IMPORTANT Warning | Craftsman 172.74815 manual

SAFETY RULES FOR CORDLESS TRIMMERS cont.

23.BEFORE using the trimmer, remove any stones, sticks, debris or objects that could be entangled in or thrown by the trimmer.

24.NYLON CUTTING LINE Keep face, hands and feet clear of rotating nylon line at all times.

25.THE ROTATING LINE PERFORMS A CUTTING FUNCTION. Use care when trimming around screens and flowers and other objects that you DO NOT want damaged or cut.

26.KEEP ALL BYSTANDERS AWAY at a safe distance from the work area, especially children.

27.MAKE SURE that other persons and pets are at least 100 feet away.

Z_ iMPORTANT WARNING:

When this tool is being used as a trimmer or edger, stones and other objects can be thrown out at high speed by the line. The tool and guard are designed to help reduce the danger. However, the following special precautions should be taken.

TO REDUCE THE RISK of rebound or ricochet injury, always work away from any solid objects such as walls, steps, large stones, landscape bricks, timbers, trees, etc. Use extreme care when working close to solid objects and when necessary edge

or trim by hand.

z_ WARNING: Some dust particles created by lawn and garden tools contain chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

. Compounds in fertilizers, herbicides, pesticides, and insecticides. * Arsenic and chromium from chemically treated lumber.

Your risk from these exposures varies, depending upon how often you do this type of work. To reduce your exposure to these chemicals:

. Work in a well-ventilated area

o Work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

Z_ WARNING: NEVER reach under the trimmer (cutting line area) until

trimmer has completely stopped. The trimmer's cutting line will continue to rotate for a few seconds after it is switched off.

SAFETY RULES FOR BATTERY CHARGING STAND

,,4k WARNING: READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below may result in electric shock, fire and / or serious personal injury.

NOTE: Before using battery charging stand, read all instructions and cautionary markings in this manual, on battery charging stand, battery pack, and trimmer using battery pack, to prevent misuse of the products and possible injury

or damage.

SAFETY RULES FOR BATTERY CHARGING STAND cont.

Z_ CAUTION: USE ONLY the specifically designated battery charging stand that was supplied with this trimmer when charging the battery pack. The use of any other battery charging stand could damage the battery pack, and create a hazardous condition.

,4k CAUTION: To reduce the risk of electric shock or damage to the battery charging stand and battery pack, charge only the specifically designated battery pack that was included with this trimmer and charging stand. Charging other

types of battery packs may cause them to burst, causing personal injury and damage.

1.Do not use the battery charging stand outdoors or expose to wet or damp conditions. Water entering charging stand will increase the risk of electric shock.

2.Use of an attachment with this battery charging stand that is not recommended may result in a risk of fire, electric shock, or injury to persons.

3.Do not abuse the cord on the battery charging stand. Never carry the charging stand by its power cord. Never pull the power cord to remove the charging stand from the power outlet. Damage to the cord or charging stand could occur and create an electric shock hazard. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.

Make sure cord is located so that it will not be stepped on, tripped over, come in contact with sharp edges or moving parts, heat, oil, or otherwise subjected to damage or stress. This will reduce the risk of accidental falls, which could cause injury, and damage to the cord which could result in electric shock.

S, Keep cord and charging stand away from heat to prevent damage to housing or internal parts.

6.Do not let gasoline, oils, petroleum-based products, etc. come in contact with plastic parts. They contain chemicals which can damage, weaken or destroy plastic.

7.An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock, if an extension cord must be used, make sure: a) That pins on plug of extension cord are the same number, size and shape as those on the charging stand, b) That extension cord is properly wired and in good electrical condition, and c) That you use a proper extension cord.

ONLY use cords listed by Underwriters Laboratories (UL). Other extension cords can cause a drop in line voltage, resulting in a loss of power and overheating of charging stand. An AWG (American Wire Gauge) size of at least 14-gauge is recommended for an extension cord of 25-ft. or less in length. Use 12-gauge for an extension cord of 50-ft. Extension cordsl00=ft, or longer are not recommended.

INSPECT tool cords for damage. Do not operate charging stand with a damaged cord, which could cause shorting and electric shock. Have damaged tool cords repaired at a Sears Service Center.

Do not operate charging stand if it has received a sharp blow, been dropped, or other wise damaged in any way. Take it to an authorized serviceman for electrical check to determine if the charging stand is in good working order.

172.74815 specifications

The Craftsman 172.74815 is a versatile and reliable tool that caters to both DIY enthusiasts and seasoned professionals. Designed to provide exceptional performance, this model boasts several features and technologies that set it apart in the crowded market of power tools.

One of the main features of the Craftsman 172.74815 is its powerful motor, delivering efficient and consistent performance for a variety of tasks. The robust motor enables users to tackle tough materials with ease, whether it's cutting, drilling, or sanding. This model is particularly praised for its ability to maintain speed under load, ensuring that projects progress smoothly without frustrating interruptions.

In terms of ergonomics, the Craftsman 172.74815 is designed with user comfort in mind. The tool features a lightweight construction that reduces fatigue during extended use, allowing for more productive work sessions. Its non-slip grip provides a secure hold, enhancing control and precision as users work on their projects.

Technology plays a significant role in the effectiveness of the Craftsman 172.74815. The tool incorporates innovative features such as adjustable speed settings, allowing users to customize the tool's performance based on the specific requirements of their tasks. This level of control is essential for achieving the best results, whether for delicate work or more heavy-duty applications.

Safety is another key consideration in the Craftsman 172.74815 design. The unit includes built-in safety features such as an electronic brake that quickly stops the tool's operation, minimizing the risk of accidents. Additionally, the dust-collecting capabilities help keep the workspace clean and free from debris, creating a better working environment.

Durability is a hallmark of the Craftsman brand, and the 172.74815 is no exception. Constructed with high-quality materials, this tool is built to withstand the rigors of frequent use. The attention to detail in its design ensures longevity, making it a wise investment for those looking to expand their toolkit.

In conclusion, the Craftsman 172.74815 stands out as a reliable and efficient tool for a wide range of applications. Its powerful motor, ergonomic design, adjustable speeds, and focus on safety make it a fantastic choice for anyone in need of a dependable power tool. Whether you are a weekend warrior or a professional contractor, the Craftsman 172.74815 is designed to meet your needs and help you achieve your project goals with ease.