Snapper P/N 7078274, BH500 manual Safety rules regarding outdoor power equipment, Training

Page 3

safetyrulesregardingoutdoorpowerequipment

2

IMPORTANT! READ CAREFULLY THE FOLLOWING SAFETY RULES BEFORE ASSEMBLING OR OPERATING UNIT.

TRAINING

--Read, understand, and follow all instructions in the man- ual and on the unit before starting. If the operator(s) or mechanic(s) can not read English it is the owner's responsi- bility to explain this material to them.

--Become familiar with the safe operation of the equipment, operator controls, and safety signs.

--All operators and mechanics should be trained. The owner is responsible for training the users.

--Only allow responsible adults, who are familiar with the instructions, to operate the unit.

--Never let children or untrained people operate or service the equipment. Local regulations may restrict the age of the operator.

--The owner/user can prevent and is responsible for acci- dents or injuries occurring to themselves, other people or property.

PREPARATION

--Evaluate the terrain to determine what accessories and attachments are needed to properly and safely perform the job. Use only accessories and attachments approved by the manufacturer.

--Wear appropriate clothing including safety shoes, safety glasses and ear protection. Long hair, loose clothing or jew- elry may get tangled in moving parts.

--Inspect the area where the equipment is to be used and remove all objects such as rocks, toys and wire, which can be thrown by the machine.

--Use extra care when handling gasoline and other fuels. They are flammable and vapors are explosive.

a) Use only an approved container.

b) Never remove fuel cap or add fuel with the engine run- ning. Allow engine to cool before refueling. Do not smoke. c) Never refuel or drain the machine indoors.

--Check that operator's presence controls, safety switches and shields are attached and functioning properly. Do not operate unless they are functioning properly.

OPERATION

--Never run an engine in an enclosed area.

--Operate only in the daylight or with good artificial light, keeping away from holes and hidden hazards.

--Be sure of your footing while using pedestrian controlled equipment, especially when backing up. Walk, don't run.

--Do not operate in reverse unless absolutely necessary. Always look down and behind before and while traveling in reverse.

--Be aware of the blower discharge direction and do not point it at anyone. Do not operate the blower without hose and bagger hood in place.

--Never leave a running unit unattended. Always stop

engine before leaving unit.

--Never operate with guards not securely in place. Be sure all safety features are attached, adjusted properly and func- tioning properly.

--Never operate with the hose or hood removed or altered.

--Do not change the engine governor setting or over speed the engine.

--Stop on level ground, shut off engine before leaving the operator's position for any reason.

--Stop equipment and inspect impeller blades after striking objects or abnormal vibration occurs. Make necessary repairs before resuming operations.

--Keep hands and feet away intake and discharge areas.

--Keep pets and bystanders away.

--Do not operate the unit while under the influence of alco- hol or drugs.

--Use caution when crossing roads and sidewalks. Stop engine if not blowing.

--Use care when loading or unloading the machine into a trailer or truck.

--Use care when approaching blind corners, shrubs, trees or other objects that may obscure vision.

SLOPE OPERATION

Slopes are a major factor related to loss-of-control and tip- over accidents, which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope, or if you feel uneasy on it, do not drive on it.

Do

--Mow up and down slopes, never across face.

--Remove obstacles such as rocks, tree limbs, etc.

--Watch for holes, ruts, or bumps. Uneven terrain could overturn the unit. Tall grass can hide obstacles.

--Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction.

Do Not

--Do not start or stop on a slope. If tires lose traction, pro- ceed slowly straight down the slope.

--Do not turn on slopes unless necessary, and then, turn slowly and gradually downhill, if possible.

--Do not use near drop-offs, ditches, or embankments. The operator could lose footing or balance or blower could sud- denly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.

--Do not operate on slopes with wet grass. Reduced foot- ing or traction could cause sliding.

--Do not operate machine on slopes in excess of 10 degrees (18% grade) when equiped with a grass catcher.

--Do not operate machine without weight kit installed when equiped with a grass catcher.

3

Image 3
Contents VAC Congratulations PreliminariesTraining Safety rules regarding outdoor power equipmentChildren Blower KIT Installation Unit assemblyUnit assembly Weight KIT Installation Hair Pins Unit assembly Introduction Unit operation & maintenanceGrass Catcher Maintenance Unit breakdown & parts list Snapper Z-Vac Blower Unit Group CZT / HZT Models Retaining RING, 1/2Belt Retainer Unit breakdown & parts list Belt Guard Snapper Z-Vac Blower Mount Group CZT / HZT ModelsNot Used Wing Locknut 5/16-18Unit breakdown & parts list Snapper Z-Vac Catcher Group CZT / HZT Models Unit breakdown & parts list Reinforcement Plate Snapper Z-Vac Catcher Mount Group CZT / HZT ModelsUnit breakdown & parts list Snapper Z-Vac Weight Bar Group CZT / HZT Models Unit breakdown & parts list Snapper Z-Vac Decal Group CZT / HZT Models Disclaimer of Warranty Warranty statementPage Page Page McDonough, GA 30253 U.S.A Manual No I.R /31/05

P/N 7078274, BH500 specifications

The Snapper BH500, part number 7078274, is a powerful and versatile piece of equipment designed to meet the needs of both professional landscapers and avid home gardeners. This reliable machine offers a perfect blend of advanced technology and user-friendly features, making it a preferred choice for lawn care.

One of the standout features of the Snapper BH500 is its robust 500cc engine. This engine is engineered for performance, providing ample power to handle a variety of mowing tasks efficiently. Its overhead valve design enhances fuel efficiency and reduces emissions, making it more environmentally friendly. The engine is also equipped with an easy-to-start system, ensuring that users can get to work quickly without the frustration of complicated starting procedures.

The BH500 boasts a durable steel cutting deck, which is available in various cutting widths to accommodate different types of lawns and landscapes. This cutting deck is designed for superior maneuverability and cutting efficiency, allowing users to achieve a clean and precise cut every time. The deck is also height-adjustable, providing flexibility for users to select the ideal cutting height based on their lawn’s specific needs.

In terms of technology, the Snapper BH500 is equipped with a patented cutting system that enhances grass discharge, ensuring a cleaner cut and better mulching capabilities. This system helps reduce clumping and makes it easier to maintain a healthy lawn. The machine is designed for ease of use, featuring ergonomic controls and a comfortable grip that minimize user fatigue during extended periods of operation.

Another notable characteristic of the Snapper BH500 is its innovative drive system. It features a self-propelling mechanism that allows users to navigate uneven terrain with ease. This feature is particularly beneficial for larger properties or areas with steep inclines, as it reduces the physical effort required from the operator.

Durability is a key attribute of the Snapper BH500, with high-quality materials used throughout its construction. The machine is built to withstand the rigors of regular use, ensuring longevity and reliability. With easy maintenance access and serviceability, users can keep their BH500 in peak condition with minimal hassle.

In summary, the Snapper BH500, P/N 7078274, is an exceptional lawn mower that combines power, efficiency, and ease of use. Its advanced features, including a robust engine, durable cutting deck, and innovative technologies, make it an ideal choice for anyone looking to maintain a beautiful lawn with minimal effort. Whether you are a professional landscaper or a homeowner, the Snapper BH500 is equipped to meet your mowing needs and exceed your expectations.