Black & Decker GLC120 Congratulations, EC Declaration of Conformity, Intended USE, Know your tool

Page 9

E N G L I S H

CORDLESS GRASS TRIMMER GLC120

CONGRATULATIONS!

You have chosen a Black & Decker tool. Our aim is to provide quality tools at an affordable price. We hope that you will enjoy using this tool for many years.

EC DECLARATION OF CONFORMITY

GLC120

Black & Decker declares that these tools conform to: 98/37/EC, 89/336/EEC, 73/23/EEC, EN 60335, EN 786, EN 50260, EN 55014, EN 61000

Level of sound pressure, measured according to 84/538/EEC:

 

 

 

GLC120

LpA

(sound pressure)

dB(A)

83

LWA

(acoustic power)

dB(A)

96

Always wear ear protection if the sound pressure exceeds 85 dB(A).

Hand/arm weighted vibration value according to 98/37/EC:

GLC120

< 2.5 m/s2

Colin Dyke

Vice President of Engineering

Brockville, Ontario K6V 5W6

Canada

INTENDED USE

Your Black & Decker grass trimmer GLC120 has been designed for trimming and finishing lawn edges and to cut grass in confined spaces.

This tool is intended for consumer use only. Your Black & Decker charger has been designed for charging Black & Decker batteries of the type supplied with this tool.

SAFETY INSTRUCTIONS

Warning symbols

The following symbols are used in this manual:

Denotes risk of personal injury, loss of life or damage to the tool in case of non- observance of the instructions in this manual.

Denotes risk of electric shock.

Read the manual prior to operation.

Fire hazard.

Know your tool

Warning! When using battery-powered tools, basic safety precautions, including the following, should always be followed to reduce the risk of fire, leaking batteries, personal injury and material damage.

Read all of this manual carefully before operating the tool.

Before operating the tool, make sure that you know how to switch it off in an emergency.

9

Image 9
Contents GLC120 Copyright Black & Decker Page Page Page Page Page Page Congratulations Safety InstructionsEC Declaration of Conformity Intended USESafety of others Using your toolWork area Personal protectionElectrical Safety Additional safety instructions for batteries and chargersCharging the battery fig. G & H Fitting the guard fig. BFitting the secondary handle fig. D Setting the tool to trimming or edging mode fig. K, L & M Adjusting the position of the secondary handle fig. a & JSwitching on and off fig. N Hints for optimum useMaintenance Storage Battery fig. O & PTool runs slowly Automatic line feed does not workGuarantee Guarantee policyAfter Sales Service Other Outdoor Tools Page Page Page Dealer address Guarantee Card