Snapper 7800764 CRP218520 Operation Propelling the Mower Handle Height Adjustment, Lower handle

Page 8

Operation

Propelling the Mower

Handle Height Adjustment

1.

Start the mower.

For greater operator comfort, the height of the mower handle

2.

Move the ground speed control (A, Figure 4) to the

can be adjusted.

desired speed position.

1.

Loosen the lower nuts (A, Figure 5) on each

3. Squeeze the wheel drive control (B) against the handle

 

lower handle.

to engage the wheel drive and propel the mower

2.

Move the handle assembly (B) up or down until the

forward. Forward speed can be adjusted while the

 

desired position is achieved.

mower is moving by changing the position of the

3.

Tighten the lower nuts on each lower handle to maintain

ground speed control.

 

the desired position.

A

B

B

 

Reproduction

 

 

 

 

for

 

A

 

Figure 4: Mower drive controls

Not

Figure 5: Adjus

ng the handle height

 

 

Stopping the Mower

 

!

WARNING

 

!

1. Stop forward motion of the mower by releasing the

DO NOT attempt any maintenance, adjustments or service

wheel drive control.

 

with engine and blade running. STOP engine and blade.

2. Stop the engine and blade by releasing the blade

Disconnect spark plug wire and secure away from spark

control.

 

 

plug. Engine and components are HOT. Avoid serious

 

 

 

 

 

 

burns, allow sufficient time for all components to cool.

 

8

www.snapper.com

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Not For 7104669 Rev. ‘-’Complete the following information on your Snapper purchase ReproductionNot Table of Contents Operator Safety Protection for Children PreparationFrom Previous Column Slope OperationOperation Maintenance and StorageFrom Previous From Previous Column Features and Controls Orf NotOperation Before Starting Operation Propelling the Mower Handle Height Adjustment Start the mowerLower handle Ground speed control Desired positionOperation Mulching Recycling Operation Removing the Mulching CoverOperation Installing the Mulching Plug Dumping the Grass BagMaintenance Maintenance Introduction Check Grease Level in TransmissionService Periodic Sto age ProcedureCheck Transmission Poly-V Belt Engine Check Mower Blade Air FilterMaintenance Mower Blade ReplacementStandard Blade Wear Limit Blade SharpeningEnd view Blade assembly To adjust, unhook the upper spring D from the cableReproduction For Cable eye C with the wheel drive control releasedDrive Spring Repair/Replacement Cleaning Drive Disc & Driven DiscIf the drive disc and driven disc are clean and the mower Reprod uctionDriven Disc Adjustment Driven Disc Ring ReplacementReprod UctionReproduction For Not Driven Disc Bearing ReplacementDriven Disc Ring Replacement Replacing the Bearing On the Pulley End Hex ShaftBelts Transmiss on P ly-V Belt Replacement Engine Drive Belt Replacement Stretch Type BeltsDriven Disc Replacement for driven disc removal Procedure Drain the fuel tank before tipping the mower. Do not tiltChange oil every 25 hours when operating under heavy l ad Service ScheduleHigh temperatures Troubleshooting Warranty ReproductionNot For Not For Not For Slope Guide Product Specifications Common Service Parts Part Number

7800764 CRP218520 specifications

The Snapper 7800764 CRP218520 is a top-tier lawn mower renowned for its innovative design and robust performance. This mower is part of Snapper's commitment to delivering high-quality lawn care equipment that meets the needs of both homeowners and professional landscapers.

One of the standout features of the Snapper CRP218520 is its powerful 21-inch steel cutting deck. This sturdy construction ensures durability while efficiently handling various grass types. The cutting deck is designed with a deep dome shape, allowing for superior airflow and enhancing the mower’s mulching capability. With this technology, users can achieve a finely mulched lawn, which not only looks good but also provides essential nutrients back to the soil.

The mower is equipped with a reliable 163cc OHV engine. This engine provides ample power for tackling tough mowing tasks while delivering optimal fuel efficiency. The engine’s overhead valve design contributes to reduced emissions and quieter operation, making it an eco-friendly choice for environmentally-conscious consumers.

Another notable aspect of the Snapper CRP218520 is its user-friendly features. The adjustable handle height offers comfort for users of various heights, ensuring an ergonomic mowing experience. The easy-to-utilize lever allows for quick changes in cutting height, providing versatility to adapt to varying lawn conditions. Whether dealing with tall grass or maintaining a well-manicured lawn, this mower can be adjusted quickly to suit the task at hand.

For convenience, the Snapper 7800764 features a rear bagging design, which facilitates easy grass collection for cleanup or composting. This feature is perfect for homeowners who prefer a neat and tidy yard and want to minimize the effort required for post-mowing maintenance. Additionally, the mower boasts a side-discharge capability, offering even more options for grass management.

In terms of maneuverability, the Snapper CRP218520 is designed with all-terrain wheels that enhance traction and control, making it easier to navigate around obstacles like flower beds or trees. This thoughtful engineering adds to the mower's overall efficiency and makes mowing less of a chore.

With its combination of advanced technologies, robust features, and user-focused design, the Snapper 7800764 CRP218520 is an excellent choice for those seeking a reliable and efficient lawn mower. Whether for residential or professional use, this mower promises impressive performance to keep lawns looking their best.
Top Page Image Contents