Echo HC-155 specifications Carburetor Adjustment, Engine Break-In, High Altitude Operation

Page 24

MAINTENANCE

HC-155

 

 

4.Inspect heat shield, and replace if damaged.

5.Install heat shield, muffler, and eyeplate.

6.Tighten muffler mounting bolts (or nuts) to 80-95 in•lbf (90-110 kgf•cm).

7.Install muffler cover and attach spark plug lead.

8.Start engine, and warm to operating temperature.

9.Stop engine, and re-tighten mounting bolts (or nuts) to specifications.

Carburetor Adjustment

The blades must not move at idle, otherwise serious personal injury may result. Periodic carburetor adjustment may be necessary to assure blades do not move at idle.

If blades move, readjust carburetor according to these instructions, or see your ECHO Dealer.

Engine Break-In

New engines must be operated a minimum duration of two tanks of fuel break-in before carburetor adjustments can be made. During the break-in period your engine performance will increase and exhaust emissions will stabilize. Idle speed can be adjusted as required.

High Altitude Operation

This engine has been factory adjusted to maintain satisfactory starting, emission, and durability performance up to 1,100 feet above sea level (ASL) (96.0 kPa). To maintain proper engine operation and emission compliance above 1,100 feet ASL the carburetor may need to be adjusted by an authorized ECHO service dealer.

If the engine is adjusted for operation above 1,100 feet ASL, the carburetor must be re-adjusted when operating the engine below 1,100 feet ASL, otherwise severe engine damage may result.

Level 2.

Parts Required: None

Note: Every unit is run at the factory and the carburetor is set in compliance with emission regulations. Carburetor adjustments, other than idle speed, must be performed by an authorized ECHO dealer.

1.Check idle speed and reset if necessary. If a tachometer is available, idle speed screw (A) should be set to the specifications found on “Specifications” page of this manual. Turn idle screw (A) clockwise to increase idle speed; counter clockwise to decrease idle speed.

When carburetor adjustment is completed, the cutting attachment should not move at idle, otherwise serious personal injury may result.

A

24

X7502256706

© 9/2013 ECHO Inc.

Image 24
Contents Operator’s Manual Table of Contents Introduction Servicing InformationSafety Additional or Replacement ManualsManual Safety Symbols and Important Information International Symbols MixturePersonal Condition and Safety Equipment Vibration and Cold Repetitive Stress InjuriesEquipment Emission Control Exhaust / Evaporative EPA 2010 and Later and/or C.A.R.B. TierProduct Emission Durability Emission Compliance Period Description Description Contents Assembly Remove Blade GuardInstall Blade Guard OperationFuel Fuel RequirementsHandling Fuel Starting Cold Engine Mixing InstructionsStarting Warm Engine Purge BulbStopping Engine Hedge Trimming Maintenance Maintenance IntervalsSkill Levels Air Filter Fuel FilterSpark Plug Cooling SystemExhaust Port Cleaning Exhaust SystemSpark Arrestor Screen Carburetor Adjustment Engine Break-InHigh Altitude Operation Lubrication BladesGear Box Blades Sharpening LevelAdjustment Level Troubleshooting Engine Problem Troubleshooting ChartStorage Long Term Storage Over 30 DaysSpecifications ModelWarranty Statements OWNER’S ResponsibilityWarranty Statements HC-155 HC-155 HC-155 S68011001001/S68011999999 S76212001001/S76212999999

HC-155 specifications

The Echo HC-155 is a cutting-edge handheld communication device designed for professionals who require reliable and efficient communication in demanding environments. This portable radio showcases advanced technology that meets the rigorous demands of various industries, including construction, security, and emergency services.

One of the standout features of the Echo HC-155 is its robust communication range. With a maximum reach of up to 10 miles in ideal conditions, users can stay connected over considerable distances. This is particularly beneficial in expansive job sites or emergency situations where quick and clear communication can be vital. The device operates on both VHF and UHF frequencies, providing flexibility and compatibility with existing systems.

Another key characteristic of the HC-155 is its durability. The device is designed to withstand harsh environments, featuring an IP67 rating that ensures water and dust resistance. This rugged design means that it can operate effectively in inclement weather and challenging working conditions, making it a reliable choice for outdoor professionals.

The Echo HC-155 is equipped with advanced digital signal processing technology that enhances audio quality. Users benefit from clear and crisp sound, reducing misunderstandings during critical conversations. Furthermore, the device includes features like noise-canceling capabilities to filter out background disruptions, ensuring that communication remains effective even in loud environments.

For ease of use, the HC-155 incorporates an intuitive interface, with large buttons and a bright LCD screen that displays crucial information such as battery life, signal strength, and channel selection. This user-friendly design makes it accessible for professionals of all experience levels, allowing for quick operation during high-pressure situations.

Battery life is another significant consideration, and the Echo HC-155 excels in this area as well. With a long-lasting battery capable of enduring extended use, users can rely on the device throughout their busy work schedules without the constant need for recharging.

In summary, the Echo HC-155 is a versatile and efficient communication tool built for the modern professional. Its impressive range, durability, superior audio quality, user-friendly interface, and reliable battery life make it an invaluable asset in critical situations where clear and effective communication is paramount. Whether in construction, security, or emergency response, the HC-155 stands out as a dependable choice for those who demand excellence in handheld communication technology.