Ryobi RY39500 manual Troubleshooting, Problem Possible Cause Remedy

Page 14

troubleshooting

Problem

possible Cause

Remedy

Engine will not start.

No spark.

 

Clean or replace spark plug. Reset spark plug gap. Refer to Spark

 

 

 

Plug Replacement earlier in this manual.

 

No fuel.

 

Push primer bulb until bulb is full of fuel. If bulb does not fill, primary

 

 

 

fuel delivery system is blocked. Contact a servicing dealer. If primer

 

 

 

bulb fills, engine may be flooded, proceed to next item.

 

Engine is flooded.

Pull starter three times with choke lever at “RUN”. If engine does

 

 

 

not start, move choke lever to “START” and repeat normal starting

 

 

 

procedure. If engine still fails to start, repeat procedure with a new

 

 

 

spark plug.

 

Starter rope pulls harder

Contact a servicing dealer.

 

now than when new.

 

 

 

 

Engine starts but will

Engine requires approxi-

Allow engine to completely warm up. If engine does not accelerate

not accelerate.

mately three minutes to

after three minutes, contact a servicing dealer.

 

warm up.

 

 

 

 

 

Engine starts but will

Carburetor requires

Contact a servicing dealer.

only run at high speed

adjustment­

.

 

at half choke.

 

 

 

 

 

 

Engine does not reach

Check lubricant fuel mix-

Use fresh fuel and the correct 2-cycle lubricant mix.

full speed and emits

ture.

 

Clean air filter screen. Refer to Cleaning The Air Filter Screen

excessive smoke.

 

 

Air filter screen is dirty.

earlier in this manual.

 

 

Spark arrestor screen is

Contact a servicing dealer.

 

dirty.

 

 

 

 

 

Engine starts, runs,

Idle speed screw on

Turn idle speed screw clockwise to increase idle speed. See figure

and accelerates but

carburetor­

needs adjust-

11. The blades should not move at idle.

will not idle.

ment

 

 

 

 

 

 

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Save this Manual for Future Reference All versionsTable of Contents IntroductionGeneral Safety Rules Read all instructionsSpecific Safety Rules Symbols Symbol Name ExplanationService Symbol Signal MeaningGuard FeaturesProduct Specifications Rotating HandleAssembly OperationFilling Tank Starting and StoppingTo rotate handle Cutting TipsOperating the Hedge Trimmer Rotating handle KnobReplacing Blades MaintenanceGeneral Maintenance Lubricating the Blade Cleaning the Hedge TrimmerCleaning the AIR Filter Screen Fuel CAPCleaning the Exhaust Port and Muffler Idle Speed AdjustmentSpark Plug replacement Spark ArrestorTroubleshooting Problem Possible Cause RemedyWarranty Limited Warranty StatementMANUFACTURER’S Warranty Coverage This product was manufactured with a catalyst muffler IncludesParts and Service California Proposition

RY39500 specifications

The Ryobi RY39500 is a powerful and efficient pressure washer designed for both residential and light commercial use. With its compact design and robust performance, it is an ideal choice for those looking to tackle various cleaning tasks around their home or business.

One of the standout features of the RY39500 is its 2,300 PSI and 1.2 GPM (gallons per minute) output. This impressive power allows it to easily remove stubborn dirt, grime, and stains from surfaces such as patios, decks, driveways, and siding. The pressure washer is equipped with a reliable 13-amp electric motor that ensures consistent performance and minimizes the hassle of gas maintenance.

The RY39500 comes with a range of nozzles, including the 0° and 25° nozzles, which provide versatility for various cleaning applications. The quick-connect nozzle system makes it easy to switch between nozzles without the need for additional tools, allowing users to select the right pressure for the job at hand. Additionally, it features a built-in detergent tank that simplifies the process of applying soap to surfaces, further enhancing cleaning efficiency.

Another key characteristic of the Ryobi RY39500 is its user-friendly design. The unit is equipped with large wheels and a lightweight frame, making it easy to maneuver around different areas while cleaning. The onboard storage compartment provides a convenient space for storing accessories, ensuring everything is organized and readily accessible.

For added safety and convenience, the RY39500 includes an automatic shut-off feature. This technology automatically turns off the motor when the trigger is not engaged, reducing water waste and prolonging the life of the pressure washer. Safety features, such as a safety lock on the trigger, provide additional peace of mind during operation.

In terms of durability, the Ryobi RY39500 is built to withstand the rigors of regular use. The high-quality components contribute to its longevity, making it a solid investment for homeowners and small businesses alike.

Overall, the Ryobi RY39500 combines powerful performance with user-friendly features, making it an excellent choice for anyone needing an efficient and reliable pressure washer. Its versatility, ease of use, and safety features set it apart in the competitive market, making it a favored option for diverse cleaning needs.
Top Page Image Contents