Echo 99944200615 manual Equipment, Description

Page 6

6

equipment

Before operation a complete check of the unit must be performed;

Check unit for loose/missing nuts, bolts and screws. Tighten and/or replace as needed.

Inspect shield for damage. Replace if shield is damaged or missing.

Check that the cutting attachment is firmly attached and in safe operating condition.

Check that front loop handle is adjusted for safe, comfortable operation. See Assembly Section for proper adjustment.

WARNING

Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all

openings.

ALWAYS stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit.

DO NOT start or operate unit unless all guards and protective covers are properly assembled to unit.

NEVER reach into any opening while the engine is running. Moving parts may not be visible through openings.

Description

Locate this safety decal on your attachment. Make sure the decal is legible and that you understand and follow the instructions on it. If it cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING

instructions for specific information.

1

2

P/N X505005920

4

3

Image 6
Contents PAS Rapid LoaderTM Curved Shaft Grass Trimmer Attachment Introduction Safety manualTable of Contents Operators manualSafety Manual safety symbols and important information International symbolsPersonal condition and safety equipment Physical ConditionRepetitive Stress Injuries Equipment DescriptionContents Assembly Plastic shield installationNylon line head installation/removal Power head shaft/attachment lower shaft assembly Operation MaintenanceMaintenance intervals Skill levelsNylon line replacement LubricationSpecifications StoragePage Page Page Servicing Information parts/serial number ServiceWarranty registration Additional or replacement manuals Echo consumer product support