Installation Instructions
38” & 42” Mulch Kit
Mfg. Nos. 1694955 & 1694956
For
4 |
6
1
2
5 |
Kit Contents: |
| 3 | |
Ref. | Part No. | Qty. | Description |
1 | 721387A | 1 | COVER, Mulch |
2 | 720125 | 1 | NUT, Wing, |
3 | 1931333 | 2 | CARRIAGE BOLTS, |
4 | 1732373 | 2 | BLADES, for 38” Mower Deck |
4 | 1732374 | 2 | BLADES, for 42” Mower Deck |
5 | 1933988 | 2 | NUT, Push, 5/16 |
6 | 1733098 | 1 | KNOB, Plastic, |
Figure 1. Contents
WARNING
Before beginning any service work turn off the PTO, set the parking brake, turn off the ignition, remove the key, and disconnect the spark plug wire(s). Mower blades have sharp edges. Avoid contact with edges. Wear gloves while handling.
INSTALLATION
1.Remove mower deck (see “Mower Deck Removal and Installation” in the Operator’s Manual).
2.See Figure 2. Remove the old blades. Use a block of wood to prevent blade rotation. Loosen the nut by turning it counterclockwise.
3.Remove the spring washers (B, Figure 3), blade nut (C), and blade.
LOOSEN |
Figure 2. Blade Removal
B |
A |
D |
C |
|
|
Figure 3. Blade Installation
A.4x4 Wood Block
B.Spring Washers
C.Blade Nut
D.Wings
1