Echo SRM-266T specifications Air Filter, Fuel Filter

Page 23

SRM-266T

MAINTENANCE

 

 

Air Filter

Level 1

Parts Required: REPOWERTM AIR & FUEL FILTER KIT.

1.Close choke (Cold Start Position [ ]). This prevents dirt from entering the carburetor throat when the air filter is removed. Brush accumulated dirt from air cleaner area.

2.Remove air filter cover and air filter retainer from inside cover. Brush dirt from inside cover.

3.Replace filter if it is damaged, very dirty, or the rubber sealing edges are deformed.

4.Remove foam pre-filter and air filter and clean as indicated below:

Foam Pre-filter

•Clean foam filter in water/detergent solution and rinse with clean water.

•Wrap the filter in a clean, dry cloth and squeeze (do not wring) dry. Allow to dry completely before reuse. Do not oil.

Dual Layer Air Filter

•Lightly brush debris from filter.

•Soak heavily soiled filters in water/detergent solution to loosen dirt, then brush lightly.

•Rinse with clean water and allow to dry completely before reuse.

5.Place foam pre-filter over raised center and inside outer lip of air filter. Install air filter in air filter case.

6.Install air filter retainer on post in air filter cover, flat side up.

7.Install air filter cover and tighten cover knob securely.

Fuel Filter

Level 1

Parts Required: REPOWERTM AIR & FUEL FILTER KIT.

Fuel is VERY flammable. Use extreme care when mixing, storing or handling, or serious personal injury may result.

1.Use a clean rag to remove loose dirt from around fuel cap and empty fuel tank.

2.Use a hook to pull the fuel line and filter from the tank.

3.Remove the filter from the line and install the new filter.

X7502026104

23

© 9/2014 ECHO Inc.

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Burn Hazard Operator’s ManualTable of Contents Servicing Information IntroductionManual Safety Symbols and Important Information SafetyAdditional or Replacement Manuals On / OFF International SymbolsPersonal Condition and Safety Equipment Do not Wear Open Toed Shoes Do not Operate Unit Barefooted Extended Operation / Extreme ConditionsKeep a Firm Grip Repetitive Stress Injuries RSIRead the Manuals Clear the Work AreaAvoid Hot Surfaces Emission Control Exhaust / EvaporativeEquipment EPA 2010 and Later and/or C.A.R.B. TierProduct Emission Durability Emission Compliance Period Emission Control Exhaust / EvaporativeDescription Description Contents Nylon Line Head Installation AssemblyPlastic Shield Installation Remove Nylon Line Head Support Handle InstallationOperation To Advance Trimmer LineBlade Selection Operation With BladesFuel Handling Fuel Fuel RequirementsAfter use Starting Cold EnginePurge Bulb Starting Warm EngineStopping Engine Move stop switch a to Stop positionSkill Levels MaintenanceMaintenance Intervals Fuel Filter Air FilterCooling System Spark PlugSpark Arrestor Screen Exhaust SystemHigh Altitude Operation Carburetor AdjustmentExhaust Port Cleaning Engine Break-InDrive Shaft flex cable models Gear HousingLubrication Nylon Line Replacement Nylon Line Head Disassembly InstructionsSharpening Metal Blades Engine Problem Troubleshooting Chart TroubleshootingLong Term Storage Over 30 Days StorageModel SpecificationsExceptions Warranty StatementsWarranty Statements Product Registration Thank you for choosing Echo Power EquipmentSRM-266T SRM-266T SRM-266T SRM-266T ECHO, Incorporated

SRM-266T specifications

The Echo SRM-266T is a robust and efficient string trimmer that stands out in the competitive landscape of outdoor power equipment. Engineered with both professional and residential users in mind, this trimmer delivers exceptional power along with user-friendly features.

At the heart of the SRM-266T lies a high-performance 25.4 cc engine. This two-stroke engine provides an impressive power-to-weight ratio, allowing users to tackle even the most demanding trimming tasks with ease. The engine's design also emphasizes fuel efficiency, ensuring longer run times without compromising on performance. This feature makes the Echo SRM-266T an ideal choice for those looking to maintain large lawns or commercial properties.

One of the most notable features of the SRM-266T is its ergonomic design. The string trimmer is equipped with a curved shaft that not only enhances maneuverability but also reduces operator fatigue during extended use. The lightweight construction further contributes to its ease of handling, making it suitable for users of varying levels of experience.

The SRM-266T utilizes a dual-line cutting head that allows for efficient trimming and edging. This feature is enhanced by Echo's patented Rapid-Loader system, which simplifies the process of reloading trimmer line, minimizing downtime and maximizing productivity. The trimmer accommodates .095-inch diameter line, providing a perfect balance of durability and cutting performance.

In terms of technology, the Echo SRM-266T boasts a premium quality ignition system, which enhances starting reliability and engine performance. This ignition system reduces the likelihood of stalling, allowing for smooth operation even in challenging conditions.

Durability is another characteristic that sets the SRM-266T apart. Its solid construction and high-quality materials ensure that the trimmer can withstand the rigors of frequent use. The vibration-dampening handle further enhances user comfort, making it a great choice for extended sessions.

With its combination of power, efficiency, and ergonomic design, the Echo SRM-266T is a top-tier choice for anyone in need of a reliable string trimmer. Whether for residential landscaping or professional lawn care, this model meets and exceeds expectations, making yard maintenance a more manageable and enjoyable task.
Top Page Image Contents