Snapper 2811523BV (7084940) Replaces, Used on 11 & 13HP Engines, Used on 12.5 & 13 HP Briggs

Page 53

ELECTRICAL SYSTEMS (For 10, 11, 12, 12.5 & 13HP Briggs)

Item

Part No

Qty

Description

Note

1

7060753

1

KIT, 12 Volt Dry Charge Battery, 220 CCA

 

2

7075671

1

SOLENOID, Super-Trombetta

replaces 7018817

3

7022788

1

HARNESS, Starter Wiring (Briggs Engines)

 

4

7073715

1

HARNESS, Ignition Wiring (Briggs Engines)

 

5

7016168

1

HOLDER, Fuse (Includes Fuse)

 

--

7016169

1

FUSE, 10 Amp (Not shown)

 

6

7063064

1

INTERLOCK MODULE, Briggs

was 28606

7

7028386

1

HARNESS (Deck Interlock Wiring)

 

8

7018524

1

SWITCH, Deck Interlock (NO)

 

9

7012444

1

COVER, Battery Cable

 

10

7019326

1

WIRE, Positive (Red, 17” long)

 

11

7073797

1

SWITCH, Ignition, 4 Terminal, Indak

 

12

7090880

1

WASHER, 5/8” Internal Tooth Lock

 

13

7015438

1

NUT, 5/8-32 Hex

 

14

7011138

1

IGNITION KEY, Pair

 

15

7090539

3

SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap

 

16

7022886

1

SWITCH, Operator Presence Control (OPC) Traction (NC/NO)

 

17

7091576

4

NUT, 1/4-20 Hex, GR 5 or B

 

18

7090053

2

WASHER,1/4” Internal Tooth Lock

 

19

7027172

2

SCREW, 1/4-20 x 5/8” Hex Head Cap. GR 5

 

20

7028027

1

WIRE, Negative, Black (15” long)

 

21

7028607

1

HARNESS, Operator Presence Control (OPC) Wire

 

22

7091576

1

NUT, 1/4-20 Hex, GR 5 or B

 

23

7012080

2

CABLE TIE, 7”

 

24

7090372

2

NUT, 1/4-20 Hex Center Lock, GR 5 or B

 

25

7014451

1

CABLE TIE

 

26A

7029211

1

SWITCH, Seat (NC)

used on 11 & 13HP Engines

26B

7023354

1

SWITCH, Seat (NC)

used on 12.5 & 13 HP Briggs

 

 

 

 

only

Footnotes:

REAR ENGINE RIDER

 

Manual No.

7006152

SERIES 23

53

TP 400-5003-5-RE-N

Page 52 Page 54
Image 53
Page 52 Page 54
Contents Rear Engine Rider Series Page Table Of Contents WHEELS- Front & Rear Includes Items 5, 14 Includes Items 2, 3, 4, 510 HP Used on 8, 10, 11.5, 12.5Front END, Steering Replaces 7072648 voided Includes itemUsed on 25, 28 & 30 Decks Used on 33 & 42 DecksFront END, Steering Front END, Steering Main Case & L.H. Fender Used on E331523KVE Model Replaces 7022509 voidedOnly Used on Euro models onlyMain Case & L.H. Fender Cross Brace Used on 331723BVE Model onlyLeft Hand Fender & Bearing Or quantity as required BEARING, DXDIFFERENTIAL, R. H. Fender Properly to prevent binding Includes 1-1/8 I.D. DX bearingDIFFERENTIAL, R. H. Fender 7075479 KIT, Long & Short Axle Includes items 23, 24 Yoke Lift Components Fender WASHER, 5/16 Primary Chain Case & Smooth Clutch Includes the following 5 items Includes the following 16 itemsReplaces 7054243 voided Or 7090480, center lock flangeGear Shifter Assembly Used with Part of Speed Adjustment LatchAssy Fuel Tank & Seat Used on 2811523BV Used on 12HP & Higher Models3011523BV Used on 9, 10 & 11.5HP ModelsENGINE, MUFFLER, Drive Disc Electric start Recoil startUsed on 28 & 30 Decks Used on 33 Deck ModelsCutting DECKS, Deflector 28 & 33 Hi-Vac Bracket fasteners Painted deck w/decals & wheelPainted deck with decals Incl. items 15, 16, 18, 19Cutting DECKS, Deflector 28 & 33 Hi-Vac Used on 28 & 33 Decks Cutting DECK, Deflector Or 7091518 3/8-24 Hex Nyloc BELTS, BRAKES, Interlock Used on 33 Deck Models only BELTS, BRAKES, Interlock BELTS, BRAKES, Interlock RAILS, Lift ARMS, CAM Lift RAILS, Lift ARMS, CAM Lift RAILS, Lift ARMS, CAM Lift Anchor Blade Stop Pedals Replaces 7035669 .062 dia Spindle Used on 33 deck Decals DECAL, Snapper Not shown, not a service partElectrical Systems For 9, 11 & 11.5HP Briggs Recoil Used on 11-1/2 HP Engines Used on 11 & 13 HP EnginesElectrical Systems For 10, 11, 12, 12.5 & 13HP Briggs Used on 12.5 & 13 HP Briggs ReplacesUsed on 11 & 13HP Engines Electrical Systems For 13.5, 15, 16 & 17HP Briggs For use with 7075071 seat Electrical Systems For 11 & 13HP Honda Manufacturer No Snapper part numberPurchase from engine Electrical Systems For 15HP Kohler Replaces Electrical Systems Briggs Magneto Ground Electrical Systems Briggs Magneto Ground Electrical Systems Kohler Magneto Ground View shows engine magneto ground area Wiring Schematic 9, 11 & 11.5HP Recoil Start Briggs Wiring Schematic incl. harness #s 7028386, 7073714 Wiring Schematic 10, 11, 12, 12.5 & 13 HP Briggs Wiring Schematic incl. harness #s 7022788, 7073715 Wiring Schematic 13.5, 15, 16 & 17 HP Briggs Engines Wiring Schematic incl. harness #s 7022788, 7074406 7015430 Wiring Schematic 11 & 13 HP Honda Engines Wiring Schematic incl. harness #s 7054589, 7074962 7074963 Wiring Schematic 14 & 15 HP Kohler Engines Wiring Schematic incl. harness #s 7019321, 7074405 7028678 Hardware Bags For manual start models Hardware Bags Hardware Bags Accessories & Attachments Drive Discs Used on All RER AluminumUsed on All series 7 & Newer ModelsPage Page Rear Engine Rider Series

301123BV (84873), 301123BV (84941), 281023BVE (84871), 281123BV (84872), 281123BVE (84874) specifications

The Snapper 2813523BVE (85624), 2811523BV (7084940), 281123BV (84872), 281223BVE (85622), and 281123HVE (84883) represent a versatile range of outdoor power equipment that embodies the combination of performance and innovation that Snapper is known for. These models cater to a wide array of landscaping needs, making them suitable for both residential and commercial applications.

One of the main features of these Snapper models is their powerful engines. They are equipped with robust motors that provide ample torque and speed, enabling users to tackle various mowing conditions with ease. The engines are designed for fuel efficiency and low emissions, making them environmentally friendly choices for lawn care.

These models also showcase advanced cutting technologies. With multiple cutting heights adjustable with ease, users can achieve the perfect lawn finish. The decks on these models are engineered for enhanced airflow, ensuring a clean and efficient cut. Additionally, the side-discharge, mulching, and bagging options provide flexibility to accommodate different mowing preferences and yard conditions.

Another standout feature of the Snapper models is their user-friendly design. Each model is equipped with ergonomic handles that provide comfort during operation, reducing user fatigue. The intuitive controls and robust wheels enhance maneuverability, making it easier to navigate through tight spots and uneven terrain.

Furthermore, durability is a significant characteristic of the Snapper 281 series. Built with heavy-duty materials, these lawn mowers are designed to withstand the rigors of regular use, ensuring longevity and reliability. They also require minimal maintenance, allowing users to spend more time enjoying their lawns rather than maintaining equipment.

Safety is another priority in the design of these models. They come equipped with features such as blade brakes and safety switches, which are crucial in preventing accidents during operation. Users can operate with confidence knowing that safety measures are in place.

In summary, the Snapper 2813523BVE (85624), 2811523BV (7084940), 281123BV (84872), 281223BVE (85622), and 281123HVE (84883) represent a comprehensive solution for outdoor maintenance. With their powerful engines, advanced cutting technologies, user-friendly design, durable construction, and emphasis on safety, these models stand out in the competitive market of lawn care equipment, providing a reliable and efficient option for users looking to maintain their landscapes effectively.
Top Page Image Contents