Before Use, Read this before operation

Read this before operation

<Choose the installation location of your unit carefully. Avoid placing it in direct sunlight or close to a source of heat . Also avoid locations subject to vibrations and excessive dust, heat, cold or moisture.

<The ventilation holes should not be covered. Make sure there is enough space above and beside t he amplifier/ receiver (about 4 inches). Do not place a CD player or other equipment on top of the amplifier/receiver.

<Do not open the cabinet as this might result in damage to the circuitry or electrical shock. If a foreign object should get into the set, contact your dealer.

<When removing the power plug from the wall outlet, always pull directly on the plug, never yank the cord.

<Do not attempt to clean the unit with chemical solvents as this might damage the finish. Use a clean, dry cloth.

<Keep this manual in a safe place for future reference.

Back-up Memory Function

This is the function which preserves the preset memory and most-recent memory functions. In the event of a power failure, or if the power cord of this unit is disconnected from the electric outlet, the back-up memory will preserve the preset memory and most-recent memory functions for as long as approximately 3 days.

If the power supply is interrupted for 3 days or longer, the memory settings will be erased.

When to Use RESET Switch

<When this system is subjected to an electrical shock.

<When the power is irregular.

In these cases, try the following

Press the TUNING MODE button for more than 5 seconds.

Note:

If the TUNING MODE button is pressed for more than 5 seconds Standby mode, all the memory will be erased.

Before Use

Before Connection

CAUTION

Turn off the power of all the equipment before making connections.

Read instructions of each component you intend to use with this unit.

<Be sure to insert each plug securely. To prevent hum and noise, do not bundle the connection cords with the power cord or speaker cord.

Speaker Connections

Caution:

To avoid damaging the speakers with a sudden high-level signal, be sure to switch the power off before connecting the speakers.

< Check the impedance of your speakers.

Connect speaker with an impedance of 8 ohms or more. The amplifier's red speaker t erminals are t he + (positive) terminals and the black terminals are the _ (negative) terminals.

<The + side of the speaker cable is marked to make it distinguishable from the _ side of the cable. Connect

this marked side to the red + terminal and the unmarked side to the black terminal.

<Prepare the speaker cords for connection by stripping off approximately 10 mm or less (no more as this could cause a short-circuit) of the outer insulation.

Twist the wires tightly together so that they are not straggly :

How to connect

Press the lever, insert the stripped and twisted end (approx. 3/8") of the cord, then release the lever : Make sure it is fastened securely by pulling the cord lightly.

AVR-800 specifications

The Eltax AVR-800 is a versatile and robust audio-video receiver designed to enhance home theater systems. Its sleek design and comprehensive feature set make it an attractive option for any audio enthusiast or casual listener alike.

One of the standout features of the Eltax AVR-800 is its support for multiple audio formats. It provides exceptional sound quality thanks to its ability to handle Dolby Digital, DTS, and PCM audio formats. This versatility allows users to enjoy an immersive surround sound experience, whether watching movies, playing video games, or listening to music. The receiver's powerful amplification ensures that every audio detail is delivered with clarity and depth, making it an excellent choice for both dynamic action scenes and subtle musical performances.

In terms of connectivity, the Eltax AVR-800 is equipped with numerous input and output options to accommodate various devices. With multiple HDMI inputs, users can easily connect their Blu-ray players, gaming consoles, and streaming devices. The receiver also includes traditional audio inputs, such as RCA and optical connections, allowing for the integration of older devices. The AVR-800 supports 4K video passthrough, ensuring that users can enjoy high-definition content without compromising on video quality.

The Eltax AVR-800 is designed with user convenience in mind. Its intuitive interface and remote control provide easy navigation through menus and options, allowing users to adjust settings quickly. The built-in digital signal processing (DSP) features several pre-set sound modes, which can be tailored to enhance different types of audio content. This adaptability ensures that users can enjoy an optimized listening experience regardless of the source material.

Another notable characteristic of the AVR-800 is its multi-room capability, which allows audio to be enjoyed in different areas of the home. This feature enables users to streamline their audio setup, expanding the reach of their sound system and creating a more cohesive audio experience throughout the space.

In summary, the Eltax AVR-800 is a powerful and feature-rich audio-video receiver suitable for a wide range of users. Its support for various audio formats, extensive connectivity options, user-friendly interface, and multi-room capabilities make it an ideal choice for anyone looking to elevate their home entertainment experience. Whether you are a seasoned audiophile or a casual viewer, the Eltax AVR-800 offers the performance and versatility to meet your audio needs.