Echo HCA-266 specifications Spark Plug, Cooling System

Page 24

MAINTENANCE

HCA-266

 

 

Note: Federal EPA regulations require all model year 2012 and later gasoline powered engines produced for sale in the United States to be equipped with a special low permeation fuel supply hose between the carburetor and fuel tank. When servicing model year 2012 and later equipment, only fuel supply hoses certified by EPA can be used to replace the original equipment supply hose. Fines up to $37,500 may be enforced for using an un-certified replacement part.

Spark Plug

Level 2

Parts Required: REPOWERTM Tune-Up Kit

Use only NGK BPM-8Y spark plug (BPMR-8Y in Canada) otherwise severe engine damage may occur.

1.Remove spark plug and check for fouling, worn and rounded center electrode.

.65 mm (.026 in.)

2.Clean the plug or replace with a new one. DO NOT sand blast to clean. Remaining sand will damage engine.

3.Adjust spark plug gap by bending outer electrode.

4.Tighten spark plug to 150–170 kgf • cm (130–150 in • lbf).

Cooling System

Level 2

Parts Required: None if you are careful.

To maintain proper engine operating temperatures, cooling air must pass freely through the cylinder fin area. This flow of air carries combustion heat away from the engine.

Overheating and engine seizure can occur when:

• Air intakes are blocked, preventing cooling air from reaching the cylinder.

•Dust and grass build up on the outside of the cylinder. This build up insulates the engine and prevents the heat from leaving.

Removal of cooling passage blockages or cleaning of cooling fins is considered “Normal Maintenance.” Any failure attributed to lack of maintenance is not warranted.

24

X7502026406

© 10/2014 ECHO Inc.

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Operator’s Manual Burn HazardTable of Contents Introduction Servicing InformationSafety Additional or Replacement ManualsManual Safety Symbols and Important Information International Symbols MixturePersonal Condition and Safety Equipment Safety Extended Operation / Extreme ConditionsRepetitive Stress Injuries RSI Read the ManualsClear the Work Area Keep a Firm GripCutting Angle Adjustments Avoid Contact With Gear Box Assembly During UseEquipment Avoid Hot SurfacesEmission Control Exhaust / Evaporative EPA 2010 and Later and/or C.A.R.B. TierProduct Emission Durability Emission Compliance Period Description Description Contents Assembly Gear Housing Assembly / Drive ShaftBalance and Adjust Unit OperationFuel Fuel RequirementsHandling Fuel Adjusting Cutting Angle Mixing InstructionsRotate Cutter Assembly Starting Cold Engine Purge BulbStarting Warm Engine Recoil StarterStopping Engine Hedge TrimmingOperation Maintenance Maintenance IntervalsSkill Levels Air Filter Fuel FilterSpark Plug Cooling SystemExhaust System Spark Arrestor ScreenCarburetor Adjustment Exhaust Port CleaningEngine Break-In High Altitude OperationLubrication BladesGear Case Drive Shaft Assembly Blades Sharpening LevelAdjustment Level Troubleshooting Engine Problem Troubleshooting ChartStorage Long Term Storage Over 30 DaysSpecifications ModelWarranty Exceptions99922201032 11/18/2011 HCA-266 Thank you for choosing Echo Power Equipment Product RegistrationHCA-266 HCA-266 T43011001001/T43011999999 T43112001001/T43112999999

HCA-266 specifications

The Echo HCA-266 is a versatile and powerful handheld brush cutter that has become a favorite among both professionals and homeowners looking for a reliable landscaping tool. Known for its robust design and advanced features, the HCA-266 is tailored to tackle tough vegetation and overgrown areas with ease.

One of the standout features of the HCA-266 is its 25.4cc 2-stroke engine, which delivers impressive power while ensuring efficient fuel consumption. This engine is designed to provide excellent performance across various terrains, making it suitable for everything from light trimming to heavy-duty brush cutting. The ergonomic design of the handle ensures user comfort during extended periods of operation, reducing fatigue and enhancing control.

The Echo HCA-266 incorporates a unique double-sided blade system that allows for fast and efficient cutting in both directions. This not only improves productivity but also reduces the time spent on maintenance, as users can easily access the blades for quick cleaning and sharpening. Additionally, the adjustable angle of the cutter head provides greater flexibility, enabling users to reach difficult spots without straining.

Another significant technological aspect of the HCA-266 is its vibration-dampening system, which minimizes the impact of vibrations on the user's hands and arms. This feature contributes to a more comfortable experience, especially during long work sessions, and helps reduce the risk of fatigue-related injuries. Furthermore, the lightweight design of the tool enhances maneuverability, making it easier to navigate tight spaces.

The HCA-266 is also equipped with a simplified starting system, which allows for easy ignition with minimal effort. This feature proves valuable for users who may not be experienced with starting handheld equipment, ensuring quick readiness for any task.

In terms of durability, the Echo HCA-266 is built to withstand the rigors of outdoor use. Its housing is made of high-quality materials designed to resist impacts and harsh weather conditions, ensuring longevity and reliability. The maintenance-friendly design further extends the lifespan of the tool, enabling users to perform routine checks with ease.

In conclusion, the Echo HCA-266 stands out as a potent handheld brush cutter, combining advanced technology, user-friendly features, and robust construction. Whether for professional landscaping or personal yard work, this tool offers reliability and efficiency, making it a valuable addition to any outdoor equipment arsenal. Its impressive performance and thoughtful design cater to the needs of users, ensuring a satisfying cutting experience.
Top Page Image Contents