99944200465 | OPERATION |
|
|
OPERATION
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a completestop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service.
Operation Techniques
Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas. Breathing CO can cause unconsciousness, serious injury, or death. Exhaust can cause serious burns. ALWAYS position unit so that exhaust is directed away from your face and body.
Before operating unit, be sure to read and understand the entire Operator’s Manual to avoid the chance of serious personal injury.
Note: For best results, use BRD redefining blade (provided with unit) ONLY for redefining existing bed edges. For edging next to curbs, sidewalks, or other hard surfaces, remove redefining blade and install ECHO Approved Premium Power Edger blade. Use of redefining blade next to hard surfaces, can lead to premature blade wear.
1.Always grip throttle handle with right hand, and support handle with left hand.
2.Before using Redefiner, check the area and remove objects that could be thrown.
3.Carefully plan your direction of travel. Walk outside of bed. Be aware of curbs or other obstacles.
4.Work with body turned toward engine as shown. Travel in direction of arrow, pulling rather than pushing unit. Carefully watch bed edge and direction of travel. Do NOT walk backwards.
For more information scan this QR code.
Do not walk towards gear case while operating unit with redefining blade installed, otherwise poor performance or damage to unit could occur.
X7702096504 | 13 |
© 3/2015 ECHO Inc.