Midland Radio owner manual Programming S.A.M.E. County Codes into the WR-300/301

Page 8

WR-300/301 Owner’s Manual

Programming S.A.M.E. County Codes into the WR-300/301

Helpful Tip: The S.A.M.E. code is created using the following method:

The first digit is the subcounty code-currently 0 in most areas.

The second two digits represent the state code.

The last three digits represent the county code.

“ALL” S.A.M.E. County Codes is the Factory Setting:

Your WR-300/301 weather radio is preprogrammed to receive NWS weather and hazard alert transmissions for all S.A.M.E. county codes within range. If this is what you want, leave the radio set to “ALL”.

A Single S.A.M.E. County Code:

Press the “MENU” button to open menu options.

Press the “UP” arrow to scroll through menu options until “County Code” is displayed.

Press the “SELECT” button and then the “UP” arrow to scroll through ”SINGLE”, “MULTIPLE” or “ALL”.

Display “SINGLE”, then press the “SELECT” button.

“Code 01” will be displayed. Press the “SELECT” button to program this code. The first digit space will start blinking.

Use the “UP” arrow to scroll through the digits 0-9. Input the first digit then press the “RIGHT” arrow to save that selection and move to the next digit.

Continue programming all 6 digits in this way. When finished, press the “SELECT” button and your entered code will be saved.

Multiple S.A.M.E. County Codes:

Press the “MENU” button to open menu options.

Press the “UP” arrow to scroll through menu options until “County Code” is displayed.

Press the “SELECT” button and then the “UP” arrow to scroll through “SINGLE”, “MULTIPLE” or “ALL”.

Display “MULTIPLE”, then press “SELECT”.

Use the “UP” arrow to scroll through code locations 1-23. You are able to program up to 23 different county codes into your WR-300/301 weather radio.

Display the location you want then press the “SELECT” button. The first digit space will start blinking.

Use the “UP” arrow to scroll through the digits 0-9. Input the first digit then press the “RIGHT” arrow to save that selection and move to the next digit.

Continue programming all 6 digits in this way. When finished, press the “SELECT” button and your entered code will be saved.

To program your next code, press the “UP” arrow to go to the next code location.

When you have entered all your desired codes, press the “MENU” button to store your settings.

Page 8

www.midlandradio.com

Image 8
Contents All Hazards Weather Alert Radio Quick Start Instructions Weather Channel FrequenciesTable of Contents Product Information Icons on the Display WR-300/301 Accessory JacksWR-300/301 Controls Setting the AM /FM Clock Radio Functions Set the TimeProgramming Notes Getting your S.A.M.E. County CodesProgramming S.A.M.E. County Codes into the WR-300/301 Single S.A.M.E. County CodeSetting the Alert Volume Reviewing Stored S.A.M.E. CodesChoosing an Alert Type Voice or Siren To Turn the Alert on and OFFSelectable Alert Reference Chart Page Page Testing the Alert Test Signals Broadcast by NWSReviewing Alerts No Reception WarningAM/FM Radio Troubleshooting Problem SuggestionReception About NOAA, NWS, & S.A.M.E. County Codes M.E. County Code Record Specifications FCC Compliance InformationOne Year Limited Warranty Service Accessories 18-259WPage Ble for unintentional errors or omissions on its packaging