Dolmar MH-2556 instruction manual Meters

Page 5

Refueling

-Before refueling, stop the engine.

-Never refuel near naked flames

-Do not smoke when refueling.

-Always allow sufficient time for the engine to cool down before refueling.

-Take care not to let your skin come into contact with petroleum products. Do not inhale gasoline fumes and always wear protective gloves when refueling. Change and clean protective wear at regular intervals.

-Take extra care to avoid spilling gasoline and oil in order to avoid contamination of the ground (environmental protection). If gasoline or oil has been spilled onto the hedge trimmer, immediately wipe the surface of the hedge trimmer with a rag. To avoid spontaneous combustion, allow wet rags to dry sufficiently before discarding them into an appropriate, covered container.

-Make sure that no fuel comes in contact with your clothing. Change fuel- contaminated clothing immediately (fire hazard).

-Close the fuel tank and tighten the fuel tank cap securely. To restart the engine, transfer the pole hedge trimmer to a location at least 3 meters away from the place of refueling.

-Check the fuel tank cap at regular intervals to make sure that the cap is securely fastened.

-Never refuel the machine in an enclosed room. Fuel vapors accumulate at ground level (risk of explosion).

-Store fuel in appropriate containers only, and make sure that stored fuel is out of

the reach of children.

3 meters

-To prevent damage to fuel lines and engine parts, avoid using gasoline that contains ethanol or methanol (types of alcohol) when mixing gasoline with two- stroke engine oil.

Operation

-During operation, hold the pole hedge trimmer with both hands at all times.

-Only use the pole hedge trimmer in good light and visibility conditions. Beware of slippery and wet areas (ice and snow) during the cold season (danger of slipping), and always ensure secure footing.

-Never use the pole hedge trimmer while standing on an unstable surface or a steep slope.

-Never use the pole hedge trimmer while standing on a ladder.

-Never climb a tree to use the pole hedge trimmer from the tree.

-To avoid stumbling or falling over objects, never walk backwards when working with the pole hedge trimmer.

-Always stop the engine before cleaning or servicing the machine. Also, refrain from replacing parts before the engine has been stopped.

-Do not operate the pole hedge trimmer if the cutting unit is damaged or worn.

Maintenance instructions

-Always do your utmost to keep pollution and noise emissions as low as possible when operating the pole hedge trimmer. Pay special attention to correct adjustment of the carburetor.

-Clean the hedge trimmer at regular intervals and periodically check whether all nuts and bolts are securely tightened.

-Never service or store the pole hedge trimmer in the vicinity of naked flames, sparks, etc.

-Empty the fuel tank before storage, and always store the pole hedge trimmer in a well-ventilated locked room. Make sure the pole hedge trimmer is out of children's reach at all times.

-To prevent further damage and/or personal injury, refrain from repairing a malfunctioning pole hedge trimmer if not qualified to do so. For repairs always contact your dealer or an authorized service agent.

Do not attempt to modify or remodel the pole hedge trimmer as this may affect operation safety.

5

Image 5
Contents MH-2556 English SymbolsSafety Instructions Page Meters Page Technical Data MH-2556 Designation of Parts Attaching the Handle Connecting the Trimmer Unit to the PoleUsing the Shoulder Strap FUEL/REFUELING Starting the Engine Precautions Before Starting the EngineStopping the Engine Checking and Adjusting the Idling SpeedOperating the Pole Hedge Trimmer Sharpening the blade MaintenanceBlade adjustments Page Storage Maintenance ScheduleTroubleshooting Emisson Compliance Period Federal Emission Component Defect WarrantyObtaining Warranty Service HOW to Make a Claim French SymbolesConsignes DE Sécurité Page Mètres Page Spécifications MH-2556 Nomenclature Utilisation DE LA Bandoulière Raccordement DE LA TAILLE-HAIE À LA RallongeFixation DE LA Poignée Alimentation EN Carburant Démarrage DU Moteur Précautions Avant LE Démarrage DU MoteurVérification ET Réglage DE LA Vitesse DE Marche À Vide Arrêt DU MoteurFonctionnement DE LA TAILLE-HAIES À Rallonge Entretien Réglage des lames Page Dépannage RemisageProgramme D’ENTRETIEN Prohibición SímbolosInstrucciones Para SU Seguridad Page Metros Page Especificaciones MH-2556 Nombre DE LAS Piezas Utilización DE LA Correa AL Hombro Instalación DEL MangoCOMBUSTIBLE/CARGA DE Combustible Arranque DEL Motor Precauciones Antes DE Arrancar EL MotorVerificación Y Ajuste DE LA Velocidad DE Marcha Mínima Parada DEL MotorFuncionamiento DEL Cortasetos Articulado DE Altura Afilado de la cuchilla MantenimientoAjustes de cuchilla Page Localización DE Averías AlmacenamientoPrograma DE Mantenimiento Memo Dolmar GmbH Postfach 70 04 Hamburg Germany
Related manuals
Manual 54 pages 60.51 Kb