Echo SHC-265 manual 01/2010

Page 31

Shaft Hedge Clipper 31

Operator's Manual

ECHO INCORPORATED EMISSION CONTROL WARRANTY STATEMENT

FOR ECHO AND SHINDAIWA BRANDS

The Environmental Protection Agency (EPA) and the California Air Resources Board (C.A.R.B.) and ECHO Incorporated (ECHO Inc.) are pleased to explain the emission control system warranty on your 2010 and later equipment/small off-road engine (SORE). New equipment/SORE must be designed, built and equipped to meet stringent EPA and C.A.R.B. anti-smog standards. ECHO Inc. must warrant the emission control system on your equipment/SORE for the periods of time listed below, provided there has been no abuse, neglect or improper maintenance of your equipment/ SORE. Your emission control system may include parts such as: carburetor, fuel-injection system, ignition system, catalytic converter/muffler, fuel tank, fuel feed lines, fuel cap assembly, spark plug, air filters, and other associated components. Where a warrantable condition exists, ECHO Inc will repair your equipment/SORE at no cost to you including diagnosis, parts and labor. The Emission Control System warranty is extended to the original owner including all subsequent owners.

MANUFACTURER'S WARRANTY COVERAGE:

The emission control system is warranted for 2 years or the length of the ECHO Inc. warranty, whichever is longer. If any emission-related part on your equipment is defective, the part will be repaired or replaced by ECHO Inc. or its Authorized Service Representative.

OWNER'S WARRANTY RESPONSIBILITIES:

As the equipment/SORE owner, you are responsible for the performance of the required maintenance listed in your Operator's Manual. ECHO Inc. recommends that you retain all receipts covering maintenance on your equipment/SORE however, ECHO Inc. cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance. As the equipment/SORE owner, you should be aware that ECHO Inc. may deny you warranty coverage if your equipment/SORE or a part has failed due to abuse, neglect, improper maintenance or unapproved modifications.

You are responsible for presenting your equipment/SORE to an ECHO Inc. authorized service representative as soon as a problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days. If a warrantable condition exists and there is no Authorized Dealer within 100 miles, ECHO Inc. will pay to ship the unit to the nearest authorized dealer. If you have questions regarding your warranty coverage, you should contact ECHO Inc. at 1-800-673-1558, web site WWW.ECHO-USA.COM or contact Shindaiwa at 1-877-986- 7783, web site WWW.SHINDAIWA.COM.

WHAT DOES THIS WARRANTY COVER?

ECHO Inc. warrants that your equipment/SORE was designed, built and equipped to conform with applicable EPA and C.A.R.B. emissions standards and that your equipment/SORE is free from defects in material and workmanship that would cause it to fail to conform with applicable requirements for 2 years or the length of the ECHO Inc. warranty, whichever is longer. The warranty period begins on the date the product is purchased by an end user.

HOW WILL A COVERED PART BE CORRECTED?

If there is a defect in a part covered by this warranty, any ECHO Inc. Authorized Service Dealer will correct the defect. You will not have to pay anything to have the part adjusted, repaired or replaced. This includes any labor and diagnosis for warranted repairs performed by the dealer. In addition, engine parts not expressly covered under this warranty but whose failure is a result of a failure of a covered part will be warranted.

WHAT PARTS ARE COVERED?

Any applicable emission related part not scheduled for "required maintenance" will be repaired or replaced within the warranty period. The repaired or replaced part will be warranted for the remaining ECHO Inc. warranty period.

Any warranted part that is scheduled only for regular inspection in the written instructions supplied is warranted for the warranty period stated above. Any such part repaired or replaced under warranty will be warranted for the remaining ECHO Inc. warranty period.

Any emission related part scheduled for replacement during "required maintenance" is warranted for the period of time prior to the first scheduled replacement point for that part. Any such part repaired or replaced under warranty shall be warranted for the remainder of the period prior to the first scheduled replacement point for that part.

Any manufacturer-approved replacement part may be used in the performance of any warranty maintenance or repairs on emission related parts, and must be provided without charge if the part is still under warranty.

Any replacement part that is equivalent in performance and durability may be used in non-warranty maintenance or repairs, and shall not reduce the warranty obligations of the manufacturer.

Throughout the equipment/SORE warranty period, ECHO Inc. will maintain a supply of warranted parts sufficient to meet the expected demand for such parts.

SPECIFIC EMISSION RELATED WARRANTED PARTS:

 

• Electronic Ignition System

• Spark Plug

• Catalytic Converter / Muffler Assembly

• Carburetor (complete assembly or replaceable components)

• Choke

• Fuel-Injection Assembly (or replaceable components)

• Fuel Tank

• Fuel Cap Assembly

• Air Filter

• Fuel Feed Line (and associated clamps/connectors as applicable)

WHAT IS NOT COVERED?

Any failure caused by abuse, neglect, improper maintenance, unapproved modifications, use of unapproved add-on parts/modified parts or unapproved accessories.

This Emission Control Warranty is valid only for the U.S.A., it's Territories, and Canada.

99922201033

 

01/2010

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Shaft Hedge Clipper Operators manual Safety manualTable of Contents IntroductionInternational symbols Safety Manual Safety Symbols and Important InformationHand Protection Physical ConditionProper Clothing Eye ProtectionRepetitive Stress Injuries Equipment EPA 2010 and Later and/or C.A.R.B. TierEmission Control exhaust & evaporative Description Hot Decal near muffler DriveshaftSupport Handle for Left Hand Cushioned grip for Left Hand Throttle Handle for Right Hand Cushioned grip for right handAssembly ContentsDrive shaft/power head Throttle linkage and ignition leads Operation Gear housing assembly / drive shaftFuel Handling Fuel Fuel RequirementsAfter use Shaft Hedge Clipper 13 Operators ManualPurge Bulb Starting cold engineStarting warm engine Shaft Hedge Clipper Operators ManualHedge trimming Stopping engineMaintenance intervals MaintenanceSkill levels Fuel filter Air filterLevel Cooling system Spark plugExhaust system Spark Arrestor ScreenExhaust Port Cleaning Engine Break-In Carburetor adjustmentHigh Altitude Operation Blades Gear Housing AssemblyLubrication Drive Shaft Assembly Sharpening blades Blade adjustmentInternal engine problem See your Echo dealer TroubleshootingStorage Long Term Storage over 30 daysModel SHC-265 SpecificationsExceptions Warranty Statements99922201032 12/03/09 01/2010 Echo consumer product support ServiceWarranty registration Additional or replacement manuals Servicing Information parts/serial number

SHC-265 specifications

The Echo SHC-265 is a versatile and efficient handheld hedge trimmer, designed for both professional landscapers and avid gardeners. This model stands out in the market due to its powerful performance, user-friendly features, and robust design. It is an ideal tool for trimming hedges, shrubs, and other vegetation with precision and ease.

One of the main features of the Echo SHC-265 is its high-performance 25.4 cc professional-grade two-stroke engine. This engine provides ample power while ensuring fuel efficiency, allowing users to tackle extensive hedge trimming sessions without frequent refueling. The engine's design reduces emissions, making it an environmentally friendly choice for outdoor work.

The SHC-265 is equipped with dual reciprocating blades that are hardened for added durability and longevity. These blades deliver a clean and precise cut, promoting healthy plant growth and preventing damage to the foliage. The blade length spans 24 inches, making it suitable for reaching even the most challenging areas of hedges and shrubs.

Another noteworthy feature is the ergonomic design of the SHC-265, which includes a comfortable grip and a lightweight body. This design minimizes user fatigue, making it easy to handle for extended periods. The adjustable rear handle allows for better maneuverability and control, enabling users to operate the trimmer in various positions and angles.

Safety is a priority in the design of the Echo SHC-265. It comes with a front guard that protects the user from flying debris and a blade brake system that stops the blades quickly when the trigger is released. These safety features ensure that users can operate the trimmer with confidence, minimizing the risk of accidents.

The SHC-265 also features an easy starting system, allowing users to get to work with minimal hassle. The combination of efficient fuel consumption and a reliable starting mechanism demonstrates Echo's commitment to providing tools that enhance productivity.

In summary, the Echo SHC-265 is a powerful, efficient, and user-friendly hedge trimmer perfect for a variety of landscaping tasks. With its robust engine, durable blades, ergonomic design, and safety features, it stands out as a top choice for anyone looking to maintain their gardens and landscapes effectively. Whether for professional or personal use, the SHC-265 is a reliable tool that ensures excellent results in hedge trimming.
Top Page Image Contents