Craftsman 172.74815 warranty Electrical Safety, Safety Rules for Cordless Trimmers

Page 4

ELECTRICAL SAFETY cont.

3.Do not abuse the cord on the charging stand. Never carry the charging stand by its power cord. Never pull the power cord to remove the charging stand from the power outlet. Damage to the cord or charging stand could occur and create an electric shock hazard. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.

The label on your tool may include the following symbols.

V

Volts

A

Amps

Hz

Hertz

W

Watts

rain

Minutes

,-,,.,

Alternating current

...................................................................

Direct current

no

No-load speed

[]

Class II construction, Double Insulated

RPM

Revolutions per minute

SPM

Strokes per minute

OPM

Orbits per minute

Z_

Indicates danger, warning or caution.

SERVICE SAFETY

It means attention! Your safety is involved.

 

1.If any part of this trimmer is missing or should break, bend, or fail in any way; or should any component fail to perform properly: SHUT OFF the power switch and remove the trimmer plug from the power source and have the missing, damaged or failed parts replaced BEFORE resuming operation.

2.Tool service should be performed at a Sears Parts and Repair Center. Service or maintenance performed by unqualified personnel could result in a risk of injury.

3.When servicing a tool, use only identical replacement parts. Follow instructions in the maintenance section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury.

SAFETY RULES FOR CORDLESS TRIMMERS

1.KNOW your cordless trimmer. Read operator's manual carefully. Learn the applications and limitations, as well as the specific potential hazards related to this tool. Following this rule will reduce the risk of electric shock, fire or serious injury.

2.CAUTION: DO NOT have the battery pack installed in the trimmer when not in use.

3.DO NOT use trimmer without adequate lighting. ALWAYS make sure that you can see what you are trimming and edging.

4.Use trimmer ONLY when grass and weeds are dry.

5.ALWAYS remove objects such as stones, sticks, and debris from the trimming/edging path that could become entangled in, or thrown by, the trimmer.

6.ALWAYS hold the trimmer by both the main rear handle and the auxiliary handle for greater control and balance. NEVER reach under the safety guard.

SAFETY RULES FOR CORDLESS TRIMMERS cont.

7.DO NOT grasp or touch the exposed cutting line when picking up or holding the trimmer.

8.DO NOT FORCE the trimmer. Do not try to cut more than what the trimmer is designed for. It will do a better job with less chance of injury when used at the rate for which it is designed.

g.KEEP the handle dry, clean and free of oil and grease. Use a clean cloth when cleaning. DO NOT use solvents, brake fluids, gasoline, or other petroleum products to clean the trimmer. They can damage plastic parts.

10.NEVER, for any reason, touch the cutting line or other moving parts during use.

11.When changing cutting line spool be careful of the line cutter on the guard. Cutter is sharp and can cause injury (see page 17, Fig. 5a)

12.KEEP guard in place and in good working order. Keep guard positioned between you and cutting line. Keep hands and feet away from cutting line.

13.ALWAYS store the trimmer indoors with battery pack removed when not in use. It should be stored in a dry place, high up or locked in a place that is out of the reach of children.

14.Cordless tools do not have to be plugged into an electrical outlet; therefore, they are always in operating condition when the battery pack is installed. Be aware of possible hazards when not using your battery operated tool or when changing accessories. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

15.Do not place battery tools or their batteries near fire or heat. This will reduce the risk of explosion and possible injury.

16.Do not crush, drop or damage battery pack. Never use a battery pack or charging stand that has been dropped or received a sharp blow. A damaged battery pack is subject to explosion. Properly dispose of a dropped or damaged battery pack immediately.

17.Batteries vent hydrogen gas and can explode in the presence of a source of ignition, such as a pilot light. To reduce the risk of personal injury, never use any cordless product in the presence of open flame. An exploded battery can propel debris and chemicals. If exposed, flush with water immediately.

18.Do not charge battery in a damp or wet location. Following this rule will reduce the risk of electric shock.

19.For best results, your battery should be charged in a location where the temperature is more than 50°F but less than 80°F. Do not store battery outside or in vehicles.

20.Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water, then neutralize with lemon juice or vinegar, if liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention. Following this rule will reduce the risk of serious personal injury.

21.ALWAYS use only the cutting line provided with your trimmer or sold by Sears. Use of any other cutting line may create a hazardous situation.

22.ALWAYS keep ventilation openings clear of debris.

Image 4
Contents Weedwacker Cordless Trimmer Symbol Meaning Personal injuryDamage Prevention and Information Messages ZWARNINGPersonal Safety Always use proper safety equipmentCharging Stand Battery Pack Operation of any trimmer can result in ForeignSafety Rules for Cordless Trimmers Electrical SafetyLabel on your tool may include the following symbols Safety Rules for Battery Charging Stand IMPORTANT WarningSafety Rules for Battery Charging Stand Disconnect charging Stand from the power supply when netADDiTiONAL Rules for Safe Operation Serious personal injuryKNOWYOURCORDLESSTRIMMERFig Know Your Cordlesstrimmer cont. FigCharging the Battery Pack and 3a Charging a HOT Battery PackOr other Outlet forEdge Guide Fig Adjustingthe Height Figs and 8a Adjusting the Cutting Angle FigAdjustingthe Auxiliary Handle a Attaching the AUXiLiARY Handle and 7a Before useTurningtrimmer on and OFF For EdgingTurning Trimmer on Automatic LiNE Feed System InstallingTo Manually Feedthe Line Fig Operating Tips Battery Pack InformationBrackets for Cordless Trimmer Making any adjustments Tool Might be dangerous and could Result in seriousDo not Nes that are not recommendedRequestingpartsandservicefor your tool Modelnumberwill befoundon the nameplateAu Canada pour service en fran£ais SU-HOGAR 100-53.937
Related manuals
Manual 16 pages 4.98 Kb

172.74815 specifications

The Craftsman 172.74815 is a versatile and reliable tool that caters to both DIY enthusiasts and seasoned professionals. Designed to provide exceptional performance, this model boasts several features and technologies that set it apart in the crowded market of power tools.

One of the main features of the Craftsman 172.74815 is its powerful motor, delivering efficient and consistent performance for a variety of tasks. The robust motor enables users to tackle tough materials with ease, whether it's cutting, drilling, or sanding. This model is particularly praised for its ability to maintain speed under load, ensuring that projects progress smoothly without frustrating interruptions.

In terms of ergonomics, the Craftsman 172.74815 is designed with user comfort in mind. The tool features a lightweight construction that reduces fatigue during extended use, allowing for more productive work sessions. Its non-slip grip provides a secure hold, enhancing control and precision as users work on their projects.

Technology plays a significant role in the effectiveness of the Craftsman 172.74815. The tool incorporates innovative features such as adjustable speed settings, allowing users to customize the tool's performance based on the specific requirements of their tasks. This level of control is essential for achieving the best results, whether for delicate work or more heavy-duty applications.

Safety is another key consideration in the Craftsman 172.74815 design. The unit includes built-in safety features such as an electronic brake that quickly stops the tool's operation, minimizing the risk of accidents. Additionally, the dust-collecting capabilities help keep the workspace clean and free from debris, creating a better working environment.

Durability is a hallmark of the Craftsman brand, and the 172.74815 is no exception. Constructed with high-quality materials, this tool is built to withstand the rigors of frequent use. The attention to detail in its design ensures longevity, making it a wise investment for those looking to expand their toolkit.

In conclusion, the Craftsman 172.74815 stands out as a reliable and efficient tool for a wide range of applications. Its powerful motor, ergonomic design, adjustable speeds, and focus on safety make it a fantastic choice for anyone in need of a dependable power tool. Whether you are a weekend warrior or a professional contractor, the Craftsman 172.74815 is designed to meet your needs and help you achieve your project goals with ease.