Echo SRM-266T specifications Lubrication, Gear Housing, Drive Shaft flex cable models

Page 27

SRM-266T

MAINTENANCE

 

 

Note: Every unit is run at the factory and the carburetor is set in compliance with emission regulations. Carburetor adjustments, other than idle speed, must be performed by an authorized ECHO dealer.

1.Check idle speed and reset if necessary. If a tachometer is available, idle speed screw (A) should be set to the specifications found on “Specifications” page of this manual. Turn idle screw (A) clockwise to increase idle speed; counterclockwise to decrease idle speed.

A

When carburetor adjustment is completed, the cutting attachment should not move at idle, otherwise serious personal injury may result.

Lubrication

Level 1.

Parts

Lithium Base Grease.

Required:

 

Gear Housing

B

 

1. Clean all loose debris from gear case.

 

C

A

 

2. Remove plug (A) and check level of grease.

3. Add grease if necessary. DO NOT over-fill.

D

Drive Shaft (flex cable models)

1.Loosen two (2) screws (B) and remove center locating screw (C). Pull gear case and shield from drive shaft housing.

2.Pull flexible cable from the drive shaft housing, wipe clean and re-coat with a thin coating [15 ml (1/2 oz.)] of grease.

3.Slide the flexible cable back in the drive housing. DO NOT get dirt on the flex cable.

4.Install the gear housing and shield assembly.

Flat edge of washers (D) must be against drive shaft.

X7502026104

27

© 9/2014 ECHO Inc.

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Burn Hazard Operator’s ManualTable of Contents Servicing Information IntroductionSafety Additional or Replacement ManualsManual Safety Symbols and Important Information On / OFF International SymbolsPersonal Condition and Safety Equipment Do not Wear Open Toed Shoes Do not Operate Unit Barefooted Extended Operation / Extreme ConditionsKeep a Firm Grip Repetitive Stress Injuries RSIRead the Manuals Clear the Work AreaAvoid Hot Surfaces Emission Control Exhaust / EvaporativeEquipment EPA 2010 and Later and/or C.A.R.B. TierProduct Emission Durability Emission Compliance Period Emission Control Exhaust / EvaporativeDescription Description Contents Assembly Plastic Shield InstallationNylon Line Head Installation Remove Nylon Line Head Support Handle InstallationOperation To Advance Trimmer LineBlade Selection Operation With BladesFuel Handling Fuel Fuel RequirementsAfter use Starting Cold EnginePurge Bulb Starting Warm EngineStopping Engine Move stop switch a to Stop positionMaintenance Maintenance IntervalsSkill Levels Fuel Filter Air FilterCooling System Spark PlugSpark Arrestor Screen Exhaust SystemHigh Altitude Operation Carburetor AdjustmentExhaust Port Cleaning Engine Break-InGear Housing LubricationDrive Shaft flex cable models Nylon Line Replacement Nylon Line Head Disassembly InstructionsSharpening Metal Blades Engine Problem Troubleshooting Chart TroubleshootingLong Term Storage Over 30 Days StorageModel SpecificationsExceptions Warranty StatementsWarranty Statements Product Registration Thank you for choosing Echo Power EquipmentSRM-266T SRM-266T SRM-266T SRM-266T ECHO, Incorporated

SRM-266T specifications

The Echo SRM-266T is a robust and efficient string trimmer that stands out in the competitive landscape of outdoor power equipment. Engineered with both professional and residential users in mind, this trimmer delivers exceptional power along with user-friendly features.

At the heart of the SRM-266T lies a high-performance 25.4 cc engine. This two-stroke engine provides an impressive power-to-weight ratio, allowing users to tackle even the most demanding trimming tasks with ease. The engine's design also emphasizes fuel efficiency, ensuring longer run times without compromising on performance. This feature makes the Echo SRM-266T an ideal choice for those looking to maintain large lawns or commercial properties.

One of the most notable features of the SRM-266T is its ergonomic design. The string trimmer is equipped with a curved shaft that not only enhances maneuverability but also reduces operator fatigue during extended use. The lightweight construction further contributes to its ease of handling, making it suitable for users of varying levels of experience.

The SRM-266T utilizes a dual-line cutting head that allows for efficient trimming and edging. This feature is enhanced by Echo's patented Rapid-Loader system, which simplifies the process of reloading trimmer line, minimizing downtime and maximizing productivity. The trimmer accommodates .095-inch diameter line, providing a perfect balance of durability and cutting performance.

In terms of technology, the Echo SRM-266T boasts a premium quality ignition system, which enhances starting reliability and engine performance. This ignition system reduces the likelihood of stalling, allowing for smooth operation even in challenging conditions.

Durability is another characteristic that sets the SRM-266T apart. Its solid construction and high-quality materials ensure that the trimmer can withstand the rigors of frequent use. The vibration-dampening handle further enhances user comfort, making it a great choice for extended sessions.

With its combination of power, efficiency, and ergonomic design, the Echo SRM-266T is a top-tier choice for anyone in need of a reliable string trimmer. Whether for residential landscaping or professional lawn care, this model meets and exceeds expectations, making yard maintenance a more manageable and enjoyable task.
Top Page Image Contents