Ryobi 232RD, 225RD, 227RD manual Technical data 235R

Page 31

		TECHNICAL DATA
Technical data		235R
Engine
Cylinder capacity, cm3		36,3
Cylinder bore, mm		38
Stroke length, mm		32
Idling speed, rpm		2 700
Recommended max. speed, rpm		11 000-11 700
Speed of output axle, rpm		10 000
Max. engine output, acc. to ISO 8893		1,3 kW/9 000 rpm
Catalytic converter muffler		Yes
Speed-regulated ignition system		Yes
Ignition system
Manufacturer/type of ignition system		Walbro CD
Spark plug		Champion RCJ 7Y
Electrode gap, mm		0,5
Fuel lubrication system
Manufacturer/type of carburettor		Walbro WT
Fuel tank capacity, litres		0,5
Weight
Weight without fuel, cutting tool and
guard, kg		7,3
Noise levels
Equivalent noise pressure level at the user’s
ear, measured according to EN 11806 and
ISO 7917, dB(A), min/max:		92/101
Equivalent noise power level at the user’s
ear, measured according to EN 11806 and
ISO 10884, dB(A), min/max:		105/112
Vibration levels
Vibration levels on the handles, measured
according to EN 11806 and ISO 7916,
m/s
When idling, left/right handles, min:		2,2/2,7
When idling, left/right handles, max:		2,7/4,3
At max. speed, left/right handles, min:		3,5/5,0
At max. speed, left/right handles, max:		4,5/6,2

NOTE!

Noise and vibration measurements are made with all the machine’s approved cutting equipment fitted. The table indicates the highest and lowest values.

English – 31

Image 31

Contents 101 89 225R/RD 227R/RD 232R/RD 235RSymbols Symbol ExplanationContents Throttle trigger lock Safety InstructionsMachine‘s safety equipment Personal protective equipmentQuick-release Stop switchCutting attachment guard Anti-vibration systemCutting equipment MufflerLocking nut Throttle trigger lock Vibration damping system Cutting equipment Trimmer head Cutting equipmentSharpening the clearing blade Sharpening the grass bladeTransport and storage General safety instructionsFuel safety StartGeneral working instructions Basic safety precautionsBasic clearing techniques Adjusting the harness and clearing sawDesignations Clearing‘s ABC Forestry clearing using a saw bladeWorking methods Brush cutting using a grass blade Brush cutting using the saw bladeSweeping Grass clearing using the trimmer headClearing TrimmingWhat is what on the brushcutter? What is WHAT?Transport position, handlebars AssemblyAssembling the handlebars 225R/RD, 227R/RD, 232R/RD Assembling the handlebars 235RAssembling the blade guard and grass blade Assembling the spray guard and trimmer head Trimmy SII 235R Assembling other guards and cutting equipmentAssembling Adjusting the harness and clearing sawDismantling Fuel Fuel HandlingFuelling Control before starting Start and StopStart and stop Carburettor MaintenanceCorrectly adjusted carburettor Final setting of the idling speed THigh speed needle H Cooling system MufflerTwo-part shaft Cleaning the air filterAir filter Spark plug Angle gear Daily maintenance Maintenance schedule Sharpening the clearing blade Monthly maintenance Weekly maintenanceTechnical data 225R/RD 227R/RD 232R/RD Technical DataTechnical data 235R Approved accessories 235R Type EU declaration of conformity Only applies to Europe «*2£6¬ English 1998W51 Also See