Craftsman 358.79107 manual Operating Instructions, Operating Position Always USE, Ments

Page 11

REMOVING TRIMMER ATTACH-

MENT (OR OTHER OPTIONAL AT- TACHMENTS)

CAUTION: When removing or instal- ling attachments, place the unit on a flat surface for stability.

1.Loosen the coupler by turning the knob counterclockwise.

Upper Shaft

Coupler

.OOSEN

Attachment

TIGHTENKnob

2.Press and hold the locking/release button.

Locking/Release

Button

erator's manual. Using the wrong hole

could lead to serious injury or damage to the unit.

Secondary Hole

Locking/Release

Button in Primary Hole

OPERATING INSTRUCTIONS

To maximize operating efficiency, do

not run the engine for longer than 1 minute at a time at full throttle.

OPERATING POSITION

ALWAYS USE:

Hearing

 

Protection

Eye Protection

C°uF

Upper Shaft

Attachment

 

3.While securely holding the engine and upper shaft, pull the attach- ment straight out of the coupler.

INSTALLING OPTIONAL ATTACH-

MENTS

1.Remove the shaft cap from tile at- tachment (if present).

2.Position locking/release button of attachment into guide recess of coupler.

3.Push the attachment into the cou- pler until the locking/release button snaps into the primary hole.

4.Before using the unit, tighten the

knob securely by turning clock- wise.

Coupler Primary Hole

Guide Recess

Upper Locking/ Attachment

Shaft Release

Button

_WARNING:

Make sure the lock-

ing/release button is locked in the pri- mary hole and the knob is securely tightened before operating the unit. All attachments are designed to be used in the primary hole unless otherwise stated in the applicable attachment op-

Long

Pants

Heavy

Shoes

Cut from your left to your right.

dllWARNING: Always wear eye

protection and hearing protection. Never lean over the trimmer head. Rocks or

debris can ricochet or be thrown into

eyes and face and cause blindness or other serious injury.

When operating unit, stand as shown and check for the following:

•Wear eye protection, hearing protec- tion and heavy clothing.

•Hold trigger handle with right hand and assist handle with left hand.

•Hold unit so that engine is below waist level.

•Cut only from your left to your right to ensure debris is thrown away from

you. Without bending over, keep line near and parallel to the ground and not crowded into material being cut. Do not run the engine at a higher speed than necessary. The cutting line will cut efficiently when the engine is run at less than full throttle. At lower speeds, there

is less engine noise and vibration. 12

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Operators Manual Secure Hair Above Shoulder Length @OOTransporting and Storage Unit / Maintenance SafetyFuel Safety Blade rotates Line Trimmer SafetyEdger Safety Blowernacuum SafetyCultivator Safety Brushcutter SafetyPole Pruner Safety Hedge Trimmer SafetyInstalling Trimmer ATTACH- Ment Snow Thrower SafetyCarton Contents AssemblyAttaching Shield Adjusting the HandleBefore Starting Engine Knowyour TrimmerStart Lever CouplerStarting Flooded Engine Convertible TM FeatureStarting Warm Engine Your UnitMents Installing Optional AttachOperating Instructions Operating Position Always USECutting Methods Howto Stop Your UnitInspect Muffler and Spark Arresting Screen Clean AIR FilterGeneral Recommen Dations Replacing the Trimmer Head Line ReplacementReplace Spark Plug Fuel System Carburetor AdjustmentSeasonal Storage Recheck the idleCause Remedy TroubleshootingEngineother Warranty Commencement Your Warranty Rights and OBEmission Control Warranty MAINTENANCE, Replacement and Repair of Emission REAdvertencia iEsta D indebido de esta herramienta Seguridad DEL Usuario 4ADVERTENCIAManual DEL Informacion Usuariode Seguridad DEL Aparato Transporte Y Almacenamiento Seguridad DEL Aparato Y EN EL MantenimientoSeguridad CON EL Combustible Advertencia Seguridad AL RecortarSeguridad AL Cortar Bordes Seguridad AL Cortadora DE Malezas Seguridad AL Propulsor DE AIRE/ASPIRADORAPeligro Riesgo DE Oorta Seguridad AL CultivadorSeguridad AL Podadora DE Setos Ramas Contenido DE LA Caja Seguridad AL Soplador DENieve AdvertenoiaIladvertencia Instalacion DE LA ProtectorAjuste DEL Mango Remueva la Palanca DEL ArrancadorBombeador Antes DE Poner EN Marcha EL MotorPara Poner EN Marcha EL Motor AVI$OPara Detener EL Motor CON EL Motor CalienteInstalacion DEL Accesorios Opcional Arranque DE Motor AhogadoFuncion DE Craftsman Convertible AflojeMetodos DE Corte Advertencia Verifique QUE no Haya Fija Dores NI Piezas Sueltas Cronograma DE MantenimientoTarea DE Cuidado Mantenimiento Cuando Hacer Recomendaciones GeneralesFija Verifique QUE no Haya Piezas Daiiadas O GastadasInspeccione Y Limpie EL Apara To Y SUS Placas Limpie EL Filtro DEL AireAjuste AL Carburador Reemplazo DE LA Cabezal DECorte Sistema DE Combustible Estacional AlmacenajeADVERTENClA Vuelva a verifi Otros Tabla DiagnosticaFecha DEL Comienza DE LA GA SUS Derechos Y ObligacionesCubierta DE Garantia DEL FAB RECLAMACIONSicuentaustedcon manual del usuario

358.79107 specifications

The Craftsman 358.79107 is a powerful and reliable string trimmer that stands out in the realm of outdoor tools. Renowned for its durability and performance, this trimmer is engineered to handle a variety of landscaping tasks with ease. Its advanced features and solid construction make it an excellent choice for homeowners and professional landscapers alike.

One of the main features of the Craftsman 358.79107 is its robust 25cc 2-cycle engine. This powerful engine delivers plenty of torque and power, ensuring that users can tackle tough weeds and thick grass without any hassle. The engine's 2-cycle design also means that it is lightweight, enhancing maneuverability while reducing user fatigue over extended periods of use.

Equipped with a straight shaft design, the Craftsman 358.79107 allows users to reach those hard-to-access areas, such as under bushes and around fences. The straight shaft also provides better balance and control, making it easier to handle during lengthy trimming sessions. The trimmer features a dual-line feed system that allows for easy line advancement, giving users the ability to quickly reload the trimmer with minimal downtime.

The Craftsman 358.79107 incorporates the innovative EasyStart technology, which significantly reduces the effort needed to start the engine. This feature ensures that users can get to work without the frustration typically associated with starting gas-powered trimmers. The system optimizes fuel delivery and air intake, resulting in more reliable starts and smoother operation.

The ergonomic design of the Craftsman 358.79107 enhances comfort and usability, featuring an adjustable handle that allows for personalized grip settings. This adaptability means that users can find the most comfortable position for their height and preferences, reducing fatigue during longer jobs.

Another notable characteristic is the trimmer’s lightweight construction, which makes it easy to transport and maneuver around the yard or worksite. Despite being lightweight, the unit is built to last, featuring durable materials that withstand the rigors of regular use in various environments.

In summary, the Craftsman 358.79107 combines power, efficiency, and user-friendly features, making it a top choice for those in need of a dependable string trimmer. With its powerful engine, innovative technologies, and ergonomic design, it promises to deliver great performance whether you're tackling your lawn or a professional landscaping project.
Top Page Image Contents