Snapper 5900700 manual Lubrication, Grease, Oil, Lubricating the Front Casters

Page 27

Lubrication

Lubricate the unit at the locations shown in Figures 19 as well as the following lubrication points.

Grease:

•front caster wheel axles & yokes

•deck lift pivot blocks

•mower deck spindles

•mower deck idler arm

Use grease fittings when present. Disassemble parts to apply grease to moving parts when grease fittings are not installed.

Not all greases are compatible. Red Grease (p/n 5022285) is recommended, automotive-type high-temperature, lithium grease may be used when this is not available.

Oil:

•control handle pivots

•deck lift pivots

•discharge chute hinge

•neutral return pedal pivots

A

B

Regular Maintenance

Generally, all moving metal parts should be oiled where contact is made with other parts. Keep oil and grease off belts and pulleys. Remember to wipe fittings and surfaces clean both before and after lubrication.

Lubricating the Front Casters:

NOTE: Front casters should be lubricated annually.

1.Remove the 1/4-28 bolt (A, Figure 20) screwed into the front caster and install a 1/4-28 grease fitting.

2.Grease the front caster.

3.Remove the 1/4-28 grease fitting and reinstall the 1/4-28 bolt.

4.Repeat process for the other side of the machine.

A

Figure 20. Front Caster & Wheel

A. 1/4-28 Bolt

C

Maintenance

Figure 19. Lubrication Points

A. Mower Deck Lubrication Points B. Handle Bar Lubrication Points C. General Lubrication Points (Left Side Shown, Right Side points identical.)

25

Image 27

Contents Briggs & Stratton Power Products Group DescriptionModel Number Date Purchased Table of Contents Operating Safety Read the ManualChildren Safety Rules & Information Slope Operation Thrown ObjectsMoving Parts Enclosed Areas Fuel and MaintenanceOperation Do Not Periods of exposureSafe Handling of Gasoline Maintenance and StorageSafety Decals Operator SafetyNorth American Safety Icons Safety Interlock SystemOperational Safety Checks Safety IconsIdentification Numbers Features and ControlsForward Speed Control Lever Reverse Speed Control Levers Features and ControlsIgnition Switch Control FunctionsFeatures & Controls General Operating Safety OperationChecks Before Starting Pushing the Mower By Hand Check Tire PressuresTo Adjust the Cutting Range Cutting Height AdjustmentTo Adjust the Cutting Height Starting the Engine Impact HazardStopping the Mower Driving The Mower To Move Forward and SET Forward Speed See FigureTo Move Backward See Figure To make a right-hand turn See Figure To make a left-hand turn See FigureTall Grass Requires Incremental Cutting MowingMowing Recommendations Height of GrassMowing Methods How Much Grass to Mulch Proper MulchingMulching Requires Excellent Mowing Conditions Engine Speed & Ground Speed for MulchingMaintenance Schedule Safety Items Before Every SpringHours Fall Check Unit for Loose Hardware Fuel Filter Regular MaintenanceEngine Maintenance Checking / Adding FuelLubricating the Front Casters LubricationGrease OilChange Interval Every 200 Hours Replacement Filter Number Check / Fill Transmission OilTransmission Oil Filter Change Servicing The Mower Blades Inspecting the Mower BladesNever weld or straighten bent mower blades Balancing the Mower Blade Nail Reinstalling the Mower BladesNeutral Adjustment Speed Balancing AdjustmentTo Reduce the Speed of the Faster Wheel Snapper Pro dealer Parking Brake AdjustmentTo Level the Mower Deck Deck Leveling AdjustmentTo avoid damaging belts, do not PRY Belts Over Pulleys Mower Belt Replacement31,1 cm 12- 1/4Use extreme caution when removing this spring Transmission Drive Belt ReplacementReverse Speed Control Levers Comfort Adjustment Lock Nut Reverse Speed Control Levers Comfort AdjustmentLong Term Storage Longer Than 30 Days StorageStarting After Long Term Storage Temporary Storage 30 Days Or LessProblem Cause Remedy TroubleshootingTroubleshooting Chart Troubleshooting the MowerNot drive Troubleshooting the Mower DeckTroubleshooting Common Cutting Problems Troubleshooting13 HP* Kawasaki SpecificationsSpecifications Engine Power Rating InformationSlope Indentification Guide Page Page Page Snapper PRO Limited Warranty Product Specifications Common Service Parts