Black & Decker ST7201, ST7200, 90518528 instruction manual KEY Information YOU should Know

Page 1

Trimmer/Edger

INSTRUCTION MANUAL

Catalog Numbers: GH600, ST7200, ST7201

Date Code:

THANK YOU FOR CHOOSING BLACK & DECKER! GO TO WWW.BLACKANDDECKER.COM/NEWOWNER

TO REGISTER YOUR NEW PRODUCT.

BEFORE RETURNING THIS PRODUCT

FOR ANY REASON PLEASE CALL

1-800-544-6986

BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION AVAILABLE, CATALOG No., TYPE No., AND DATE CODE . IN MOST CASES, A BLACK & DECKER REPRESENTATIVE CAN RESOLVE THE PROBLEM OVER THE PHONE. IF YOU HAVE ASUGGESTION OR COMMENT, GIVE US ACALL. YOUR FEEDBACK IS VITALTO BLACK & DECKER.

KEY INFORMATION YOU SHOULD KNOW:

•The guard must be installed before trimming or edging - if not, the motor will overheat.

•When replacing the line, use only .065 in. diameter ROUND line - other- wise the unit will not function properly.

•Do not bump the feed head against the ground - it will disrupt the feed mechanism.

•Angle tool slightly (5° to 10°) when trimming.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

VEA EL ESPAÑOL EN LA CONTRAPORTADA.

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.

Cat. No. GH600, ST7200, ST7201 Form No. 90518528 Rev. 1

NOV. ‘07

Copyright © 2007 Black & Decker

Printed in China

SAFETY GUIDELINES - DEFINITIONS

It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.

WARNING: IMPORTANT SAFETY WARNINGS AND INSTRUCTIONS

WARNING: When using gardening appliances, basic safety precautions should always be followed to reduce risk of fire, electric shock, and personal injury, including the following.

WARNING: Some dust created by this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•compounds in fertilizers

•compounds in insecticides, herbicides and pesticides

•arsenic and chromium from chemically treated lumber

To reduce your exposure to these chemicals, wear approved safety equipment such as dust masks that are specially designed to filter out microscopic particles.

•USE THE RIGHT TOOL – Do not use this tool for any job except that for which it is intended.

•DON’T OVERREACH – Keep proper footing and balance at all times.

•DON’T ABUSE CORD – Don’t yank cord from power supply. Keep cord from heat, oil, and sharp edges.

•DAMAGE TO UNIT – If you strike or become entangled with a foreign object, stop tool imme- diately, unplug, check for damage and have any damage repaired before further operation is attempted. Do not operate with a broken hub or spool.

•DAMAGE TO CORD – Keep power cord away from rotating line. If you damage the cord, unplug it from the power supply before moving the tool or examining the damage. A dam- aged cord must be replaced before further use.

•DISCONNECT TOOL – when not in use, when replacing line, or prior to cleaning.

•AVOID DANGEROUS ENVIRONMENTAL CONDITIONS – Do not use electric tools in damp or wet locations. Follow all instructions in this Instruction Manual for proper opera- tion of your tool. Don’t use the tool in the rain.

•DO NOT OPERATE portable electric tools in gaseous or explosive atmospheres. Motors in these tools normally spark, and the sparks might ignite fumes.

•STORE IDLE TOOLS INDOORS – When not in use, tools should be stored indoors in a dry, locked-up place out of reach of children.

•GROUND FAULT CIRCUIT INTERRUPTER (GFCI) protection should be provided on the circuits or outlets to be used for the gardening appliance. Receptacles are available hav- ing built in GFCI protection and may be used for this measure of protection.

•SECURE EXTENSION CORD using the cord retainer shown in Figure 5.

•STAY ALERT – Watch what you are doing. Use common sense. Do not operate tool when you are tired.

•MAINTAIN APPLIANCES WITH CARE – Follow instructions in maintenance section. Inspect extension cords periodically and replace if damaged. Keep handles dry, clean and free from oil and grease.

•CHECK DAMAGED PARTS – Before further use of the appliance, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other condition that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless otherwise indicated elsewhere in this manual.

• WARNING: When servicing double insulated tools, USE ONLY IDENTICAL REPLACEMENT PARTS. Replace or repair damaged cords.

• WARNING: To prevent electrical shock hazard, use only with an extension cord suitable for outdoor use. Always connect extension cords to a fused line or one protected by a circuit breaker.

SAFETY WARNINGS AND INSTRUCTIONS: POLARIZED PLUGS

To reduce the risk of electric shock, this equipment has a polarized plug (one blade is wider than the other) and will require the use of a polarized extension cord. The appliance plug will fit into a polarized extension cord only one way. If the plug does not fit fully into the extension cord, reverse the plug. If the plug still does not fit, obtain a correct polarized extension cord. A polarized extension cord will require the use of a

polarized wall outlet. This plug will fit into the polarized wall outlet only one way. If the plug does not fit fully into the wall outlet, reverse the plug. If the plug still does not fit, contact a qualified electrician to install the proper wall outlet. Do not change the equipment plug, extension cord receptacle, or extension cord plug in any way.

SAFETY WARNINGS AND INSTRUCTIONS: EXTENSION CORDS

Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. The table shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord. If the exten- sion will be used outside, the cord must be suitable for outdoor work. The letters “WA” on the cord jacket indicate that the cord is suitable for outdoor use.

 

 

 

 

 

Minimum Gage for Cord Sets

 

 

 

Volts

 

Total Length of Cord in Feet

 

120V

 

0-25

26-50

51-100

101-150

 

 

 

 

 

 

(0-7,6m)

(7,6-15,2m)

(15,2-30,4m) (30,4-45,7m)

 

 

Ampere Rating

 

 

 

 

 

 

More

 

Not more

American Wire Gage

 

 

 

Than

 

Than

 

 

 

 

 

 

0

-

6

18

16

16

14

 

6

-

10

18

16

14

12

 

10

-

12

16

16

14

12

 

12

-

16

14

12

Not Recommended

 

 

 

 

 

 

 

 

 

 

1

1A

 

 

4

23

4A5

READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING.

• Before any use, be sure everyone using this garden appliance reads and understands all safety instructions and other information contained in this manual.

• Save these instructions and review frequently prior to use and in instructing others.F

GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL

APPLIANCES

•

ALWAYS WEAR EYE PROTECTION – Wear safety spectacles or goggles at all times

 

 

 

when this tool is plugged in.

 

 

•

GUARD – Do not use this tool without guard attached.

 

 

•

DRESS PROPERLY – Do not wear loose clothing or jewelry. They can be caught in

 

 

 

moving parts. Rubber gloves and substantial rubber soled footwear are recommended

7

8

 

when working outdoors. Don’t operate the tool when barefoot or wearing open sandals.

 

Wear long pants to protect your legs. Wear protective hair covering to contain long hair.

 

 

•

NYLON LINE – Keep face, hands and feet clear of rotating nylon line at all times.

 

 

•

THE ROTATING LINE PERFORMS A CUTTING FUNCTION – Use care when trimming

 

 

 

around screens and desirable plantings.

 

 

•

KEEP ALL BY-STANDERS AWAY – at a safe distance from work area, especially children.

 

9

•

IMPORTANT WARNING – When being used as an Edger, stones, pieces of metal and

 

 

other objects can be thrown out at high speed by the line. The tool and guard are designed

 

 

 

to reduce the danger. However, the following special precautions should be taken:

 

 

 

• MAKE SURE that other persons and pets are at least 100 feet away.

 

 

 

• TO REDUCE THE RISK of rebound (ricochet) injury, work going away from any nearby

 

 

 

solid object such as wall, steps, large stone, tree, etc. Use great care when working close

 

 

 

to solid objects and where necessary, do edging or trimming by hand.

 

 

•

AVOID ACCIDENTALLY STARTING – Don’t carry plugged-in tool with finger on trigger.

 

 

• DO NOT FORCE THE TOOL – at a rate faster than the rate at which it is able to cut effectively.

6

5°-10°

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Safety Warnings and Instructions Extension Cords Safety Warnings and Instructions Polarized PlugsRead and Understand ALL Instructions Before Using KEY Information YOU should KnowOption 2 Rewinding Spool Using Bulk Line Option 1 Accessory Replacement SpoolLine Feeding Clearing Jams and Tangled LinesFIL DE Coupe Mode D’EMPLOIEntretien AccessoiresInformación Clave QUE Debe Saber LEA Y Comprenda Todas LAS Instrucciones Antes DE UsarMantenimiento ENSAMBLAJE/AJUSTES InicialesInstrucciones DE Operacion
Related manuals
Manual 6 pages 23.76 Kb

90518528, ST7201, ST7200 specifications

The Black & Decker ST7200, GH600, and ST7201 are excellent string trimmers designed to meet the needs of both homeowners and gardening enthusiasts. These models stand out for their blend of power, versatility, and user-friendly features, which make yard maintenance efficient and hassle-free.

The Black & Decker ST7200 is a lightweight electric string trimmer that offers effortless operation with its 12-amp motor, capable of tackling tough weeds and overgrown grass. What sets the ST7200 apart is its innovative AFS (Automatic Feed System) technology, which automatically feeds the line as needed, eliminating the hassle of manual adjustments. This ensures uninterrupted trimming and allows users to focus on their task without distractions.

Meanwhile, the GH600 is another reliable electric trimmer, featuring a 14-inch cutting width that provides ample coverage. Its powerful 5.0-amp motor is paired with a lightweight design, making it easy to maneuver in tight spaces and around obstacles. Additionally, the GH600 incorporates a 2-in-1 design that not only allows for trimming but also edges with just a flip of the device. This dual functionality is perfect for homeowners looking for versatility in their gardening tools.

The ST7201 model also deserves mention for its ergonomic design and adjustable height feature, which enhances comfort during use. It boasts a rotating handle that allows users to switch from trimming to edging in seconds. With a 12 amp motor and a high-performance line feed system, the ST7201 offers both power and convenience for extensive trimming tasks.

All three models are designed with user comfort in mind. They feature lightweight constructions, making them easy to lift and operate for extended periods without fatigue. The handles provide a secure grip, while the trimmers are equipped with safety features to prevent accidental starts.

In summary, the Black & Decker ST7200, GH600, and ST7201 trimmers are ideal for users who seek efficient, reliable, and versatile lawn care tools. With advanced features like automatic line feeding, ergonomic designs, and dual functionality, these models are tailored to meet the diverse needs of modern gardening, making lawn maintenance an enjoyable task. Whether trimming, edging, or tackling tough weeds, these trimmers deliver exceptional performance and comfort.
Top Page Image Contents