Snapper ERZT20441BVE2 Engine, Chassis, CE Compliance Specifications Transmissions, Dimensions

Specifications

NOTE: Specifications are correct at time of printing and are subject to change without notice.

* Actual sustained equipment horsepower will likely be lower due to operating limitations and environmental factors.

ENGINE:

20 HP* Briggs & Stratton

Make	Briggs & Stratton
Model	20 hp ELS
Horsepower	20 @ 2700 rpm
Displacement	40.0 Cu. in (656 cc)
Electrical System	12 Volt, 9 amp. Alternator, Battery: 230 CCA
Oil Capacity	64 Oz. (1.9 L) w/ Filter

CHASSIS:

Fuel Tank	Capacity: 3.0 Gallons (11.4 L)
Rear Wheels	Tire Size: 18 x 8.50-8
	Inflation Pressure: 15 psi (1,03 bar)
Front Wheels	Tire Size: 11 x 4.00-5
	Inflation Pressure: 25 psi (1,72 bar)

CE COMPLIANCE SPECIFICATIONS:

TRANSMISSIONS:

Hydro-Gear

ZA-DHBB-2D5A-2DCX (LH)

ZA-AHBB-2D5A-2DCX (RH)

Type	EZT
Hydraulic Fluid	Sealed Unit
Speeds	Forward: 0-6.2 MPH (0-9.98 km/h)
@ Specified rpm	Reverse: 0-3 MPH (0-4.83 km/h)
Continuous Torque	115 ft. lbs. (155 N.m.)
Output
Maximum Weight	340 lbs. (154 Kg) per Axle
on Axle

DIMENSIONS:

Overall Length	72” (182,9 cm)
Overall Width	55” (139,7 cm)
Height	38” (96,5 cm)
Weight (apx.)
Snapper	608 lbs. (276 kg)
Simplicity	624 lbs. (283 kg)

Model	ERZT20441BVE2 (Snapper) EJAV20441BVE2 (Simplicity)
RPM’s (Governed)	2700	2700
Kilowatts (kW) (@ Governed RPM’s)	11.29	11.29
Unit Mass (kg)	276	283
Sound Power (LWA) (dBA)	100	100
Sound Pressure (LPA) (dBA)	88	88
Vibration (Hand) (m/s2)	9.8	9.8
Vibration (Body) (m/s2)	0.7	0.7

33