Maintenance, Troubleshooting | Black & Decker GL420 guide

◆If the tool starts running slowly, reduce the load.

◆In order to achieve optimum cutting results, only cut dry grass.

MAINTENANCE

Your Black & Decker tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.

Before performing any maintenance, switch off and unplug the tool.

◆Regularly clean the ventilation slots in your tool using a soft brush or dry cloth.

◆Regularly clean the cutting line and spool using a soft brush or dry cloth.

◆Regularly use a blunt scraper to remove grass and dirt from the underneath of the guard.

Do not use any abrasive or solvent-based cleaner.

Fitting a new spool of cutting line (fig. D) Replacement spools of cutting line are available from your Black & Decker dealer (cat. no. A6481).

◆Unplug the tool.

◆Keep the tabs (11) depressed and remove the spool cover (12) from the housing (7).

◆Remove the empty spool (13) from the housing.

◆Remove any dirt and grass from the housing.

◆Take the new spool and unwind approx. 9 cm of cutting line.

◆Feed the cutting line through the eyelet (14).

◆Push the spool onto the drive shaft (15) and rotate it slightly until it is seated. Make sure that the cutting line is not trapped under the spool and that 9 cm of cutting line protrudes from the housing.

◆Align the tabs on the spool cover with the holes in the housing.

◆Push the cover onto the housing until it snaps securely into place.

If the cutting line protrudes beyond the trimming blade (6), cut it off so that it just reaches the blade.

E N G L I S H

Winding new line onto an empty spool (fig. E) You may wind new cutting line onto an empty spool. Replacement packs of cutting line are available from your Black & Decker dealer (cat. no. A6170 (25 m), A6171 (40 m)).

◆Remove the empty spool from the tool as described above.

◆Remove any old cutting line from the spool.

◆Feed 2 cm of cutting line into one of the holes (16) in the spool as shown.

◆Bend the cutting line and anchor it in the L-shaped slot (17).

◆Wind the cutting line onto the spool in the direction of the arrow (18). Make sure to wind the line on neatly and in layers. Do not criss- cross.

◆When the wound cutting line reaches the recesses (19), cut the line. Let the line protrude approx. 9 cm from the spool and hold a finger on the line to keep it in place.

◆Proceed as described above to fit the spool on the tool.

Only use round 1.5 mm diameter Black & Decker cutting line. Do not use Reflex Plus twisted cutting line. The use of an incorrect type of cutting line can damage the auto feed mechanism and will void the warranty.

TROUBLESHOOTING

If your tool seems not to operate properly, follow the instructions below. If this does not solve the problem, please contact your local Black & Decker repair agent.

Before proceeding, unplug the tool.

Tool does not start

◆Check that the power cables are properly connected.

◆Check the mains fuses.

Tool vibrates strongly

◆Carefully clean the spool housing.

◆If this does not solve the problem, unwind the line from the spool and rewind it more tightly.

GL420 specifications

The Black & Decker GL420 is a versatile and efficient electric strimmer that stands out in the world of garden maintenance tools. Designed for both novice and experienced gardeners, this tool provides a reliable solution for keeping lawns and garden edges neat and tidy.

One of the main features of the GL420 is its powerful 420W motor, which delivers robust performance suitable for tackling various types of overgrowth. This makes the strimmer effective for dealing with thick grass, weeds, and hard-to-reach areas around the garden. With a cutting width of 30 cm, the GL420 allows for a wide swath with each pass, significantly reducing the time required to complete your gardening tasks.

The GL420 incorporates a unique automatic line feed system, which ensures that the cutting line is fed smoothly without the need for manual adjustments. This feature not only enhances ease of use but also ensures optimal performance, allowing you to focus on your gardening rather than wrestling with the tool. The strimmer uses a lightweight and durable nylon line, which is effective for cutting grass and can be easily replaced when worn out.

Comfort and ease of use are key considerations in the design of the GL420. The strimmer features an adjustable auxiliary handle, providing a comfortable grip and improving maneuverability during operation. This feature helps reduce fatigue during extended periods of use, ensuring that gardeners can work efficiently without discomfort. Additionally, the telescopic shaft can be adjusted to suit users of different heights, making it accessible for everyone.

Another noteworthy technological element of the Black & Decker GL420 is its lightweight design, weighing approximately 2.2 kg. This lightweight construction makes it easy to carry and maneuver, allowing gardeners to navigate complex landscapes without feeling weighed down. Coupled with its ergonomic design, the GL420 is an ideal tool for tackling garden maintenance tasks without straining the body.

In conclusion, the Black & Decker GL420 electric strimmer is a well-rounded gardening tool that combines power, convenience, and user-friendly features. With its efficient motor, automatic line feed, and adjustable design, it is a great option for anyone looking to maintain their garden with ease and precision. Whether you have a small backyard or a larger garden, the GL420 is sure to deliver reliable performance and make lawn care a much more manageable task.