TIME ZONE
•Press MODE button once to select hour and minutes with the day of the week display.
•Select the Time Zone by pressing and holding UP ( ? ) button for 3 seconds
•Keep holding UP ( ? ) button until the desired US Time Zone (Pacific, Mountain, Central or Eastern) is highlighted on the display’s US map, located to the right of the time display and above the day of the week
•Release the UP ( ? ) button. The Time Zone is set.
TIME AND CALENDER
•Press and hold MODE button until the day of week language abbreviation “ 
” will flash
•Press the UP (? ) or DOWN (? ) selecting the day of the week in English, German, French, Italian, Spanish, Dutch or Swedish.
•After the language of weekday is set, press MODE button
to confirm and move to the next parameter (year)
•Continue setting the year, month, day, time format (12 or 24 hours), local hour and minutes, using the same technique
•After programming is complete the display will return to the default hour and minutes with seconds display.
CLOCK ALARMS
There are two time alarms – Weekday alarm ( 
) and Single day alarm( 
) - and one Ice Warning Alarm ( 
).
•If Weekday ( 
) alarm is activated, it will sound at the set time and the alarm icon will flash Mondays through Fridays
•If Single ( 
) day alarm is activated, it will sound at the set time and the alarm icon will flash only for this specific day and will not activate on subsequent days
•If Ice Warning Alarm ( 
) is activated, it will sound
at the set time and alarm icon will flash once the remote temperature for Channel One (1) will reach 32°F(0°C) and below
NOTE: Ice Warning Alarm can be set only if Weekday and/or the single alarm are programmed.
SETTING THE WEEKDAY ( 
) AND SINGLE DAY ( 
) ALARMS
•Press ALARM button once to enter into the alarms setting
mode. The default alarm is a Weekday alarm ( 
). The abbreviation “ 
” with a letter “ 
” next to it will be displayed, if the alarm has not been set previously
•Press and hold ALARM button for two seconds. The hour digit
will flash | 17 |