Ryobi 225L, 225LD, 227L, 227LD, 232L, 240L manual Weekly maintenance, Monthly maintenance

Page 20

MAINTENANCE

Weekly maintenance

1.Check the starter, the starter cord and the return spring.

2.Make sure that the vibration damping elements are not damaged.

3.Clean the outside of the spark plug. Remove and check the electrode gap.

Adjust the gap to 0.5 mm or change the spark plug.

4.Clean the cooling fins on the flywheel.

5.Clean or replace the muffler’s spark arrest screen (not on mufflers with a catalytic converter).

6.Clean the carburettor area.

7.Clean the cooling fins on the cylinder and check that the air intake in the starter unit is not blocked.

8.Check that the angle gear is 3/4 filled with grease. Fill if necessary using special grease.

1

2

3

4

5

6

7

8

Monthly maintenance

1.Clean the fuel tank.

2.Clean the carburettor and the area surrounding it.

3.Clean the fan and the area around it.

4.Check the fuel filter and the fuel pipe, replace if necessary.

5.Check all cables and connections.

6.Check the clutch, clutch springs and the clutch drum with regard to wear. Replace if necessary.

7.Change the spark plug.

8.Check and clean the muffler’s spark arrest screen if necessary (only mufflers with a catalytic converter).

1

2

3

4

5

6

7

8

20 – English

Image 20
Contents 225L/LD 227L/LD 232L 240L 101 89Max 10000 rpm Symbol ExplanationSymbols Contents Personal protective equipment Safety InstructionsMachine‘s safety equipment Vibration damping system MufflerCutting Equipment Locking nutMaintenance Cutting equipment Trimmer headGeneral safety instructions Fuel safetyStart Transport and storageBasic safety precautions Grass trimming using the trimmer headGeneral working instructions Basic working techniquesSweeping ClearingTrimming What is WHAT? What is what on the trimmer?Assembly Assembly of the trimmer headDismantling Assembling other guards and cutting equipmentAssembling Fuelling Fuel HandlingFuel mixture Start and stop Start and StopControl before starting Maintenance CarburettorFinal setting of the idling speed T High speed needle H Correctly adjusted carburettorMuffler Cooling system Air filterSpark plug Maintenance schedule Daily maintenanceAngle gear Two-part shaftWeekly maintenance Monthly maintenanceTechnical Data Technical data 225L/LD 227L/LD 232L240L Technical dataApproved accessories EU declaration of conformity Only applies to Europe 1998W51 Gardening Tools Direct