Echo 99944200465 Equipment, Read the Manuals, Clear the Work Area, Keep a Firm Grip, Safety

Page 8
Read the Manuals

SAFETY

99944200465

 

 

 

 

 

 

Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death.

Read the Manuals

Provide all users of this equipment with the Operator’s Manual and Safety Manual for instructions on Safe Operation.

Clear the Work Area

Spectators and fellow workers must be warned, and children and animals prevented from coming nearer than 15 m (50 ft.) while the unit is in use.

Keep a Firm Grip

• Hold the throttle and support handles with both hands, with thumbs and fingers encircling the handles.

Keep a Solid Stance

Maintain footing and balance at all times. Do not stand on slippery, uneven or unstable surfaces. Do not work in odd positions or on ladders. Do not over reach.

Avoid Hot Surfaces

During operation, the drive shaft housing and attachment bearing housing may become very hot, too hot to touch. Avoid

contact during and immediately after operation.

Equipment

Use this attachment with ECHO approved models only. Serious injury may result from the use of this attachment combined with a non approved ECHO product.

Check unit for loose/missing nuts, bolts, and screws. Tighten and/or replace as needed.

Inspect shield for damage and that shield is securely in place. Replace if sjield is damaged or missing.

Check that the cutting attachment is firmly attached and in safe operating condition.

Note: ECHO, INC. will not be responsible for the failure of cutting devices, attachments or accessories which have not been tested and approved by ECHO.

Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings.

ALWAYS stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit.

DO NOT start or operate unit unless all guards and protective covers are properly assembled to unit.

NEVER reach into any opening while the engine is running. Moving parts may not be visible through openings.

8

X7702096504

© 3/2015 ECHO Inc.

Image 8
Contents Operator’s Manual 99944200465Bed Redefiner Attachment Models Used On: PAS-28099944200465 TABLE OF CONTENTSTABLE OF CONTENTS The Safety Manual ServiceINTRODUCTION SERVICING INFORMATIONSAFETY SAFETYAdditional or Replacement Manuals Manual Safety Symbols and Important InformationInternational Symbols Personal Condition and Safety EquipmentPhysical Condition Eye ProtectionHand Protection Hearing/Ear ProtectionBreathing Protection Proper ClothingSAFETY Repetitive Stress Injuries RSIEquipment Read the ManualsClear the Work Area Keep a Firm GripDESCRIPTION DESCRIPTIONCONTENTS CONTENTSASSEMBLY ASSEMBLYPower Head Shaft/Lower Shaft Assembly ASSEMBLY Edger Blade InstallationOperation Techniques OPERATIONOPERATION Edging Operation 6.Hold edger as shown MAINTENANCE MAINTENANCEMaintenance Intervals Skill LevelsBlade Replacement/Lubrication 8.Install inner blade adapter B onto PTO shaft C STORAGE Storage Hook InstallationSTORAGE SPECIFICATIONS SPECIFICATIONSMODEL 99944200465WARRANTY STATEMENTS WARRANTY STATEMENTSWARRANTY STATEMENTS ATTENTION TWO-STROKEENGINE POWER PRODUCT OWNERSTHIS WARRANTY DOES NOT COVER DAMAGE CAUSED BY 99922201032 11/18/2011PRODUCT REGISTRATION Thank you for choosing ECHO Power EquipmentPRODUCT REGISTRATION NOTES NOTESNOTES 99944200465X7702096504 3/2015 ECHO IncNOTES 99944200465X7702096504 3/2015 ECHO IncNOTES ECHO, INCORPORATED 400 Oakwood RoadLake Zurich, IL S89200001001/S89200999999