Echo HCA-266 specifications Starting Warm Engine, Recoil Starter

Page 19

HCA-266

OPERATION

 

 

4.Recoil Starter

Lay the unit on a flat area and keep movable attachment parts clear of all obstacles. Firmly grasp throttle handle and throttle trigger lockout with left hand and fully depress throttle trigger to wide open position. Rapidly pull recoil starter handle/rope

(D) until engine fires (or maximum five [5] pulls).

5.Choke

After engine fires (or 5 pulls), move choke (B) to the RUN

( ) (open) position. Firmly grasp throttle handle and throttle D trigger lockout with left hand and fully depress throttle trigger

to wide open position. Pull starter handle/rope until engine

starts and runs. Release throttle trigger and allow unit to warm up at idle for several minutes.

Note: If engine does not start with choke in “RUN” position after 5 pulls, repeat instructions 2 - 5.

The blades must not move at idle, otherwise serious personal injury may result. Periodic carburetor adjustment may be necessary to assure blades do not move at idle. If blades move, readjust carburetor according to “Carburetor Adjustment” instructions in this manual or see your ECHO Dealer.

6.Throttle Trigger

After engine warm-up, grip throttle handle and support handle. Depress the throttle trigger lockout, and gradually depress throttle trigger to increase engine RPM to operating speed.

Starting Warm Engine

The starting procedure is the same as Cold Start except DO NOT close the choke, and do not depress throttle trigger to wide open position.

The blades must not move at idle, otherwise serious personal injury may result. Periodic carburetor adjustment may be necessary to assure blades do not move at idle. If blades move, readjust carburetor according to “Carburetor Adjustment” instructions in this manual or see your ECHO Dealer.

1.Stop Switch

Move stop switch (A) away from the STOP position.

2.Purge Bulb

Pump purge bulb (C) until fuel is visible and flows freely in the clear fuel tank return line. Pump bulb an additional 4 or 5 times.

A

B

C

D

X7502026406

19

© 10/2014 ECHO Inc.

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Burn Hazard Operator’s ManualTable of Contents Servicing Information IntroductionAdditional or Replacement Manuals SafetyManual Safety Symbols and Important Information Mixture International SymbolsPersonal Condition and Safety Equipment Extended Operation / Extreme Conditions SafetyKeep a Firm Grip Repetitive Stress Injuries RSIRead the Manuals Clear the Work AreaAvoid Hot Surfaces Cutting Angle AdjustmentsAvoid Contact With Gear Box Assembly During Use EquipmentEPA 2010 and Later and/or C.A.R.B. Tier Emission Control Exhaust / EvaporativeProduct Emission Durability Emission Compliance Period Description Description Contents Operation AssemblyGear Housing Assembly / Drive Shaft Balance and Adjust UnitFuel Requirements FuelHandling Fuel Mixing Instructions Adjusting Cutting AngleRotate Cutter Assembly Purge Bulb Starting Cold EngineRecoil Starter Starting Warm EngineHedge Trimming Stopping EngineOperation Maintenance Intervals MaintenanceSkill Levels Fuel Filter Air FilterCooling System Spark PlugSpark Arrestor Screen Exhaust SystemHigh Altitude Operation Carburetor AdjustmentExhaust Port Cleaning Engine Break-InBlades LubricationGear Case Drive Shaft Assembly Sharpening Level BladesAdjustment Level Engine Problem Troubleshooting Chart TroubleshootingLong Term Storage Over 30 Days StorageModel SpecificationsExceptions Warranty99922201032 11/18/2011 HCA-266 Product Registration Thank you for choosing Echo Power EquipmentHCA-266 HCA-266 T43011001001/T43011999999 T43112001001/T43112999999

HCA-266 specifications

The Echo HCA-266 is a versatile and powerful handheld brush cutter that has become a favorite among both professionals and homeowners looking for a reliable landscaping tool. Known for its robust design and advanced features, the HCA-266 is tailored to tackle tough vegetation and overgrown areas with ease.

One of the standout features of the HCA-266 is its 25.4cc 2-stroke engine, which delivers impressive power while ensuring efficient fuel consumption. This engine is designed to provide excellent performance across various terrains, making it suitable for everything from light trimming to heavy-duty brush cutting. The ergonomic design of the handle ensures user comfort during extended periods of operation, reducing fatigue and enhancing control.

The Echo HCA-266 incorporates a unique double-sided blade system that allows for fast and efficient cutting in both directions. This not only improves productivity but also reduces the time spent on maintenance, as users can easily access the blades for quick cleaning and sharpening. Additionally, the adjustable angle of the cutter head provides greater flexibility, enabling users to reach difficult spots without straining.

Another significant technological aspect of the HCA-266 is its vibration-dampening system, which minimizes the impact of vibrations on the user's hands and arms. This feature contributes to a more comfortable experience, especially during long work sessions, and helps reduce the risk of fatigue-related injuries. Furthermore, the lightweight design of the tool enhances maneuverability, making it easier to navigate tight spaces.

The HCA-266 is also equipped with a simplified starting system, which allows for easy ignition with minimal effort. This feature proves valuable for users who may not be experienced with starting handheld equipment, ensuring quick readiness for any task.

In terms of durability, the Echo HCA-266 is built to withstand the rigors of outdoor use. Its housing is made of high-quality materials designed to resist impacts and harsh weather conditions, ensuring longevity and reliability. The maintenance-friendly design further extends the lifespan of the tool, enabling users to perform routine checks with ease.

In conclusion, the Echo HCA-266 stands out as a potent handheld brush cutter, combining advanced technology, user-friendly features, and robust construction. Whether for professional landscaping or personal yard work, this tool offers reliability and efficiency, making it a valuable addition to any outdoor equipment arsenal. Its impressive performance and thoughtful design cater to the needs of users, ensuring a satisfying cutting experience.
Top Page Image Contents