Snapper ESPV21, ESPV21S To adjust idler spring tension, To decrease minimum ground speed

Page 15

Section 4 - REPAIR & ADJUSTMENTS

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

4.3GROUND SPEED CONTROL ADJUSTMENT 4.3.1. IDLER SPRING TENSION ADJUSTMENT Correct idler spring tension assures that mower will achieve fastest attainable speed when ground speed control lover is placed in ‘FAST’ position.

1. Remove rear cover from mower. Refer to Section “Rear Cover Removal & Installation”.

2. Idler spring tension is adjusted properly when:

a. With lever in ‘SLOW’ position (see Figure 4.4), belt is relaxed, and idler spring on end of ground speed control cable has no extension. See Figure 4.6.

GROUND SPEED

LEVER IN ‘SLOW’

POSITION

SPRING HAS NO

TENSION

INNER NUT

OUTER NUT

BELT IS RELAXED

FIGURE 4.6

b. With lever in ‘FAST’ position (see Figure 4.4), belt is tight, and idler spring on end of ground speed control cable is extended approx. 1”. See Figure 4.7.

GROUND SPEED

UNEXTENDED

LEVER IN ‘FAST’

LENGTH

POSITION

1”

SPRING LENGTH

BELT IS TIGHT

EXTENDED 1”

 

FIGURE 4.7

To adjust idler spring tension:

Loosen outer nut on end of ground speed cable, and run inner nut in toward cable (clockwise) or out from cable (counterclockwise) by 1/2 turn increments until correct adjustments are attained. See Figure 4.6. Be sure to tighten outer nut.

3.Replace rear cover.

4.3.2.MINIMUM GROUND SPEED ADJUSTMENT If mower is traveling too fast or too slow when ground speed control lever is placed in ‘SLOW’ position, minimum ground speed can be adjusted. NOTE: Before adjusting minimum ground speed, be sure idler spring tension is adjusted correctly, as idler spring tension may affect minimum ground speed. Refer to Section “Idler Spring Tension Adjustment”.

1. Remove rear cover from mower. Refer to Section “Rear Cover Removal & Installation”.

2. Place ground speed control lever in ‘SLOW’ position. See Figure 4.4.

3. Adjust minimum ground speed:

To decrease minimum ground speed:

Remove end of idler spring from current adjustment hole, and relocate spring one hole closer to idler arm pivot bolt. See Figure 4.7a.

To increase minimum ground speed:

Remove end of idler spring from current adjustment hole, and relocate spring one hole farther from idler arm pivot bolt. See Figure 4.7a.

ADJUSTMENT

HOLES

INCREASE MINIMUM

GROUND SPEED

DECREASE MINIMUM GROUND SPEED

IDLER PIVOT BOLT

FIGURE 4.7a

NOTE: After adjusting minimum ground speed, readjustment of idler spring tension may be necessary.

4.Replace rear cover.

5.Check minimum ground speed; repeat adjustment as necessary.

THE DRIVE BELT ON THIS UNIT IS SUBJECT TO WEAR, AND SHOULD BE CHECKED REGULARLY. REPLACE A WORN, FRAYED OR DAMAGED BELT IMMEDIATELY.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Variable Speed European Model Self Propelled Model ‘Easy Line’Option Designation Cutting WidthFrom Previous Column Important Safety InstructionsDo not refuel the machine indoors From PreviousImportant Safety Instructions Table of Contents Familiarization Model ESPV21 Shown IntroductionNomenclature Ground speed control to insure they work freely. See Operating InstructionsPRE-START Check List Starting & Operation Engine & BladeHandle Height Adjustment Starting & Operation Propelling MowerStopping To Remove Recycling Cover Cutting Height AdjustmentEach Notch Raises CUT Recycling OperationDoor Type Bag Installation of Side DischargeInstallation of Grass BAG DeflectorCheck Mower Blade MaintenanceService After First 5 Hours 3.2.1. Change Engine OIL Service PeriodicStorage Procedure Repair & Adjustments Mower Blade Replacement Standard Blade Wear LimitBlade Sharpening Top of transmission pulley removed for clarity Wheel Drive Control AdjustmentTo adjust idler spring tension To decrease minimum ground speedTo increase minimum ground speed Engine Drive Belt Replacement 1. Empty fuel tank Belt ServiceFasteners Rear Cover Problem Probable Cause Corrective Action TroubleshootingUSE HRS Season Service ScheduleService Performed Each MAINTENANCE/REPLACEMENT PartsDecal Identification ESPV21S CE Compliance SpecificationsESPV21 3000Disclaimer of Warranty Year Limited WarrantyPage European 21 ‘EASY LINE’ Walk Behind Mowers

ESPV21, ESPV21S specifications

The Snapper ESPV21 and ESPV21S are innovative lawn care solutions designed to bring efficiency and power to your mowing experience. Both models are built with advanced features that enhance performance, making them exceptional choices for homeowners seeking reliable and effective lawn maintenance tools.

One of the standout features of the Snapper ESPV21 is its powerful engine. The mower is equipped with a robust Briggs & Stratton engine that delivers reliable performance and starts easily even in challenging weather conditions. The ESPV21S takes things a step further with a larger engine option, providing additional power for tackling thicker grass and tougher terrain.

The design of both mowers emphasizes ease of use. The Quick-Switch height adjustment system allows users to easily customize their mowing height with a simple lever, ensuring that you can achieve the perfect cut for your lawn. This feature is particularly beneficial for adapting to different grass types and seasonal growth patterns.

Another significant characteristic is the cutting deck design. The Snapper ESPV21 and ESPV21S feature a 21-inch steel cutting deck that offers durability and a clean cut. This deck is not only designed for efficiency but also promotes excellent grass collection, reducing the need for additional cleaning after mowing. With their mulching capabilities, these mowers can finely chop grass clippings, returning essential nutrients back to the soil.

User comfort is also a priority in the Snapper ESPV21 and ESPV21S models. Both mowers come with adjustable ergonomic handles, allowing users to find a comfortable grip position. The foldable design makes them easy to store in tight spaces, a convenience that is greatly appreciated by many homeowners.

In terms of technology, these mowers incorporate Snapper's patented Hi-Vac technology, which enhances suction and grass collection performance. This feature ensures that grass clippings are efficiently collected, resulting in a tidy lawn with minimal effort.

Safety is another important consideration, and both models are equipped with cutting-edge safety features, including a safety blade brake system that ensures the mower stops quickly if needed. This adds an extra layer of protection for users, making them suitable for families.

In conclusion, the Snapper ESPV21 and ESPV21S are excellent lawn mowers known for their power, efficiency, and user-friendly design. With advanced features such as a durable cutting deck, powerful engines, and innovative technologies, both models offer a reliable solution for maintaining a beautiful lawn throughout the seasons. Whether you have a small yard or a more extensive landscape, these mowers provide the performance and versatility needed for effective lawn care.
Top Page Image Contents