Snapper 421622BVE Stopping ENGINE, Wheel DRIVE, Blade 2.4.1. Engine, Mower Blade

Page 10

Section 2 - OPERATING INSTRUCTIONS

WARNING

DO NOT leave machine with the engine running. Stop engine. Stop blade. Shift to neutral. Engage parking brake. Remove key.

2.4STOPPING - ENGINE, WHEEL DRIVE, BLADE 2.4.1. ENGINE

1.Stop engine by turning key to the “OFF” position. See Figure 2.13.

TURN TO “OFF”

POSITION

KEY

FIGURE 2.13

2.4.2. WHEEL DRIVE

1.Stop motion of Rear Engine Rider by pushing clutch/brake pedal all the way “DOWN” to apply brake. See Figure 2.14.

WARNING

Once blade is disengaged, it should come to a complete stop in 3 seconds or less. If the blade continues to rotate after 3 seconds, the blade brake must be adjusted. Refer to Section “BLADE BRAKE ADJUSTMENT” for adjustment procedures or return machine to an authorized SNAPPER dealer for adjustment. DO NOT CONTINUE to operate machine until blade brake is adjusted and functioning properly.

2.4.3. MOWER BLADE

1.Stop mower blade by releasing blade pedals or moving blade lever rearward to the “OFF” position. See Figure 2.15.

TO APPLY BRAKES, PUSH CLUTCH/BRAKE PEDAL ALL THE WAY DOWN.

CLUTCH/BRAKE PEDAL

PARK BRAKE

LATCH SHOWN

ENGAGED

FIGURE 2.14

BLADE LEVER IN “OFF” POSITION

FIGURE 2.15

(Continued on Next Page)

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Rear Engine Riding Mower Series Manual No -4388 Rev 1, 8/27/01Important Safety Instructions Operation Table of Contents Introduction NomenclatureOPERATOR’S Seat Adjustment Front to Rear Adjustment PRE-START Check ListStarting & Operation Engine Electric Start On NextEngine Electric Start Starting & OperationEngine Manual Start Starting & Operation 2.3.3. Mower Blade Wheel DriveStopping ENGINE, Wheel DRIVE, Blade 2.4.1. Engine Mower BladeStopping ENGINE, Wheel DRIVE, Blade 2.4.4. Park Brake Cutting Height AdjustmentDo not park the machine on slopes Reverse Lockout Mechanism Reverse Lockout Mechanism OverrideAdjusting Mower Blade Service After First 5 HoursService Engine AIR Cleaner Check Mower Blade Change Engine OILTOP View of Belt Routing Service After First 5 Hours 3.2.4. Check Blade Drive BeltService Brake / Park Brake Blade BrakeClean Mower Deck Service Every 25 Operating HoursBattery Fluid Level Lubrication Grease FittingsEngine Service AnnuallyFuel Filter Storage OUT of Season Every TWO YearsRemoving Fuel Tank Mower Drive Belt Adjustment Engine Adjustments & RepairBlade Brake Adjustment Mower Deck Adjustment Side To Side LevelnessFront to Rear Levelness Service BRAKE/PARK Brake Adjustment Adjustment From Previous Mower Blade Replacement 4.4.1. Blade Wear LimitsBlade Sharpening Blade Drive Belt ReplacementBelt Removal Belt Replacement Battery Battery Removal Battery InstallationNEW Battery Preparation 1. Remove battery from carton Battery ServiceBattery Storage Battery TestingSnapper Rear Engine Rider Accessories Problem Probable Cause Corrective Action StopCutting Grass Loss Of TractionBlades Not Cutting ImproperlySubject Service Reference To be Performed PagesYear Limited Warranty Disclaimer of WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Copyright 2001` Snapper INC ALL Rights Reserved
Related manuals
Manual 32 pages 21.46 Kb

421622BVE specifications

The Snapper 421622BVE is a versatile and powerful lawn mower designed for both residential and commercial use, making it an excellent choice for groundskeepers and homeowners alike. This mower blends performance and durability with innovative features that set it apart in the competitive lawn care market.

One of the standout features of the Snapper 421622BVE is its robust engine. It is powered by a reliable 150cc Briggs & Stratton engine, which provides ample power for cutting through thick grass and tackling uneven terrain. The engine is designed for easy starting and requires minimal maintenance, allowing users to spend more time mowing and less time dealing with equipment issues.

The mower is equipped with a 21-inch cutting deck, which offers a perfect balance between maneuverability and cutting efficiency. This size is especially beneficial for homeowners with smaller to medium-sized yards. The cutting deck features a three-in-one design that allows users to switch between bagging, mulching, or side discharging grass clippings, depending on their preference and lawn care needs.

Another notable characteristic of the Snapper 421622BVE is its ergonomic design. The handle is adjustable, allowing users of varying heights to find a comfortable grip while mowing. This feature helps reduce operator fatigue, which is especially important during extended mowing sessions. Additionally, the mower’s lightweight construction makes it easy to maneuver around obstacles in the yard.

The Snapper 421622BVE also incorporates several cutting technologies that ensure a clean and even cut. The patented variable-speed rear-wheel drive system provides excellent traction and control, allowing users to tackle hills and slopes with ease. The dual-bearings in the wheels enhance durability, ensuring that the mower can withstand rugged use.

Safety features are paramount in the design of the Snapper 421622BVE. It includes a safety key that must be inserted to start the mower, preventing unauthorized use. The blade brake feature ensures that the blades stop quickly when the operator releases the handle, providing additional safety for the user.

In conclusion, the Snapper 421622BVE is a well-rounded lawn mower that combines power, efficiency, and safety features into an exceptional package. Its robust engine, versatile cutting options, ergonomic design, and innovative technologies make it a perfect choice for anyone looking to maintain a healthy and beautiful lawn.
Top Page Image Contents