Snapper 3500 PSI Pressure Washer
KNOW YOUR PRESSURE WASHER
Read this owner’s manual and safety rules before operating your high pressure washer.
Compare the illustrations with your high pressure washer to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.
Spray Gun | Spray Nozzles |
| |
Fuel Tank |
|
Oil Fill Cap/Dipstick
Nozzle Extension with
Quick Connect
Pump equipped with
Automatic Cool Down System
Pressure
Control Knob
Chemical Injection Siphon/Filter
Air Filter — Protects engine by filtering dust and debris out of intake air.
Automatic Cool Down System — Cycles water through pump when water reaches
Chemical Injection Siphon/Filter — Use to siphon detergent or other pressure washer chemicals into the low pressure stream.
Choke Lever — Prepares a cold engine for starting.
Fuel Valve — Used to turn fuel on and off to engine.
Gas Tank — Fill tank with regular unleaded gasoline. Always leave room for fuel expansion.
High Pressure Hose — Connect one end to the water pump and the other end to the spray gun.
High Pressure Outlet with Quick Connect — To
connect high pressure hose.
Rocker Switch
Throttle Lever
Choke Lever
Fuel Valve
Recoil Starter
(on front of engine)
High Pressure Hose
Air Filter
High Pressure Outlet with Quick Connect
Water Inlet
Nozzle Extension with Quick Connect — Allows you to
switch between four different spray nozzles.
Oil Fill Cap/Dipstick — Fill engine with oil here.
Pressure Control Knob — Varies the pressure of the high pressure spray.
Pump — Develops high pressure.
Recoil Starter — Use for starting the engine manually.
Rocker Switch - Set this switch to "On" before using recoil starter. Set switch to "Off" to switch off engine.
Spray Gun — Controls the application of water onto cleaning surface with trigger device. Includes safety latch.
Spray Nozzles — Chemical injection, 0°, 15°, 25°, and 40°: for various cleaning applications.
Throttle
Water Inlet — Connect garden hose here.
4