Safety Instructions, Work Area Safety | Craftsman 172.79957 specs

SAFETY INSTRUCTIONS

!WARNING: if correctly used, this electric hedge trimmer is a quick, easy to handle and efficient tool; if used improperly or without the due precautions it could become a dangerous tool. For pleasant and safe work, ALWAYS strictly comply with the safety rules that are contained in this manual.

!WARNING: BE SURE to read and understand all instructions in this manual before using this power tool. Failure to follow all instructions may result in electric shock, fire and/or serious personal injury.

!WARNING: To avoid mistakes that could cause serious injury, DO NOT plug in this tool until the following instructions have been read and understood.

WORK AREA SAFETY

1.ALWAYS avoid dangerous conditions. DO NOT use in wet or damp areas or expose to rain.

2.DO NOT operate in the presence of flammable liquids, gases, or dust. Electric tools create sparks which may ignite dust or fumes.

3.ALWAYS keep bystanders and visitors at a safe distance while operating a trimmer. NEVER allow children near the tool. Flying objects can injure anyone in the area.

4.Children MUST NOT operate this tool.

5.CHILDPROOF your tools with padlocks and master switches. Lock tools away when not in use. This trimmer is not a toy.

6.DO NOT use trimmer at night. ALWAYS make sure you have adequate lighting.

PERSONAL SAFETY

!WARNING: The operation of any trimmer can result in FOREIGN OBJECTS BEING THROWN, which can result in personal injury or property damage. ALWAYS use proper safety equipment.

!DANGER: Laceration Hazard. Keep hands away from blades. Keep both hands on handles when power is on.

BLADE WARNINGS

TO AVOID PERSONAL INJURY:

• Handle blades with care.

• Always keep one hand on the rear handle and the other hand on the auxiliary handle to prevent your hands from touching the cutting blades.

• DO NOT place your fingers or hand between the dual cutting blades or in any position on the blade bar where they could get pinched or cut.

• NEVER touch, inspect or service the blades or hedge trimmer unless the pigtail power cord is disconnected from the extension cord and power supply.

• ALWAYS wear heavy-duty rubber gloves when you are using the hedge trimmer and when inspecting the blades for damage or cleaning or lubricating them.

• DO NOT use the hedge trimmer if the cutting bar or blade assembly is damaged or bent. Have the hedge trimmer serviced at Sears Parts and Repair Service Center.

SAFETY INSTRUCTIONS cont.

PERSONAL SAFETY cont.

!DANGER: ALWAYS USE EXTREME CARE WHEN OPERATING YOUR HEDGE TRIMMER.

If the hedge trimmer blades jam or get caught on an electrical cord or wires, DO NOT TOUCH THE BLADE OR ELECTRICAL CORD OR WIRES FOR ANY REASON! THE BLADE COULD BE ELECTRICALLY “LIVE” AND CAUSE SERIOUS OR FATAL PERSONAL INJURY.

Release, drop, set-down the hedge trimmer in the safest way possible, disconnect the damaged electrical cord or wires from the power source if possible. If that is not possible, call an electrician, electrical contractor, or the power company for assistance.

Failure to heed this DANGER warning will cause serious personal injury and possible death.

1.KNOW your tool. Read the operator’s manual carefully. Learn the electric trimmer’s applications and limitations, as well as the specific potential hazards related to this tool.

2.STAY ALERT, watch what you are doing and use common sense when operating this tool.

3.DO NOT use tool while tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating this tool may result in serious personal injury.

4.DRESS properly. Wear rubber gloves and substantial rubber soled footwear when working outdoors. DO NOT operate lawn and garden tools when barefoot or wearing open sandals. Wear long pants and long sleeves to protect your legs and arms. Trimmers can pick up objects such as rocks and send them flying at fast speeds.

DO NOT wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts. Loose clothing or long hair can be caught in moving parts.

5.USE SAFETY EQUIPMENT. Always wear safety goggles or safety glasses with side shields or full face shield, proper work shoes with rubber non-slip soles, heavy-duty non-slip rubber gloves and dust mask or respirator and hearing protection. Hard hat should be used for appropriate conditions.

6.DO NOT overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

TOOL USE AND CARE SAFETY

!WARNING: BE SURE to read and understand all instructions before operating this tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.

1.DO NOT use the tool if switch does not turn it “On” or “Off”. Any tool that cannot be controlled with the switch is dangerous and must be repaired.

2.DISCONNECT the plug from the power source before making any adjustments, changing accessories or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.

3.STORE idle tools out of the reach of children and other untrained persons. Children MUST NOT operate the tool. Tools are dangerous in the hands of untrained users.

172.79957 specifications

The Craftsman 172.79957 is a versatile, high-performance tool meticulously designed for both DIY aficionados and professional craftsmen. This tool stands out in its category due to its combination of durability, ergonomic design, and innovative technology.

One of the primary features of the Craftsman 172.79957 is its robust construction. Built with high-quality materials, it guarantees long-lasting performance, making it ideal for heavy-duty applications. The tool's housing is designed to withstand harsh working conditions, ensuring that it remains operational even in demanding environments. This durability is coupled with a well-thought-out ergonomic design that offers a comfortable grip and reduces user fatigue, allowing for longer operating times without discomfort.

The Craftsman 172.79957 also incorporates advanced technology to enhance its functionality. For instance, it features a powerful motor that provides ample torque and speed, making it efficient for various tasks such as cutting, drilling, and fastening. This motor is paired with an intelligent speed control system, allowing users to easily adjust the speed according to the specific requirements of each project. This makes the Craftsman 172.79957 a versatile tool, suitable for numerous applications, from precise tasks to more intensive operations.

Additionally, the tool boasts a range of accessories designed to expand its capabilities. These include various drill bits, saw blades, and other attachments that can easily be swapped out, enabling users to tackle a wide array of jobs without the need for multiple tools. The quick-release chuck system further enhances usability, allowing for fast and easy changes of accessories.

Safety is another highlight of the Craftsman 172.79957. It is equipped with built-in safety features such as an electric brake that stops the tool instantly, minimizing the risk of accidents. Moreover, the tool's design includes protective guards and finger grips that ensure a secure hold, adding an extra layer of safety during operation.

In summary, the Craftsman 172.79957 is a powerful and reliable tool that combines rugged construction, ergonomic design, and innovative technologies. Whether you are a seasoned professional or a hobbyist, this tool is designed to provide the performance and versatility needed to complete a variety of tasks efficiently and safely. Its robust features, coupled with a focus on user comfort and safety, make it an excellent addition to any tool collection.