Snapper 7800600 Wheel Drive Control Adjustment Self-Propelled Models Only, Reprod Capscrew Uction

Page 15

Maintenance (Continued)

 

 

 

 

!

WARNING

!

G

B

A

 

 

 

 

 

DO NOT attempt any maintenance, adjustments or service

 

 

 

with engine and blade running. STOP engine and blade.

D

 

C

Disconnect spark plug wire and secure away from spark

 

 

 

plug. Engine and components are HOT. Avoid serious

 

F

 

E

burns, allow sufficient time for all components to cool.

 

 

 

 

 

Blade Sharpening (Continued)

4.Sharpen the blade on a grinding wheel at an angle of 22 to 28 degrees (B, Figure 20). DO NOT sharpen the blade beyond the original cutting edge (A).

 

A

Do not sharpen

C

beyond original

D

cutting edge

 

 

22-280

Reprod

 

 

(E) Capscrew

 

 

uction

 

 

 

B

 

Figu e 21: Wheel drive c tr l adjustment

 

 

 

End view of

 

2. To adjus , unh

k the upper spring (D) from the cable

 

 

 

blade assembly

 

 

eye and ro a e

he spring in the direction required to

A

 

 

 

 

extend or shorten the spring length.

 

 

 

 

 

3. Rehook the upper spring to the cable eye and check

 

 

 

 

 

 

clearance. Repeat the procedure if required.

Figure 20: Sharpening the mower blade

 

 

 

N te: The vinyl spring cover (B) should be kept over the spring at all

 

 

 

 

 

times except for adjustments.

5. Check blade for balance. If necessary, correct balance

4. If the wheel drive control fails to return quickly to the

by grinding heavy end of blade.

“OFF” position when released, check for binding at the

6. Reinstall blade (B, Figure 19). Note the corr

cable holdings located on the side of the right handle.

assembly order:

The upper clip should be located 2” below the upper

(A) Blade hub

knob; the lower clip should be 4” above the lower knob.

(B) Blade

The cable should slide freely with the clips installed at

(C) Blade flange (facing up)

these locations.

(D) Cone washer (concave side up)

 

7. Check torque of blade retaining cap screw.

 

Recommended torque should be 40 ft. lbs.

 

Wheel Drive Control Adjustment

(Self-Propelled Models Only)

1.The wheel drive control is properly adjusted when there is 1/16” to 1/8” clearance (G, Figure 21) between the inside of the spring hook (E) and the inside of the clutch cable eye (C) with the wheel drive control released.

Maintenance

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Reproduction For Reproduction Table of Contents Slope Operation Important Operator Safety InstructionsProtection for Children Preparation From Previous ColumnSafe Handling of Gasoline Operation Maintenance and StorageFeatures and Controls Engines Operation Pre-Start Check List Starting and OperationPropelling the Mower Handle Height AdjustmentOperation StoppingRemoving the Recycling Cover Operation Recycling OperationInstalling the Discharge Deflector Grass Catcher bags used Snapper products are made Installing the Grass BagInstalling the Recycling Plug Door Type BagChange Engine Oil Maintenance Maintenance IntroductionService After First 5 Hours Check Grease Level in TransmissionMaintenance Service PeriodicAge Pr cedure Mower Blade Replacement Standard Blade Wear LimitBlade Sharpening Reprod Capscrew Uction Wheel Drive Control Adjustment Self-Propelled Models OnlyDrive Spring Repair/Replacement Driven and Drive Disc ServiceProper driven disc adjustment Driven Disc AdjustmentAssembly, and secure with the retaining rings Using needle nose pliers, unhook the drive spring aEntitled Driven Disc Replacement Install a new rubber driven disc onto the driven discMaintenance Belt Service Hex ShaftBelts Transmiss on P ly-V Belt Replacement Driven Disc Replacement for driven disc removal ProcedureDrain the fuel tank before tipping the mower. Do not tilt Maintenance/Replacement Parts Service ScheduleProbable Cause Corrective Action TroubleshootingImproper electrolyte There is no other express warrantyNot For Not For Not For Not For Drive Belt Transm ss n Cutter BladeCutter Blade Ninja Quad Ive Belt Engine
Related manuals
Manual 28 pages 42.36 Kb

7800596, 7800597, 7800601, 7800602, 7800600 specifications

Snapper has long been known for its quality and innovation in outdoor power equipment, and their recent models, specifically the Snapper 7800596, 7800597, 7800600, 7800601, and 7800602, showcase this legacy perfectly. These lawn mowers combine power, ease of use, and technology to create a superior mowing experience.

The Snapper 7800596 and 7800597 are ideal for homeowners who desire robust performance. Both models are powered by a strong engine that offers reliable starts and efficient mowing. They feature a durable steel deck, ensuring longevity while withstanding the rigors of routine use. A standout feature is their adjustable cutting height, allowing users to choose between various grass lengths, ensuring a tailored cut for different lawn conditions.

Moving on to the Snapper 7800600 and 7800601, these models come equipped with advanced technologies that enhance user experience. The inclusion of a self-propelling mechanism significantly reduces the effort required by the operator, making mowing less of a chore. Furthermore, these mowers are designed with innovative blade technology, which optimizes cutting efficiency and grass discharge, resulting in a cleaner lawn finish.

The Snapper 7800602 rounds out this impressive lineup with its standout feature: a powerful battery-operated option. This model harnesses the latest in battery technology, ensuring longer run times and quicker charging capabilities. Moreover, it's environmentally friendly, producing zero emissions while providing the same power and performance expected from gas-powered models.

All models come with ergonomic handles for comfortable operation, and their lightweight design makes them easy to maneuver around obstacles in the yard. Additionally, snap-on components make maintenance a breeze, which is a vital feature for those seeking hassle-free ownership.

In summary, the Snapper 7800596, 7800597, 7800600, 7800601, and 7800602 models bring together cutting-edge technology, robust power, and user-friendly features. Whether you need a gas-powered mower for durable performance or an electric option for silent and clean operation, Snapper ensures that you'll find a suitable lawn mower among these well-engineered machines. With Snapper, lawn care becomes a task of ease and enjoyment, making it the perfect choice for homeowners looking to maintain their outdoor space efficiently.
Top Page Image Contents