Echo HC-155 Emission Control Exhaust / Evaporative, EPA 2010 and Later and/or C.A.R.B. Tier

Page 9

HC-155

EMISSION CONTROL (EXHAUST / EVAPORATIVE)

 

 

•Check unit for loose/missing nuts, bolts, and screws. Tighten and/or replace as needed.

•Check that the cutting attachment is firmly attached and in safe operating condition. Dull, loose or damaged blades should not be used.

Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings.

•ALWAYS stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit.

•DO NOT start or operate unit unless all guards and protective covers are properly assembled to unit.

•NEVER reach into any opening while the engine is running. Moving parts may not be visible through openings.

Check fuel system for leaks due to fuel tank damage, especially if the unit is dropped. If damage or leaks are found, do not use unit, otherwise serious personal injury or property damage may occur. Have unit repaired by an authorized servicing dealer before using.

EMISSION CONTROL (EXHAUST / EVAPORATIVE)

EPA 2010 and Later and/or C.A.R.B. TIER III

The emission control system for the engine is EM (engine modification) and, if the second to last character of the Engine Family on the Emission Control Information label (sample below) is “C”, “K”, or “T”, the emission control system is EM and TWC (3-way catalyst). The fuel tank/fuel line emission control system is EVAP (evaporative emissions). Evaporative emissions for California models are only applicable to fuel tanks.

An Emission Control Label is located on the engine. (This is an

EXAMPLE ONLY, information on label varies by engine FAMILY).

Product Emission Durability (Emission Compliance Period)

The 50 or 300 hour emission compliance period is the time span selected by the manufacturer certifying the engine emissions output meets applicable emissions regulations, provided that approved

maintenance procedures are followed as listed in the Maintenance Section of this manual.

X7502256706

9

© 9/2013 ECHO Inc.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Operator’s Manual Table of Contents Servicing Information IntroductionSafety Additional or Replacement ManualsManual Safety Symbols and Important Information Mixture International SymbolsPersonal Condition and Safety Equipment Repetitive Stress Injuries Vibration and ColdEquipment Emission Control Exhaust / Evaporative EPA 2010 and Later and/or C.A.R.B. TierProduct Emission Durability Emission Compliance Period Description Description Contents Remove Blade Guard AssemblyOperation Install Blade GuardFuel Fuel RequirementsHandling Fuel Mixing Instructions Starting Cold EnginePurge Bulb Starting Warm EngineStopping Engine Hedge Trimming Maintenance Maintenance IntervalsSkill Levels Fuel Filter Air FilterCooling System Spark PlugExhaust Port Cleaning Exhaust SystemSpark Arrestor Screen Carburetor Adjustment Engine Break-InHigh Altitude Operation Lubrication BladesGear Box Sharpening Level BladesAdjustment Level Engine Problem Troubleshooting Chart TroubleshootingLong Term Storage Over 30 Days StorageModel SpecificationsOWNER’S Responsibility Warranty StatementsWarranty Statements HC-155 HC-155 HC-155 S68011001001/S68011999999 S76212001001/S76212999999

HC-155 specifications

The Echo HC-155 is a cutting-edge handheld communication device designed for professionals who require reliable and efficient communication in demanding environments. This portable radio showcases advanced technology that meets the rigorous demands of various industries, including construction, security, and emergency services.

One of the standout features of the Echo HC-155 is its robust communication range. With a maximum reach of up to 10 miles in ideal conditions, users can stay connected over considerable distances. This is particularly beneficial in expansive job sites or emergency situations where quick and clear communication can be vital. The device operates on both VHF and UHF frequencies, providing flexibility and compatibility with existing systems.

Another key characteristic of the HC-155 is its durability. The device is designed to withstand harsh environments, featuring an IP67 rating that ensures water and dust resistance. This rugged design means that it can operate effectively in inclement weather and challenging working conditions, making it a reliable choice for outdoor professionals.

The Echo HC-155 is equipped with advanced digital signal processing technology that enhances audio quality. Users benefit from clear and crisp sound, reducing misunderstandings during critical conversations. Furthermore, the device includes features like noise-canceling capabilities to filter out background disruptions, ensuring that communication remains effective even in loud environments.

For ease of use, the HC-155 incorporates an intuitive interface, with large buttons and a bright LCD screen that displays crucial information such as battery life, signal strength, and channel selection. This user-friendly design makes it accessible for professionals of all experience levels, allowing for quick operation during high-pressure situations.

Battery life is another significant consideration, and the Echo HC-155 excels in this area as well. With a long-lasting battery capable of enduring extended use, users can rely on the device throughout their busy work schedules without the constant need for recharging.

In summary, the Echo HC-155 is a versatile and efficient communication tool built for the modern professional. Its impressive range, durability, superior audio quality, user-friendly interface, and reliable battery life make it an invaluable asset in critical situations where clear and effective communication is paramount. Whether in construction, security, or emergency response, the HC-155 stands out as a dependable choice for those who demand excellence in handheld communication technology.
Top Page Image Contents