Hydraulic Reservoirs | Snapper Mount Mower specs

LOOSEN BOLTS. SLIDE PLATE TO MAKE MACHINE TRACK STRAIGHT

ADJUSTMENT

PLATE

LEFT SIDE MOTION CONTROL LEVER

K. Check fluid level in reservoirs. Add SAE 20W50 automotive oil as required to bring fluid level to 1- 1/2” from top of filler neck. Do Not overfill.

L. Install and tighten filler cap.

HYDRAULIC

RESERVOIRS

FIGURE 4

STEP 10: HYDRAULIC SYSTEM, PURGING When initially putting hydraulic system into service, one or both of the wheel drives may not pull properly. This is likely to be caused by air entrapped in the system. If you experience a pulling issue during initial setup or after completing repairs, perform the following procedure to purge the air from one or both of the hydraulic drive systems.

IMPORTANT: WHEN REPLACING THE HYDRAULIC FLUID FILTERS, PRE-FILL BOTH WITH OIL (SAE 20W50 API SL) BEFORE INSTALLING. PRE-FILLING THE FILTERS WITH OIL WILL REDUCE OR POSSIBLY ELIMINATE THE NEED TO PURGE THE SYSTEM OF ENTRAPPED AIR.

A.Locate hydraulic reservoirs underneath operator’s seat. After thoroughly cleaning the area around the top of each reservoir, remove filler cap. Bring fluid to proper level (1-1/2” below the top of the filler neck). With engine off, add SAE 20W50 automotive oil. See Figure 5.

B.Open pressure relief valve on hydraulic pump, turning counter clockwise 2 full turns. See Figure 6.

C.Carefully raise the rear of the machine so the wheels are off of the ground. Securely block the machine to prevent it from falling.

D.While seated in the operator’s position, start the engine. Place engine speed control in FAST position.

E.Release parking brake and move motion control levers out of the neutral lock position.

F.Slowly move motion control levers to the full forward and then to the full reverse positions. Repeat this process 6 times.

G.Stop engine and wait for all rotation to stop before leaving the operator’s position.

H.Close pressure relief valve on hydraulic pump, turning clockwise. Tighten snuggly.

I.With pressure relief valve closed, repeat Steps

Dthru G.

J.Remove blocks and lower rear of machine.

FIGURE 5

ROTATE RELIEF VALVE

COUNTERCLOCKWISE

TO RELIEVE PRESSURE

RELIEF VALVE

FIGURE 6

Mount Mower specifications

The Snapper Mount Mower has become a standout choice for both residential and commercial lawn care professionals, known for its innovative features, powerful performance, and user-friendly design. This mower is constructed with a focus on efficiency and durability, making it a preferred option for anyone looking to maintain a well-manicured lawn.

One of the key highlights of the Snapper Mount Mower is its robust engine options. Equipped with either a reliable gas engine or a quiet yet efficient electric motor, the mower provides ample power to handle various terrain types. The commercial-grade engines ensure longevity and performance while reducing noise levels - an essential factor for suburban areas.

The mower comes with a unique floating deck design, which allows it to adapt effortlessly to uneven ground surfaces. This design feature helps the blades maintain optimal contact with the grass, resulting in a more even and clean cut. The Snapper Mount Mower is also equipped with a rear discharge system, allowing for efficient grass dispersal without the buildup of clippings, ensuring a pristine finish.

Another feature that sets this mower apart is its user-friendly control panel. The intuitive controls are strategically positioned for ease of use, allowing operators to adjust speed and blade height without losing focus on the task at hand. The adjustable cutting height ranges from 1.5 to 4 inches, giving users the flexibility to customize their mowing experience based on grass type and desired finish.

In terms of maneuverability, the Snapper Mount Mower shines with its zero-turn radius capability. This allows for quick navigation around obstacles like trees and garden beds, making mowing faster and more efficient. The sturdy tires provide excellent traction, allowing the mower to traverse various terrains with ease.

Safety features include an automatic engine shut-off when the operator leaves the seat and reinforced cutting decks designed to withstand rough conditions. The Snapper Mount Mower is also designed for easy maintenance, featuring accessible components that simplify tasks such as oil changes and blade replacements.

Innovation continues with advanced technology integration, including options for Bluetooth connectivity that allow users to monitor mower performance and maintenance schedules through a dedicated smartphone app.

In summary, the Snapper Mount Mower combines powerful performance, innovative design, and user-centered features, making it a reliable tool for achieving a beautifully maintained lawn. With its durability and efficiency, this mower not only meets but exceeds the expectations of lawn care enthusiasts and professionals alike.