Snapper EMRP216017B Propelling Mower, Stopping, Handle Height Adjustment

Page 7

Section 2 - OPERATING INSTRUCTIONS

2.2 STARTING & OPERATION 2.2.2. ENGINE & BLADE (Choke Models)(Commercial Only)

1.Move engine speed control to the “Choke” position. See Figure 2.4.

NOTE: Stop the engine (and blade) by releasing the blade control.

MOVE CHOKE/ENGINE

SPEED CONTROL TO THE

CHOKE POSITION

PULL ROPE START

HANDLE TO CRANK

ENGINE

GROUND SPEED

CONTROL

FAST SPEED

SLOW SPEED

PULL BLADE

ENGAGE

CONTROL AGAINST

WHEEL DRIVE

HANDLE

CONTROL

 

FIGURE 2.4

NOTE: Do not use choke to start warm engine.

2.Pull blade control against handle.

3.Pull rope start handle to crank engine.

4.After engine starts, move engine speed control away from the choke position to the “Fast” (Rabbit) position and allow a brief warm-up until engine runs smooth.

WARNING

Stop engine and mower blade by releasing the blade control before adjusting ground speed.

2.2.3.PROPELLING MOWER

(Self Propelled Models Only)

1.Stop engine and mower blade by releasing the blade control before adjusting ground speed. Move ground speed control to the desired speed position. See Figure 2.5.

2.Start engine. Refer to Section “Starting & Operation”.

3.Move wheel drive control against handle to engage wheel drive and propel mower forward. See Figure 2.4.

FIGURE 2.5

2.3STOPPING

Stop engine and blade by releasing the blade control. Stop forward motion of mower by releasing the wheel drive control.

2.4HANDLE HEIGHT ADJUSTMENT

The height of the mower handle can be adjusted as follows:

1. Loosen the lower nuts on each lower handle as shown in Figure 2.6.

HIGHER

LOWER

HANDLE

LOWER

LOOSEN LOWER

NUTS ON EACH

LOWER HANDLE

FIGURE 2.6

2.Move upper mower handle up or down until the desired position is achieved.

3.Tighten the lower nuts on each lower handle to maintain desired position.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents European 21 Steel Deck Walk Mowers M Model Series Slope Operation Protection for ChildrenPreparation Operation Maintenance and StorageTable of Contents Nomenclature FamiliarizationPrimer Bulb IntroductionPrimer Models Push & Non Commercial Self-Propelled Operating InstructionsPRE-START Check List Starting & Operation 2.2.1. Engine & BladePropelling Mower Handle Height AdjustmentStopping Recycling Operation Cutting Height AdjustmentOn Next MaintenanceService After First 5 Hours 3.2.1. Change Engine OIL Check Grease Level in TransmissionCheck Engine Drive Belt Service AnnuallyStorage Procedure Check Mower BladeNinja Blade Wear Limit Adjustments & RepairMower Blade Replacement 4.1.1. Standard Blade Wear Limit Blade SharpeningWheel Drive Control Adjustment Driven Disc Adjustment Driven Disc ServiceCleaning Drive Disc & Driven Disc Drive Spring Repair/ReplacementReplacing Rubber Driven Disc Ring Driven Disc Assembly Belt Service Pulley Position Transmission Poly-V Belt ReplacementProblem Probable Cause Corrective Action Troubleshooting100 Service Performed EachClean Sponge Element Engine Manual MAINTENANCE/REPLACEMENT PartsDecal Identification European Performance Disclaimer of Warranty Year Limited WarrantyPage European Steel Deck Walk Behind Mowers M Model Series
Related manuals
Manual 46 pages 20.32 Kb

EMRP216017B specifications

The Snapper EMRP216017B is a robust and efficient lawn mower designed for homeowners seeking a reliable solution for maintaining their lawns. Known for its exceptional performance and innovative features, this mower stands out in the competitive market of outdoor equipment.

One of the hallmark features of the Snapper EMRP216017B is its powerful engine. The mower is equipped with a dependable Briggs & Stratton engine, which is recognized for its durability and efficiency. This engine provides ample power to handle various grass types and terrains, ensuring a smooth and even cut every time.

The Snapper EMRP216017B boasts a unique rear-wheel drive system. This technology enhances maneuverability, allowing users to navigate around obstacles such as trees and flower beds with ease. The rear-wheel drive also ensures improved traction, particularly on slopes or uneven ground, making it an ideal choice for diverse landscapes.

Another significant aspect of the Snapper EMRP216017B is its Versamow System. This innovative feature allows users to mulch, bag, or discharge clippings with a simple lever adjustment. The versatility provided by this system not only promotes healthier grass growth but also saves time and effort, as homeowners can choose the best option for their lawn maintenance needs.

The mower also features a 21-inch steel mower deck, designed to provide a precise and clean cut. The durable construction of the deck ensures longevity, while its design allows for excellent airflow, which is essential for optimal clipping distribution. Furthermore, the adjustable cutting height feature gives users the flexibility to tailor the mower’s performance to their specific lawn conditions.

Comfort is another key characteristic of the Snapper EMRP216017B. The ergonomic handle is designed for user-friendly operation, reducing fatigue during extended mowing sessions. Additionally, the mower offers a convenient foldable design, making it easy to store in limited spaces.

In conclusion, the Snapper EMRP216017B is a comprehensive lawn care solution that combines power, versatility, and user comfort. Its advanced features, such as the Briggs & Stratton engine, rear-wheel drive, and Versamow System, make it an ideal choice for homeowners looking to maintain a beautiful lawn with minimal effort. Whether tackling a small yard or managing a larger landscape, this mower is engineered to deliver quality results every time.
Top Page Image Contents