear handle.

n PRIME - Press the primer bulb 7 times.

n SET the start lever to the START position. n PULL the rope until the engine starts.

n Allow the engine to run for 6-10 seconds.

n Squeeze throttle trigger lock and throttle trigger. NOTE:  Squeezing and releasing the throttle trigger releases the start lever to the RUN position.

To start a warm engine:

PULL the rope until the engine starts.

Fig. 2

START

RUN

Fig. 3

on/off switch

TRIGGER

lock

THROTTLE

 

TRIGGER

Fig. 4

 

To stop the engine:

Press and hold the on/off switch in the stop “  ” position until the engine stops.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents All versions Save this Manual for Future ReferenceIntroduction Table of ContentsRead all instructions General Safety RulesSpecific Safety Rules Symbol Name Explanation SymbolsSymbol Signal Meaning ServiceProduct Specifications FeaturesGuard Rotating HandleOperation AssemblyStarting and Stopping Filling TankOperating the Hedge Trimmer Cutting TipsTo rotate handle Rotating handle KnobMaintenance General MaintenanceReplacing Blades Cleaning the AIR Filter Screen Cleaning the Hedge TrimmerLubricating the Blade Fuel CAPSpark Plug replacement Idle Speed AdjustmentCleaning the Exhaust Port and Muffler Spark ArrestorProblem Possible Cause Remedy TroubleshootingLimited Warranty Statement WarrantyMANUFACTURER’S Warranty Coverage Includes This product was manufactured with a catalyst mufflerCalifornia Proposition Parts and Service

RY39500 specifications

The Ryobi RY39500 is a powerful and efficient pressure washer designed for both residential and light commercial use. With its compact design and robust performance, it is an ideal choice for those looking to tackle various cleaning tasks around their home or business.

One of the standout features of the RY39500 is its 2,300 PSI and 1.2 GPM (gallons per minute) output. This impressive power allows it to easily remove stubborn dirt, grime, and stains from surfaces such as patios, decks, driveways, and siding. The pressure washer is equipped with a reliable 13-amp electric motor that ensures consistent performance and minimizes the hassle of gas maintenance.

The RY39500 comes with a range of nozzles, including the 0° and 25° nozzles, which provide versatility for various cleaning applications. The quick-connect nozzle system makes it easy to switch between nozzles without the need for additional tools, allowing users to select the right pressure for the job at hand. Additionally, it features a built-in detergent tank that simplifies the process of applying soap to surfaces, further enhancing cleaning efficiency.

Another key characteristic of the Ryobi RY39500 is its user-friendly design. The unit is equipped with large wheels and a lightweight frame, making it easy to maneuver around different areas while cleaning. The onboard storage compartment provides a convenient space for storing accessories, ensuring everything is organized and readily accessible.

For added safety and convenience, the RY39500 includes an automatic shut-off feature. This technology automatically turns off the motor when the trigger is not engaged, reducing water waste and prolonging the life of the pressure washer. Safety features, such as a safety lock on the trigger, provide additional peace of mind during operation.

In terms of durability, the Ryobi RY39500 is built to withstand the rigors of regular use. The high-quality components contribute to its longevity, making it a solid investment for homeowners and small businesses alike.

Overall, the Ryobi RY39500 combines powerful performance with user-friendly features, making it an excellent choice for anyone needing an efficient and reliable pressure washer. Its versatility, ease of use, and safety features set it apart in the competitive market, making it a favored option for diverse cleaning needs.
Top Page Image Contents