•Useonly0.065"(1.65mm)diame- terrecommendedtrimmerline(See.
•UsespecifiedtrimmerspoolMake. surespoolisproperlyinstalledand allpartsaresecurelyfastened.
•Useonlyrecommendedreplace- mentpartsandaccessories.
CUTTING SAFETY
•Inspect area to be cut. Remove ob-
jects (rocks, broken glass, nails, wire, string, etc.) which can be
thrown or become entangled in cut- ting head.
•Do not overreach or stand on unsta-
ble support. Keep firm footing and balance.
•Keep the cutting head below waist level. Do not raise handles above
your waist. Cutting head can come dangerously close to your body.
•Keep away from cutting head and spinning line.
•Use unit properly. Use only for trim- ming, edging, scalping, and mow- ing. Do not force unit. It will do the job better and with less risk of injury at the rate for which it was designed.
•Use only in daylight or in good artifi-
cial light.
MAINTENANCE SAFETY
_WARNING: Disconnect unit
from the power supply before perform- ing maintenance, or when changing trimmer line.
•Maintain unit according to recom- mended procedures. Keep cutting line at proper length. Follow instruc- tions for changing trimmer line.
•Have all service and maintenance not explained in this manual per- formed by a Sears Service Center to avoid creating a hazard.
•Never douse or squirt the unit with water or any other liquid. Clean unit and labels with a damp sponge. Keep handles dry, clean, and free from oil and grease.
•Keep the air vents clean and free of
debris to avoid overheating the mo- tor. Clean after each use.
TRANSPORTING AND STORAGE
•Stop the unit and disconnect the power source when not in use.
•Carry the unit with motor stopped.
•Store the unit so the line limiter Made (on underside of shield) can- not cause injury.
•Store unit indoors in a high, dry place out of the reach of children. Store unit unplugged.
•Do not hang unit so that the trigger switch is depressed.
DOUBLE INSULATION CONSTRUC-
TION
This unit is double insulated to help
protect against electric shock. Double insulation construction consists of two
separate 'layers" of electrical insula- tion instead of grounding.
Tools built with this insulation system are not intended to be grounded. No
grounding means is provided on this unit, nor should a means of grounding
be added to this unit. As a result, the extension cord used with your unit can
be plugged into any polarized 120 volt electrical outlet.
Safety precautions must be observed when operating any electrical tool. The double insulation system only provides added protection against in-
ury resulting from an internal electrical insu at on failure.
_WARNING: | All electrical repairs |
to this unit, including housing, switch, motor, etc., must be diagnosed and repaired by qualified service person- nel. Replacement parts for a double insulated appliance must be recom- mended by the manufacturer. A double insulated appliance is marked with the words "double insulation" or "double insulated." The symbol
(square within a square) [] may also be marked on the appliance. Failure
to have the unit repaired by qualified service personnel can cause the double insulation construction to be- come ineffective and result in serious
injury.