Troubleshooting

The remote control unit is too far from the receiver or out of the effective range.

Operate the remote control within the effective range.

The batteries are exhausted.

'Short pin's not insert EQ jack When speaker A and B is selected Simultaneously, but speaker B is Not connection.

DIGITAL, DTS, DOLBY PRO LOGICII or 3 STEREO.

The surround back speaker cable connection is incomplete Surround mode is not EX/ES mode.

Surround back = NONE has been selected in SPEAKERS Configuration.

SURROUND mode button is not set to DOLBY

One or more rear speaker wires is not making good contact.

Use surround or stereo source.

Source being played is not recorded or broadcast in surround sound or stereo.

SURROUND ON/OFF button is set to OFF.

Surround Effects

<Important :> The center and rear speakers only operate when the unit is set on a Surround Sound mode and the source material being played is recorded or broadcast in Dolby Digital EX, DTS/ES, Dolby Pro LogicII surround sound. Stereo broadcasts or recordings will produce some rear channel effects when played in a surround mode. However, mono sources will not produce any sound from the rear speakers.

No sound from the Surround speakers.

Insert the 'short pin'Connect the speaker both A and B.

Select speaker A only

Replace with new batteries.

Connect the cable correctly.

Set surround mode EX/ ES Make the correct setting.

Set the button to Dolby Digital EX, DTS/ES, Dolby Pro LogicII or 3 STEREO.

Check all rear speaker wires for good connection.

Set the button to the desired surround mode position.

Probable Cause

Speakers are connected wrong.

Power line of a fluorescent light is installed near this product.

One of the input cords is disconnected. The BALANCE control is set to one side.

Speaker impedance is less than prescribed for this unit.

A/B Speaker selectors are turned off. Speaker polarity (+/ ) is reversed.

A slight noise may be heard because the method used for modulation of FM stereo broadcasts is different than that used for monaural broadcasts.

Poor location and/ or direction of the antenna.

Transmitting station is too far away. Broadcast signals are being disturbed.

Speaker system connections are not correct.

To determine any problem with your receiver, always check the most obvious possible causes first. If any problem still remains after your have checked the items below, consult your nearest Eltax dealer.

Problem

Amplifier

When listening to the music in stereo, left/right speakers sounds reversed.

Low hum or buzzer sound.

Sound is only heard from one channel.

Sound cuts off during listening to the music or no sound even though power is ON.

No sound.

Low bass response.

Tuner

An unusual hissing noise is heard when listening to the broadcast in stereo, but not heard when listening monaurally.

Noise is excessive in both stereo and monaural broadcasts.

Sound is distorted and/or the volume level becomes low.

Excessive distortion in the sound of stereo broadcasts.

No sound from the center speaker.

No sound from the surround back speaker

No suond from the front speaker.

Remote Control Unit

Remote control not working.

Remedy

After checking, if needed, reconnect.

Place this product as far away as possible from electric devices with interference.

Connect the input cords securely.

Adjust the BALANCE control.

After turning off the power and then turning it on again, reduce the volume or change to the correct 8 ohm speakers.

Press the A or B speaker selector as applicable.

Check all speakers for correct polarity.

Try reducing the treble sound by turning the treble controls.

Try changing the location, height and/or direction of the antenna.

Set the FM mode to monaural by pressing the STEREO/ MONO button. (Note that the broadcast will then be heard as monaural sound).

I f an indoor antenna is being used, change to an outdoor antenna.

Try using an antenna with more elements.

unit

AVR-800 specifications

The Eltax AVR-800 is a versatile and robust audio-video receiver designed to enhance home theater systems. Its sleek design and comprehensive feature set make it an attractive option for any audio enthusiast or casual listener alike.

One of the standout features of the Eltax AVR-800 is its support for multiple audio formats. It provides exceptional sound quality thanks to its ability to handle Dolby Digital, DTS, and PCM audio formats. This versatility allows users to enjoy an immersive surround sound experience, whether watching movies, playing video games, or listening to music. The receiver's powerful amplification ensures that every audio detail is delivered with clarity and depth, making it an excellent choice for both dynamic action scenes and subtle musical performances.

In terms of connectivity, the Eltax AVR-800 is equipped with numerous input and output options to accommodate various devices. With multiple HDMI inputs, users can easily connect their Blu-ray players, gaming consoles, and streaming devices. The receiver also includes traditional audio inputs, such as RCA and optical connections, allowing for the integration of older devices. The AVR-800 supports 4K video passthrough, ensuring that users can enjoy high-definition content without compromising on video quality.

The Eltax AVR-800 is designed with user convenience in mind. Its intuitive interface and remote control provide easy navigation through menus and options, allowing users to adjust settings quickly. The built-in digital signal processing (DSP) features several pre-set sound modes, which can be tailored to enhance different types of audio content. This adaptability ensures that users can enjoy an optimized listening experience regardless of the source material.

Another notable characteristic of the AVR-800 is its multi-room capability, which allows audio to be enjoyed in different areas of the home. This feature enables users to streamline their audio setup, expanding the reach of their sound system and creating a more cohesive audio experience throughout the space.

In summary, the Eltax AVR-800 is a powerful and feature-rich audio-video receiver suitable for a wide range of users. Its support for various audio formats, extensive connectivity options, user-friendly interface, and multi-room capabilities make it an ideal choice for anyone looking to elevate their home entertainment experience. Whether you are a seasoned audiophile or a casual viewer, the Eltax AVR-800 offers the performance and versatility to meet your audio needs.