Meade TE346W user manual Placement, Operation, Main Unit, Time, Weather

Page 5

PLACEMENT

The remote sensor should be placed under eaves or a similar location with free air circulation, sheltered from direct sunlight and extreme weather.

Ideally, place the remote sensor over soil, rather than asphalt, which would cause false readings.

Avoid placing the remote sensor near sources of heat, such as chimneys and heating elements.

Avoid areas that collect heat from the sun and radiate heat, such as metal, brick or concrete structures, paving, and patios.

The international standard for the valid air temperature measurements is 4 feet (1.25meters) above the ground.

OPERATION

Immediately after batteries are installed, the remote sensor will start transmitting a temperature data to the main unit.

MAIN UNIT

FEATURES

TIME

Precise time and date set via signals from the US Atomic clock

12 or 24 hour time format

Manual adjustment of time and date

Calendar displays in date with month format

Weekday abbreviation in 7 languages English, German, French, Italian, Spanish, Dutch and Swedish

Dual crescendo alarms with snooze

Programmable ice warning alarm

WEATHER

Weather forecast for the next 12 to 24 hour in seven large icons: sunny, slightly cloudy, cloudy, rainy, heavy rain, snowy and heavy snow.

User-defined high/ low temperature alarm

Indoor/ outdoor temperature in up to 3 remote locations (additional sensors required)

Indoor humidity with comfort level indicators (Dry, Humid, etc)

Minimum and maximum memories of temperature and humidity

Auto scanning mode – 3 channels of outdoor readings will be displayed one by one automatically

5

Image 5
Contents Page Introduction Before YOU Begin InstallationMounting FeaturesOperation PlacementMain Unit TimeFront Rear UP ? button Alarm buttonChannel button WALL- Mount holesTEMPERATURE/ Humidity Window Battery InstallationGetting Started Weather Forecast Remote Sensors StatusProgramming Temperature in Celsius or Fahrenheit Viewing Remote Channel TemperatureSetting Temperature Alarm Activating or Deactivating Temperature AlarmsCOM Comfort Level IndicationWET DRYClock Alarms Manual SettingsSetting the Weekday W and Single DAY S Alarms Time ZoneACTIVATING/ Deactivating Alarms Setting the ICE Warning Alarm PRE-ALCleaning Changing BatteriesSpecifications PrecautionsDeclaration of Conformity FCC StatementStandard Warranty Information Battery Safety InstructionsMeade Instruments Corp