Snapper 215015 Service Performed Each, USE HRS Season, MAINTENANCE/REPLACEMENT Parts

Page 13

SERVICE SCHEDULE

ITEM	SERVICE PERFORMED	REF.	EACH	5	25	50	100	EACH
			USE	HRS	HRS	HRS	HRS	SEASON
Engine Oil	Check Oil Level	Page 6	X

	Initial Oil Change	Page 9		X

	Periodic Oil Change	Page 9			X*

Air Pre-Cleaner	Clean Sponge Element	Engine Manual			X**
		& Page 9.
Air Cleaner	Clean or Replace	Engine Manual.			X**

Spark Plug	Replace	Engine Manual.					X

Engine Cooling	Clean Shroud & Fins	Engine Manual					X**
System
Mower Blade	Check For Wear, Damage	Page 10-11	X
	& Replacement
Mower Deck	Clean Debris	Page 9	X
	Accumulation

*Change oil every 25 hours when operating under heavy load or high temperatures. **Clean more often under dusty conditions or when air debris is present

4.2. MAINTENANCE/REPLACEMENT PARTS

MAINTENANCE PARTS

Engine Speed Control (Briggs Engines)	2-9036
Blade Control Cable (See Parts Manual)	7-2933
Cutter Blade (Mulching)	1-7168
Cutter Blade (Not Air Lift Compatible)	2-6691
Cutter Blade (Ninja - Quad Edge)	2-6407
Parts Manual for 21” Steel Deck Walk Behind Mower	06059
Series 12, 14, 15 & 16

13

Image 13

Contents Series Designation Model Number Explanation Cutting Width Engine Horse PowerImportant Safety Instructions Operation Table of Contents Introduction FamiliarizationNomenclature PRE-START Check List Operating InstructionsStarting & Operation 2.2.1. Engine & Blade Cutting Height Adjustment Handle Height AdjustmentStopping Recycling Operation Service After First 5 Hours 3.2.1. Change Engine OIL MaintenanceService Annually Storage ProcedureMower Blade Replacement 4.1.1. Standard Blade Wear Limit Repair & AdjustmentsBlade Sharpening 1A. Ninja Blade Wear LimitDo not Sharpen Beyond Original Cutting Edge Problem Probable Cause Corrective Action TroubleshootingMAINTENANCE/REPLACEMENT Parts Service Performed EachUSE HRS Season Disclaimer of Warranty Year Limited WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Page Steel Deck Walk Behind Mowers Series