Genesis Advanced Technologies G6.1c owner manual Connections, Adjustments

~ÄëçäìíÉ=ÑáÇÉäáíó

1.3 Connections

The speakers should be connected directly to the speaker-level output of your power amplifiers using high quality speaker cables and the 5- way binding posts.

The high-level thru-put binding posts are for connecting to a subwoofer. We recommend the Genesis ServoSub™ 4/8 as the perfect complement to this speaker.

1.4 Adjustments

Don’t be too worried by the knobs on the back of the G6.1c. Just set both knobs to the 12 o’clock position. That is a good place to start. The G6.1c will sound great, straight out of the box, set-up like this. As you play your system for the next hundred hours or so, the speaker will settle in and break in.

If you have at least 12 inches (30cm) of space between the back of the speaker and the rear wall, the rear tweeter should be left ON. Otherwise, turn the rear tweeter off with the tweeter defeat switch on the back panel.

Once you familiarize yourself with its performance, putting a little bit of additional effort into tuning the speaker properly for your system (which includes the room), will give you greater long-term enjoyment and benefits.

ver 1.0 5