Chicago Electric 92115 operating instructions Shear Safety Warnings

Page 4

c. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f.Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g.Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5.Service

a.Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Shear Safety Warnings

1.Handle sheet metal with care. Sheet metal will have sharp edges. Wear ANSI-approved safety goggles, heavy- duty work gloves, long sleeve shirt, and jeans when working with sheet metal.

2.Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

3.Avoid unintentional starting. Prepare to begin work before turning on the tool.

4.Do not lay the tool down until it has come to a complete stop. Moving parts can grab the surface and pull the tool out of your control.

5.When using a handheld power tool, maintain a firm grip on the tool with both hands to resist starting torque.

6.Do not leave the tool unattended when it is plugged into an electrical outlet. Turn off the tool, and unplug it from its electrical outlet before leaving.

7.This product is not a toy. Keep it out of reach of children.

8.People with pacemakers should consult their physician(s) before use.

Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure. In addition, people with pacemakers should:

Avoid operating alone.

Do not use with trigger locked on.

Properly maintain and inspect to avoid electrical shock.

Any power cord must be properly grounded. Ground Fault Circuit Interrupter (GFCI) should also be

Page 4

For technical questions, please call 1-800-444-3353.

SKU 92115

Image 4
Contents For technical questions or replacement parts, please call Gauge Swivel Head ShearSave This Manual General Power Tool Safety WarningsSave all warnings and instructions for future reference Increased risk of electric shock if your body is grounded Shear Safety Warnings Vibration Safety Double Insulated Tools Tools with Two Prong Plugs GroundingExtension Cords Symbology 25’ 50’ 75’ 100’ 150’Unpacking SpecificationsOperating Instructions Work Piece and Work Area Set Up General Operating InstructionsMaintenance Servicing Blade MaintenanceProblem Possible Causes Likely Solutions TroubleshootingSKU For technical questions, please call Parts List Part Description QtyAssembly Diagram Limited 90 DAY Warranty